Subscribe to Our Youtube Channel
Related Manuals for One Link GL-MDV208
Summary of Contents for One Link GL-MDV208
- Page 1 Transcend WATER MECHANICAL DI USER GUIDE • EN For DIEHL Mechanical Pre-Equipped Models...
-
Page 2: Table Of Contents
Table of contents About Specifications Setting up your meter (Snap-fit) Setting up your meter (Pin) Installing the GL Utilities Water MDI Activating the device through the GL Activation App Monitoring the GL Utilities Water Mechanical DI... -
Page 3: About
About WATER MECHANICAL DI Turn your standard meter into a smart meter! We integrate the pulse converter and telemetry into a single, customized Plug&Play device. The GL Water Mechanical DI is a Bluetooth Low Energy (BLE) device that enables the use of Group Link™ patented technology. It uses a transmission frequency of 2.4 GHz, compatible with the vast majority of existing smartphones. -
Page 4: Specifications
Specifications GL Utilities Water Mechanical DI Product Model GL-MDV208 Bluetooth Technology Bluetooth LE 5.1 Bluetooth Operating Frequency 2.4GHz Bluetooth Transmission Power +19.5dBm Power Source 3.6Vdc Temperature rating -25 ºC to 75 ºC Dimensions (H/W/D) 29mm x 78mm x 83mm Weight... -
Page 5: Setting Up Your Meter (Snap-Fit)
Transcend IoT Setting up your meter Removing the lid from your DIEHL Mechanical Pre-Equipped Model (snap-fit) Remove the lid by pulling it forward Lift the lid into a horizontally 90 degree angle as shown in the picture Push the lid downward This procedure applies until you hear a “click"... -
Page 6: Setting Up Your Meter (Pin)
Transcend IoT Setting up your meter Removing the lid from your DIEHL - Mechanical Pre-Equipped Model (attached by pin) Detach the lid by pulling it upward vertically as shown in the figure This procedure applies specifically With the help of a for DIEHL mechanical screwdriver, push the pre-equipped models with... -
Page 7: Installing The Gl Utilities Water Mdi
Transcend IoT With the device duly Installing your GL Water Mechanical DI locked onto the the meter, insert the seal through the access located on the back of the Before proceeding, look at the GL Water Mechanical DI containment latches located on the inside of the GL Water Mechanical DI device to verify the correct fitting position... -
Page 8: Activating The Device Through The Gl Activation App
Transcend IoT Activating the device through the GL Activation App... - Page 9 Transcend IoT Click the button below to access the device activation manual GL Activation Manual Go to the mobile app store for your operating system (Android or iOS) and search for the term “GL Activation,” or access it using the buttons below:...
-
Page 10: Monitoring The Gl Utilities Water Mechanical Di
Transcend IoT Monitoring the GL Utilities Water Mechanical DI... - Page 11 Transcend IoT Alarms for this device Leakage Magnetic Reverse Attack Flow Activated when a consumption Alarm activated Alarm activated when pattern with leakage when a magnetic there is reverse flow* characteristics is field is detected for at least 30 seconds detected near the device Maximum Flow...
- Page 12 +55 11 9.1162.6684 1510 Gomes de Carvalho Street suporte@grouplinkone.com 12 floor Vila Olímpia www.grouplinkone.com São Paulo • Brazil...
Need help?
Do you have a question about the GL-MDV208 and is the answer not in the manual?
Questions and answers