Removing A Drive From The Multibay - HP d538 - Convertible Minitower Desktop PC Hardware Reference Manual

Hardware Upgrades

Removing a Drive from the MultiBay

1. Exit all software applications, turn off the computer properly through the
operating system, then turn off any external devices.
2. Remove the MultiBay security screw, if it has been installed. Refer to the
"Uninstalling the MultiBay Security Screw"
the MultiBay security screw.
3. Slide the eject lever 1 to the left to eject the drive from the MultiBay 2.
Removing a Drive from the MultiBay
2-34
section for instructions on removing
Hardware Reference Guide