HP dx2100 - Microtower PC Service & Reference Manual page 18

Setup Utilities and Diagnostics Features
Heading Option
Advanced HDD S.M.A.R.T.
BIOS Features Capability
(continued)
Boot Up NumLock
Status
Security Option
Hyper-Threading
Technology
APIC Mode
MPS Version
Control for OS
OS Select for
DRAM > 64MB
BIOS Write
Protection
Advanced PCI Express Root
Chipset Port Func
Features
On-Chip Frame
Buffer Size
(VGA Setting)
DVMT Mode
(VGA Setting)
DVMT/FIXED
Memory Size
(VGA Setting)
Init Display First
(VGA Setting)
2–8
Disables/enables S.M.A.R.T. capability.
Allows you to set the default NumLock status to off or on.
Allows you to set the security option to Setup or System so that
the password is required every time the system boots or only
when entering Computer Setup.
Disables/enables hyper-threading (only available for operating
systems that are optimized for hyper-threading technology).
Disables/enables the APIC mode.
Allows you to set the MPS table version to:
• 1.1
• 1.4
Allows you to select Non-OS2 or OS2. Select OS2 only if
running an OS2 operating system with greater than 64MB of
RAM on the system.
Disables/enables BIOS upgrading.
Allows you to set PCI Express Port 1 to:
• Auto
• Enabled
• Disabled
Allows you to set PCI-e Compliancy Mode to:
• v1.0a
• v1.0
Allows you to set On-Chip Frame Buffer Size to:
• 1MB
• 8MB
Allows you to set DVMT Mode to:
• Fixed
• DVMT
• Both
Allows you to set memory size to:
• 64MB
• 128MB
Allows you to set initial PCI clock detection to:
• PCI Slot
• Onboard
404569-001
Description
Service Reference Guide, dx2100 MT