Computer Setup (F10) Utility
Computer Setup (Continued)
Heading
Option
Power
Resume by PME
Management
Wake on device S5
Setup
Resume by Alarm
(continued)
Date (of Month) Alarm
Time (hh:mm:ss) Alarm
PnP/PCI
Reset Configuration Data
Configurations
Resources Controlled By
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
14
Description
Disables/enables Resume by PME.
Disables/enables wake device from network.
Disables/enables RTC alarm.
If Resume by Alarm is enabled, allows you to
select the day of the month for resumption of
RTC alarm.
If Resume by Alarm is enabled, allows you to
select what time the RTC alarm will resume.
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to
reset Extended System Configuration Data
(ESCD) when you exit Setup, if you have
installed a new add-on and the system
reconfiguration has caused such a serious
conflict that the OS cannot boot.
Allows you to select whether resources are
controlled automatically or manually:
• Auto (ESCD–Extended Storage
Configuration Data)
• Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields since BIOS automatically assigns them.
www.hp.com
Computer Setup (F10) Utility Guide