Summary of Contents for CANARMNA harmonizedhome DOWNROD MOUNT CF-24A NLGT
Page 1
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70. Consult a qualified electrician if you are not familiar with wiring. Questions, problems, missing parts? Before returning to the store, call CANARMNA Customer Service 8 a.m. - 5 p.m., EST, Monday-Friday. 1-800-265-1833 ressalescanada@canarmna.ca IMPORTANT: Please read and understand this manual before any assembly.
Table of Contents Table of Contents ..............2 Assembly ................6 Operation ................11 Safety Precautions ............. 2 Troubleshooting ..............12 Warranty ................3 Pre-Installation ..............3 Maintenance ..............13 Installation ................6 Safety Precautions READ AND SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of personal injury, DO NOT bend the blade brackets when installing the brackets, balancing the 1.
NOTE: These are approximate measures. They do not include the amps and wattage used by the light kit. TOOLS REQUIRED Wire Phillips Flat blade Adjustable Electrical cutter / screwdriver screwdriver wrench tape stripper Step ladder ressalescanada@canarmna.ca Please contact 1-800-265-1833 for further assistance.
Assembly MOUNTING BLADES TO MOTOR □ Remove the blade screws, lock washers and metal washers on □ Remove the rubber stops on the motor (E). the motor (E). □ Attach the blade (F) to the fan motor assembly (E) using the blade screw, lock washer and metal washer removed in the previous step.
Depending on the slope, a longer downrod may be required to prevent fan blades from hitting the ceiling. Outlet box Screws (not provided) ressalescanada@canarmna.ca Please contact 1-800-265-1833 for further assistance.
Assembly (continued) ELECTRICAL HOOK-UP GROUND SUPPLY WHITE CIRCUIT Direct wiring to an external variable speed wall control or dimmer BLACK 120V RECEIVER switch of this fan and or external light kit will void warranty and OUTLET make fan and light inoperable. BLACK □...
Page 9
Place the remote control (G) into the wall bracket. □ Position and tighten the two screws and washers (marked “a” on diagram) then tighten the two screws (marked “b” on diagram). Washer Screw Wall bracket Washer ressalescanada@canarmna.ca Please contact 1-800-265-1833 for further assistance.
Operation USING THE REMOTE CONTROL Operation buttons on the remote: ① ① LED indicator light ② ON/OFF the fan ② ③ Speed of the fan (① low speed - ⑤ high speed) ④ Timing control of the fan ③ ⑤ Direction of the fan (reverse switch) ⑤...
□ Make sure canopy and mounting bracket are tightened securely to wooden joist. □ Make sure warpage has not occurred in wooden blades. If so, contact the customer service department for replacement parts. ressalescanada@canarmna.ca Please contact 1-800-265-1833 for further assistance.
Maintenance □ When properly maintained, fans can be expected to give years of trouble free operation. □ Properly maintained fans must be inspected every 3 months for vibration and wear on the support mechanism and that all screws, nuts, etc. are tight. □...
Need help?
Do you have a question about the harmonizedhome DOWNROD MOUNT CF-24A NLGT and is the answer not in the manual?
Questions and answers