Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kingfisher ERI1020PLS
Summary of Contents for Kingfisher ERI1020PLS
- Page 1 EN 18V 20cm Cordless Pole Saw ERI1020PLS ORIGINAL INSTRUCTIONS 5059340904788 IMPORTANT - These instructions are for your safety. (UK) Please read through them thoroughly prior to handling the product and retain them for future reference. 5059340904559 (EU) MNL_ERI1020PLS_EN_V01_240628...
- Page 2 EN Parts 01. x1 02. x1 03. x1 04. x1 05. x1...
-
Page 3: Table Of Contents
EN You will need EN Contents Product description Safety Technical specification Before you start Functions & Settings Operation Care and maintenance Guarantee Declaration of conformity... -
Page 4: Product Description
EN Product Description Guide bar On/off switch Saw chain Rear handle Sprocket wheel Battery docking port Side cover knob Guide bar cover Side cover Drive sprocket Head lock button Tension pin Threaded sleeve Anti-slip serration Gripping surface Mounting bolt Extension pole Air vents Oil tank cap Harness... -
Page 5: Work Area Safety
EN Safety General power machine safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference The term “machine”... -
Page 6: Personal Safety
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and gerators. There is an increased risk of electric shock refri if your body is earthed or grounded. Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk of electric shock. - Page 7 Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or Carrying battery pack, picking up or carrying the machine.
- Page 8 Machine use and care Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it was designed. Do not use the machine if the switch does not turn it on and off.
- Page 9 Use the machine, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the machine for operations different from those intended could result in a hazardous situation. Keep handles and grasping surfaces dry, clean and free from oil and grease.
-
Page 10: Pole Saw Safety Warnings
Do not use a battery pack or machine that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. Do not expose a battery pack or machine to fire or excessive temperature. - Page 11 Hold the machine by insulated gripping surfaces only, because the saw chain may contact hidden wiring. Saw chains contacting a “live” wire may make exposed metal parts of the machine “live” and could give the operator an electric shock. Maintain a firm grip, with both hands on the pole saw and position your body and arm to allow you to resist any kickback forces.
-
Page 12: Causes And Operator Prevention Of Kickback
Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may be injured by the machine during operation. Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control. - Page 13 • When cutting a branch be alert for kickback. When the branch is broached it can bend down and jam the saw chain. • Only use replacement saw chains and bars specified by the manufacturer. Incorrect replacement of saw chains and bars may cause chain breakage and/ or kickback.
- Page 14 c) Don’t maintain the battery pack on the charger when not in use. After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain the maximum performance. e) Longer life and better performance can be obtained if the battery is charged when the air temperature is between 18°C and 24°C.
- Page 15 2. Ensure that the product is in good condition and well maintained. 3. Use correct application tools for the product and ensure they in good condition. 4. Keep tight grip on the handles/grip surface. 5. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
-
Page 16: Residual Risks
Switch off and disconnect from the power supply if there are malfunctions. Have the product checked by a qualified professional and repaired, if necessary, before you operate it again. Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. - Page 17 WARNING! This product produces an electromagnetic field during operation! This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their doctor and the medical implant manufacturer before operating this product!
- Page 18 Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (direct /min or min Per minute current voltage) Milliampere per...
- Page 19 Keep the pole mounted powered pruner a sufficient distance away from electrical power lines. Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. In general, children must not come near the area where the product is.
-
Page 20: Technical Specification
The product complies with the applicable Your product European directives and an evaluation method of conformity for these directives was done. UK Conformity Assessed. Rating label explanation Cordless Pole Saw: ERI1020PLS ER= Brand name( Erbauer) I=18V Lithium-Ion 1020=Serial number PLS=Pole Saw... - Page 21 Battery pack (may not be included) > Model no. ERT1044BAT ERT1045BAT > Type Li-Ion Li-Ion > Voltage / 36V / 36V > Capacity 8 Ah / 4Ah 6 Ah / 3 Ah > Weight approx. XX kg approx. XX kg Charger for battery pack (may not be included) >...
-
Page 22: Before You Start
EN Before you start Unpacking Unpack all parts and lay them on a flat, stable surface. Remove all packing materials and shipping devices if applicable. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 23 EN Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! WARNING! Disconnect the battery pack from the machine before making any assembly, adjustments, changing accessories, or storing machine. Such preventive safety measures reduce the risk of starting the machine accidentally.
- Page 24 Installing the guide bar and saw chain Use only a guide bar (1) and saw chain (2) according to the technical data of the pole saw. Spread the saw chain (2) out with the cutting edges of the chain pointing in the direction of rotation.
-
Page 25: Chain Lubrication
Refit the cover (5), fit the rear of cover then front, ensure mounting bolt is located in position. Then fully tighten the side cover knob (4) by turning it clockwise to make sure the chain is correctly tightened (Fig. 6). NOTE: If the chain gets loose, turn the side cover knob counterclockwise to release the tension pin, then fully tighten the knob clockwise. - Page 26 Assembling / dissembling the extension pole WARNING! This extension pole is designed to only be used with ERI1020PLS. Never use it with other attachments. The extension pole (9) increases the machine length by XX cm, extending the cutting range.
- Page 27 Follow the process in the section Assembling / dissembling the poles to install the extension pole (9) between the pole saw attachment and power head (Fig. 9). NOTE: Once assembled correctly, the pole saw attachment, extension pole and the power head should not separate when pulled. Always test the connection by pulling them.
