Advertisement
Quick Links
CP-3D
12/20
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
A
L
L
A
T
I
O
N
Model: CP48D, CP56D, CP60D, CP48DW, CP56DW, CP60DW
INSTRUCTIONS PE RTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INST RUCTIONS
IMPO RTANT SAFETY
!
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
Consult a qualified electrician if you are not familiar with wiring.
Note to Installer
You are obligated to pass these instructions on to building
maintenance or location Supervisor for
maintenance of this product.
TOOLS AND MATERIALS REQUIRED
-
Screwdriver
-
Screwdriver
- Wiring supplies as required by electrical code.
NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS
2157 Parkedale Ave.,
Brockville, Ontario
K6V 5V6
PH: (613) 342-5424
FX: (613) 342-8437
I
N
S
T
R
U
C
T
I
O
N
S
I
N
S
T
R
U
C
T
I
O
N
S
- Wire Cutters
- Step Ladder
2555 Rue Bernard
Lefebvre Laval, Quebec
H7C 0A5
PH: (450) 665-2535
FX: (450) 665-0910
Advertisement
Related Manuals for CANARMNA CP48D
Summary of Contents for CANARMNA CP48D
- Page 1 CP-3D 12/20 Model: CP48D, CP56D, CP60D, CP48DW, CP56DW, CP60DW INSTRUCTIONS PE RTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INST RUCTIONS IMPO RTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC, NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS 1. Turn off power at main electrical service box before starting installation. 2. Electrical connections must comply with local code ordinances, national electrical codes, CEC, NEC and ANSI/NFPA 70. 3. Remove fan from the carton carefully and check for shipping damage. Check blades for bends and dents. -
Page 3: Hanging & Assembly
• HANGING & ASSEMBLY • 1. Using Machine Threaded Hooks for Steel Frame Ceiling (Fig. 1) - Put the threaded J-Hook through junction box, winding nut to bottom of thread. - Insert the hook with the box through slit in bottom of open web steel joists. - Put large washer, lock washer and nut on the hook loosely. - Page 4 KNOT CRIMP Figure 1 Reference Numbers: i l i i t n i t a & & i t n t l o i t c Figure 2 Pg. #4...
-
Page 5: Electrical Hook-Up
ELECTRICAL HOOK-UP Make the following wire connections to the receiver unit (see fig.3 ) using the wire nuts supplied. Connect GREEN fan wire to BARE Copper wire or GREEN househeld supply wire. Connect BLACK fan wire to BLACK household supply wire. Connect WHITE fan wire to WHITE household supply wire. - Page 6 INSTALLATION OF W ALL CONTROL - Carefully push wire nuts into the UL or CSA approved outlet box after connections. - Install the mounting plate to the outlet box by 2 outlet box screws (not supplied). - Push front cover firmly onto the control unit. - Load: Fan 3.0A (MAX).
- Page 7 • TROUBLESHOOTING • Trouble: Suggestion: 1. Fan will not start. - Check fuses and circuit breakers - Check wiring connections to fan. - Check wiring connections in lower canopy. Caution: Turn power off for last two items. 2. Fan sounds noisy. - Check to make sure all screws in motor are snug.
- Page 8 • OPTIONAL FAN GUARD • Dimension Guard Size CP93-56KD 61” 26” Note: In applications where fan may be damaged (i.e. Gymnasium, or in applications where maintenance cannot or will not be done), the above illustrated fan guard should be used. Pg.
- Page 9 • MAINTENANCE • - When properly maintained, fans can be expected to give years of trouble free operation. - Properly maintained fans must be inspected every 3000 hours for vibration and wear on the support mechanism and that all screws, nuts, etc.
- Page 10 Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: CANARMNA Responsible Party CanarmInc. 808 Commerce Park Drive, Ogdensburg, New York, USA 13669 1-800-267-4427 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 11 10 YEAR WARRANTY • Models: CP48D, CP56D, CP60D, CP48DW, CP56DW, CP60DW These models are guaranteed to be free from defects in workmanship and material for a period of ten (10) years from date of purchase. Within the first (1) year from date of purchase any defective product should be returned to your RETAIL OUTLET along with proof of purchase.