Table of Contents
Advertisement
Quick Links
Instruction Manual
Model:
PDWX2-M3-EU
CORDLESS IMPACT WRENCH
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
v. 1.1
English
SENIX.COM.AU
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Senix PDWX2-M3-EU
Summary of Contents for Senix PDWX2-M3-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com v. 1.1 English SENIX.COM.AU...
-
Page 2: Table Of Contents
Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Use the battery in a maximum temperature of 50°C (122°F). Max 122°F EN - 2 SENIX.COM.AU... -
Page 3: Safety Instructions
The use of a cord suitable for outdoor use safer at the rate for which it was designed. reduces the risk of electric shock. Do not use the power tool if the switch 3 - EN SENIX.COM.AU... - Page 4 Do not use this tool if you Shorting the battery terminals together may EN - 4 SENIX.COM.AU...
-
Page 5: Intended Use
Do not • Follow all charging instructions and do use it for other purposes. not charge the battery pack or equipment outside of the temperature range specified SAVE THESE INSTRUCTIONS 5 - EN SENIX.COM.AU... -
Page 6: Know Your Unit
KNOW YOUR UNIT APPLICATIONS Model: PDWX2-M3-EU As a cordless impact wrench: Tightening or loosening bolt, nut, or other fastener. Anvil Forward/Reverse Switch Variable Speed Trigger Overmold Grip Area Control Panel Work Lamp Belt Clip EN - 6 SENIX.COM.AU... -
Page 7: Specifications
WARNING: The scope of delivery varies depending on the country and purchased variant: Only use accessories specifically Model of PDWX2-M3-EU recommended for this tool. An improper sized • Impact wrench x1 socket may cause hazard. • Belt clip x1 Always remove battery pack before changing •... -
Page 8: Rotation Direction
OPERATION SPEED A suitable working speed will ease your operation. Adjust to a desired speed in WARNING: advance by pressing the speed control button. Always wear eye, hearing, hand protection to EN - 8 SENIX.COM.AU... -
Page 9: Switching On/Off
Turn on the light and use a hand torque wrench for final tightening. adjust brightness by pressing the button on the control panel. The light shuts off automatically shortly after the trigger is OVERHEAT PROTECTION released. 9 - EN SENIX.COM.AU... -
Page 10: Maintenance
CLEANING 1. Clean dust and debris from air vents. 2. Keep the handle clean, dry, and free of oil or grease. 3. Make sure the anvil is free of debris. EN - 10 SENIX.COM.AU... -
Page 11: Troubleshooting
Product does not reach full power Battery pack reaches its life Replace with a new battery pack cycle Socket is damaged Replace with new socket Unsatisfactory result Socket not suitable for Use proper socket intended operation 11 - EN SENIX.COM.AU...
Need help?
Do you have a question about the PDWX2-M3-EU and is the answer not in the manual?
Questions and answers