-
Page 28: Battery Pack
The harness (22) can be buckled or released with shoulder strap loop (23) by the quick- release mechanism. WARNING! Always attach the product to the harness. Do not carry it only with your hands! Battery pack Attaching / releasing the battery pack Slide the battery pack into the battery docking port (15) until it is securely locked in position. -
Page 29: Functions & Settings
EN Functions & settings Intended use This pole saw ERI1020PLS is designated with a rated voltage of 18 V. The product is intended for cutting limbs with a thickness of max. 200 mm. It must not be used for cutting other materials, such as plastic, stone, metal or wood that contains foreign objects. -
Page 30: Operation
Press down the lock-off button (12) with your right thumb, then fully depress the on/off switch (13) with your index fingers and hold it in this position. (Fig. 13) 12 13 Release the on/off switch (13) to switch the product off. WARNING! The product will continue to work for some time even after the motor has been switched off! Wait until it comes to a complete stop before you put the product down! -
Page 31: General Operation
WARNING! If the saw chain shows any signs of moving stop the motor immediately! Wait for all moving parts to stop! Contact a qualified specialist to have a check! General operation Check the product, its battery pack and charger as well as accessories for damage before each use. - Page 32 Kickback WARNING! Beware of kickback! Kickback can lead to dangerous loss of control of the product and result in serious or fatal injury to the operator or anyone standing close by! Always be alert because rotational kickback and pinch kickback are major product operational dangers and the leading cause of most accidents! 1.
- Page 33 Always hold the product at an angle of not more than 60° from the horizontal level. Otherwise safe operation is not possible (Fig. 16). Never stand directly under the limb you are sawing. Objects may fall different than expected. Always position yourself out of the path of falling limps (Fig. 17). Keep other persons away from cutting end of product and at a safe distance from the work area.
-
Page 34: After Use
10. Beware when reaching the end of the cut. The weight of the product may change unexpectedly as it cuts free from the wood. Accidents can occur to the legs and feet. Always remove the product from a wood cut while it is running. NOTE: The chain must be running at full speed before it comes into contact with the wood. -
Page 35: Care And Maintenance
EN Care and maintenance The golden rules for care WARNING! Always switch the product off, remove the battery pack and let the product cool down before performing inspection, maintenance and cleaning work! Keep the product clean. Remove debris from it after each use and before storage. Regular and proper cleaning will help ensure safe use and prolong the life of the product. -
Page 36: Guide Bar
and inject grease until it appears at the outside edge of the sprocket (3) (Fig. 24). Rotate the saw chain (2) by hand. Repeat the lubrication procedure until the entire sprocket (3) has been greased. Guide bar Most guide bar problems can be prevented merely by keeping the product well maintained. Incorrect filling and non-standard cutter and depth gauge settings are the causes of most guide bar problems, primarily resulting in uneven bar wear. -
Page 37: Saw Chain Sharpening
Clear residue from the rails on the guide bar (1) by using a screwdriver, putty knife, wire brush or other similar tool. This will keep the oil passages open to provide proper lubrication to the bar (1) and chain (2) (Fig. 26) Check the guide bar ‘rail’... - Page 38 WARNING! Only sharpen the saw chain yourself if you are trained and have experience! Use proper tools to sharpen the saw chain! The height difference between the tooth and the ridge is the cutting depth. When sharpening the saw chain (2) you have to consider the following points (Fig. 28). •...
- Page 39 Use a depth gauge measuring instrument to check the height of the depth gauge. Depth gauge measuring jigs are available from most reputable tool merchants (Fig. 30). Cutting tip Cutter length Top plate File position Depth gauge setting 0.025’ Spare parts / Replacement parts The following parts of this product may be replaced by the consumer.
-
Page 40: Troubleshooting
Attach transportation guards, if applicable. Always carry the product on its handles. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles. Secure the product to prevent it from slipping or falling over. Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. -
Page 41: Recycling And Disposal
Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is working properly. -
Page 42: Guarantee
This guarantee is in addition to and does not affect your statutory rights relating to faulty goods as a consumer. Manufacturer: Kingfisher International Products Limited 1 Paddington Square, London, W2 1GG, United Kingdom www.kingfisher.com/products Distributor: B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom www.diy.com... -
Page 43: Availability Of Spare Parts
EN Customer care and technical helpline A better way to repair your tools Kingfisher takes special care in creating high-quality garden power tools that are designed to last. But if a fault develops with your garden power tool and you need to claim under the... -
Page 44: Declaration Of Conformity
Nazwa i adres producenta lub jego upoważnionego przedstawiciela: Denumirea și adresa producătorului sau a reprezentantului său autorizat: Nombre y dirección del fabricante o de su representante autorizado: Nome e endereço do fabricante ou do respetivo mandatário: Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands This declaration of conformity is issued under the sole responsibility of the manufacturer. - Page 45 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2000/14/EC as amended Outdoor Noise Directive 2016/1628/EU Regulation Gaseous and Particulate Pollutant Emission Limits 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité...
- Page 46 și deținător al dosarului tehnic/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands...
- Page 47 Product • Cordless Pole saw • 84017/ERI1020PLS • Serial number 00001-99999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 1 Paddington Square London W2 1GG United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
- Page 48 Manufacturer : EN www.diy.com UK Manufacturer: To view instruction manuals online, 1 Paddington Square, London, W2 1GG, United Kingdom EU Manufacturer: Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands...
Need help?
Do you have a question about the ERI1020PLS and is the answer not in the manual?
Questions and answers