HP dx2100 - Microtower PC Service & Reference Manual page 20

Setup Utilities and Diagnostics Features
Heading Option
Power Power On After
Management Power-Fail
Setup
(continued)
MODEM Use IRQ
Resume by PME
Wake on Device
S5
Resume by Alarm
Date (of Month)
Alarm
Time (hh:mm:ss)
Alarm
PnP/PCI Reset
Configuration
Configurations
Data
Resources
Controlled By
2–10
Allows you to select system power loss behavior:
• Last State
• On
• Off
Allows you to select IRQ for MODEM to use. Select NA to
disable external MODEM wake-up function.
• NA
• 3
• 4
• 5
• 7
• 9
• 10
• 11
Disables/enables Resume by PME.
Disables/enables wake device from network.
Disables/enables RTC alarm.
If Resume by Alarm is enabled, allows you to select the day of
the month for resumption of RTC alarm.
If Resume by Alarm is enabled, allows you to select what time
the RTC alarm will resume.
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup, if you
have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the OS cannot boot.
Allows you to select whether resources are controlled
automatically or manually:
• Auto (ESCD–Extended Storage Configuration Data)
• Manual
BIOS can automatically configure all the bootable and Plug-
and-Play-compatible devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address fields since BIOS
automatically assigns them.
404569-001
Description
Service Reference Guide, dx2100 MT