Table of Contents
Advertisement
Quick Links
Instruction Manual
CORDLESS OSCILLATING
MULTI-TOOL
CAUTION: Before using this tool, please read this manual completely,
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
Model:
v. 1.1
POX2-M-EU
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
English
Advertisement
Table of Contents
Related Manuals for Senix POX2-M-EU
Summary of Contents for Senix POX2-M-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v.
-
Page 2: Table Of Contents
Check with your When operating a power tool outdoors, Local Authority or local store for use an extension cord suitable for recycling advice. outdoor use. Use of a cord suitable for EN - 2 SENIX.COM.AU... - Page 3 Slippery handles and grasping surfaces do dust collection can reduce dust-related not allow for safe handling and control of hazards. the tool in unexpected situations. Do not let familiarity gained from 5. Battery Tool Use And Care 3 - EN SENIX.COM.AU...
-
Page 4: Vibration And Noise Reduction
WARNING! Take the following points into account to minimize the vibration and noise exposure Use only SENIX X2 batteries (B20X2/B25X2/ risks. B40X2/B50X2/B60X2/B80X2) and chargers (CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU). • Only use the product as intended by its design and these instructions. -
Page 5: Intended Use
INTENDED USE This oscillating multi-tool is intended for sawing, sanding and cutting wood-based materials, plastic, plasterboard, non-ferrous metals and mounting elements (e.g. nails, clamps). Do not use it for other purposes. 5 - EN SENIX.COM.AU... -
Page 6: Know Your Unit
� � � � � � � � � APPLICATIONS Model: POX2-M-EU As an oscillating multi-tool Sawing, sanding and cutting wood-based materials, plastic, plasterboard, non-ferrous metals and mounting elements (e.g. nails, clamps). Spindle Flush Cut Blade LED Light Sanding Pad... -
Page 7: Assembly
SPECIFICATIONS* step-by-step and use the pictures provided as a visual guide to easily assemble the product! Do not insert Model POX2-M-EU the battery pack before the power tool is completely assembled or Input Voltage 18 V (20 V MAX) adjusted! -
Page 8: Operation
Fig. 6 Keep hands away from blades. Do not reach underneath work or around or over the blade while blade is moving. Do not attempt to ADJUSTING THE SPEED remove cut material when blade is moving. EN - 8 SENIX.COM.AU... -
Page 9: Led Worklight
NOTE: • When performing a cutting or sawing operation it is recommended to start with the tool in speed "4". This helps to improve 9 - EN SENIX.COM.AU... -
Page 10: Maintenance
TRANSPORTATION Only carry by its handle/grip area. Protect from any heavy impact or strong vibrations which may occur during transportation. Secure to prevent it from slipping or falling over. EN - 10 SENIX.COM.AU... -
Page 11: Trouble Shooting
Battery pack reaches its life cycle Replace with new battery pack Electronic components Restart the product after overheated cooling down Product stops suddenly Overcurrent Restart the product Unsatisfactory result Worn remove blade or sandpaper Replace with a new one 11 - EN SENIX.COM.AU...
Need help?
Do you have a question about the POX2-M-EU and is the answer not in the manual?
Questions and answers