Advertisement
Quick Links
AIR CONDITIONER
OPTIONAL PARTS
INSTALLATION MANUAL
For authorized service personnel only.
INSTALLATIONSANLEITUNG
MANUEL D'INSTALLATION
Pour le personnel agréé uniquement.
MANUAL DE INSTALACIÓN
MANUALE D'INSTALLAZIONE
Ad uso esclusivo del personale autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
Απομακρυσμένος αισθητήρας
Για εξουσιοδοτημένο προσωπικό σέρβις.
MANUAL DE INSTALAÇÃO
РУКОВОДСТВО ПО УСТАНОВКЕ
Для уполномоченного персонала.
KURULUM KILAVUZU
Uzaktan kumanda sensörü
Remote sensor
Fernbedienungssensor
Nur für autorisiertes Personal.
Capteur distant
Sensor remoto
Solo para personal autorizado.
Sensore remoto
Sensor remoto
Apenas para técnicos autorizados.
Дистанционный датчик
Yetk l serv s personel ç nd r.
PART No. 9366394068-02
Advertisement
Related Manuals for Fujitsu UTY-XSZXZ1
Summary of Contents for Fujitsu UTY-XSZXZ1
- Page 1 AIR CONDITIONER OPTIONAL PARTS INSTALLATION MANUAL Remote sensor For authorized service personnel only. INSTALLATIONSANLEITUNG Fernbedienungssensor Nur für autorisiertes Personal. MANUEL D’INSTALLATION Capteur distant Pour le personnel agréé uniquement. MANUAL DE INSTALACIÓN Sensor remoto Solo para personal autorizado. MANUALE D’INSTALLAZIONE Sensore remoto Ad uso esclusivo del personale autorizzato.
- Page 2 CONTENTS PART No. 9366394068-02 1. SAFETY PRECAUTIONS ..............................1 2. ACCESSORIES .................................. 1 3. MOUNTING ..................................1 3.1. Selecting the mounting position ..........................1 3.2. Wiring (sensor wiring) ..............................2 3.3. Installation ................................... 2 4. WIRING TO AIR-CONDITIONER ............................2 5.
- Page 3 3.2. Wiring (sensor wiring) Cable Remove the screws from the remote sensor, and remove the cover. M3 screw Connect the cable to the remote sensor as shown below. Ensure that the wires do not contact each other. Shield wire* Tightening torque M3 screws to connect the cable 0.5 to 0.6 N·m (5 to 6 kgf·cm) Remote...
- Page 4 5. CHANGING THE ROOM TEMPERATURE CORRECTION VALUES ① DIP switch on the printed circuit board inside the electronic control unit was set at the factory Remote for sensing the intake air into the indoor unit. sensor ② The following changes must be made to the settings of DIP switch if the unit is to be used with the remote sensor (sensing the room temperature).
Need help?
Do you have a question about the UTY-XSZXZ1 and is the answer not in the manual?
Questions and answers