Advertisement
Quick Links
Installation Guide
Beverage Faucet and Optional Water Filtration
System
K-6665, K-6665-F
K-6666, K-6666-F
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page "Français-1"
Español, página "Español-1"
1015061-2-G
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kohler K-6665-F
Summary of Contents for Kohler K-6665-F
- Page 1 Installation Guide Beverage Faucet and Optional Water Filtration System K-6665, K-6665-F K-6666, K-6666-F M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página “Español-1” 1015061-2-G...
-
Page 2: Tools And Materials
Do not use chemical cleaners. The water filtration system must be mounted vertically. Do not use this water filter system with a standard faucet that uses hot and cold inlets. A single inlet faucet, such as a Kohler beverage faucet, must be used. 1015061-2-G... - Page 3 filter components after 10 years. Replacement date:___________ Retain this installation guide for future use. Kohler Co. reserves the right to make revisions in the design of faucets without notice, as specified in the Price Book. Kohler Co.
- Page 4 From under the sink, slide the hole in the bracket onto the stud. Tighten the nut against the bracket to secure the faucet body to the sink. If you are not installing the optional water filtration system, proceed to the ″Connect the Supply″ section of this guide. 1015061-2-G Kohler Co.
- Page 5 filter head. Thread the taped end of each nipple into the inlet and outlet port of the filter head until finger tight plus one turn maximum. The nipple hex should not make contact with the filter head. Kohler Co. 1015061-2-G...
- Page 6 Mark the mounting hole locations with a pencil. Set the unit aside. Pre-drill the holes, if necessary. Partially thread the screws into the cabinet wall and slide the mounting bracket over the screws. Secure the screws into the cabinet wall. 1015061-2-G Kohler Co.
- Page 7 O-rings. Align the groove in the top of the cartridge with the word ″OFF″ on the filter head. Insert the top of the cartridge into the filter head and turn the cartridge counterclockwise 90° until hand-tight. Kohler Co. 1015061-2-G...
-
Page 8: Installation Checkout
NOTE: The faucet inlet hose will connect directly to a 3/8″ male compression fitting. Connect the faucet inlet hose to the cold water supply. 6. Installation Checkout Turn on the main water supply and check for leaks. Repair as needed. 1015061-2-G Kohler Co. - Page 9 For all other filters, run the faucet for two minutes. Any air left in the system may temporarily cause the water to be cloudy. If the optional water filtration system has not been installed, run water through the faucet for one minute to remove any debris. Kohler Co. 1015061-2-G...
Need help?
Do you have a question about the K-6665-F and is the answer not in the manual?
Questions and answers