Virtual Appliance Installation - Compaq dc7700 - Convertible Minitower PC User Manual

Business pc with intel vpro processor technology and virtual appliances

Hide thumbs Also See for dc7700 - Convertible Minitower PC:

Table of Contents

The HP Compaq dc7800p Business PC is an Intel vPro processor technology branded system that meets

all Intel vPro processor technology hardware requirements and supports VA 2.6.

In addition to the hardware requirements, HP recommends that the system has a minimum of 1-GB RAM.

Virtual Appliance Installation

Currently, VA 2.0 and VA 2.6 must be installed on a system with Windows XP 32-bit. The system must

meet or exceed the hardware and BIOS requirements mentioned in the previous sections.

The following provides an example of a VA 2.6 appliance installation:

Run the VA Setup file.

Follow the directions from the installer.

Reboot the system.

If necessary, enable VT in F10 Setup, and then reboot.

Go into the MEBx by pressing Ctrl+P during POST.

Type the MEBx password.

Select Intel AMT Configuration.

The VA Configuration option will now be available at the bottom of the AMT Configuration list.

Figure 1

VA Configuration option in the MEBx

Table of Contents

Do you have a question about the dc7700 - Convertible Minitower PC and is the answer not in the manual?

Dc7800 - convertible minitower pc Dc7800p