Dateq MDM-CON1 Quick Manual

Panel operation instructions
To show name and IP address, press and hold the rotary for 5 seconds
Press the button on the knob, and the second line of the menu interface will start flashing,
indicating entering editing mode.
Use the knob to turn left or right to change the value.
Press the button on the knob again to exit editing mode and return to menu mode.
Common troubleshooting
When the panel light is not on, check if the network cable or switch is working properly.
Note
To ensure the reliable use of equipment and the safety of personnel, please follow the following
precautions during installation, use, and maintenance
Be careful not to scratch the surface of the panel when installing it;
Maintain a good temperature in the working environment;
Avoid using in damp and dewy environments;
Do not spill any corrosive chemicals or liquids on or near the equipment.
.
MDM-CON1