Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monster PixMax PME720
Summary of Contents for Monster PixMax PME720
- Page 1 PME720 Vinyl Cutter Monster - Buy Monster - Be Monster...
-
Page 2: Specification
Specification Product Description The PixMax Vinyl Cutter has a cutting width of 28 inches, allowing you to cut a variety of sign vinyl and t-shirt flex vinyl. The built in optical eye with laser guiding allows for precision cutting at a minimum of 10mm, using different speed and force settings which can be adjusted through the control panel. -
Page 3: Technical Information
34.6 inches wide full machine 13.8 inches high machine Monster Guarantee If you wish to return a product in perfect working order, we provide a 14 day returns policy as long as the item is unopened and in a resalable condition. - Page 4 Specification Product Features 1) Side pod - ON/OFF switch is positioned on left hand side 2) Control panel - adjust the settings including speed, pressure & blade position 3) LED screen - displays the parameter settings 4) Blade carriage - holds the blade and moves across the vinyl when cutting 5) Carriage belt - the carriage moves back and forward across the belt 6) Pinch rollers - hold the vinyl in place and move the vinyl during cutting 7) Grip roller - helps to move the vinyl during cutting...
-
Page 5: Control Panel
Specification Control Panel Reset – Return the carriage to the default position Option – Allows the blade to be moved into the required starting position Setup – Opens the Setup menu for adjusting Baud and eSpeed Move – Performs a test cut Origin –... -
Page 6: Blade Components
Set-up Guide Blade Components When you receive the vinyl cutter the blade holder will be assembled as shown. The blades are provided separately in a pack of 3. Blade release - press this to push the blade out of the blade holder for safe removal Silver nut - this can be twisted to adjust the length of the blade Brass nut - this locks the blade in position so that it cannot be... -
Page 7: Blade Installation
Set-up Guide Blade Installation 1) Insert the blade with the tapered end up into the blade holder. 2) Loosen the brass nut so that the blade height can be adjusted. Using the silver nut, adjust the height of the blade until it protrudes approximately 2mm from the bottom of the blade holder or until the 45 degree angle of the blade is showing. -
Page 8: Blade Replacement
Set-up Guide Blade Replacement After periodical use the blade may become blunt, especially when continually cutting thick vinyl, follow these instructions to replace the blade. 1) Turn the machine off at the power supply and unplug the power cable, then remove any vinyl from the rollers. 2) Locate the blade carriage on the vinyl cutter and open the clasp that keeps the blade holder in place. -
Page 9: Stand Components
Set-up Guide Stand Components Small screws x 6 Large screws x 10 Black plastic screw cases x 6 Black plastic screw caps x 6 Bolts with threaded bolt caps x 6 1) Base plates with wheels x 2 2) Roller supports x 2 3) Vinyl roller bars x 2 4) Side stands x 2 5) PixMax support plate x 1... -
Page 10: Stand Assembly
Set-up Guide Stand Assembly 1) Attach the PixMax support plate to the side stands using 4 small screws, 4 plastic screw cases and 4 plastic screw caps. Face the flat sides of the stands inwards, ensuring that the top plate (where the cutter will rest) is at the top. -
Page 11: Computer Connection
Installation Guide Computer Connection To begin installation, connect the vinyl cutter via USB or Serial cable to your desktop computer or laptop. Only one cable needs to be connected, not both USB and Serial cables. Ensure that the cable is connected at both ends, the vinyl cutter does not have to be switched on at this point. - Page 12 Installation Guide Computer Connection “OK” to continue. 5) The driver will now be installed and the “Completed the found new hardware wizard” box will appear. Click “OK” to continue. To check that the device has been correctly installed go to “Control Panel” and look for “Device Manager”, sometimes located under “Hardware”.
- Page 13 Installation Guide Computer Connection These instructions are for use with the SignCut Pro cutting software which is supplied with most of our vinyl cutting bundles, these instructions may vary if you are using a different software. You will need a cutting software to be able to transfer your design from a computer to the cutting machine, contact the manufacturer of the software for support connecting your cutter.
- Page 14 For the PixMax 720 Vinyl Cutter the manufacturer name needs to be set as “JINKA, GOLDCUT” or “Monster Doodles”, the cutter number should be set as “JINKA JK721” or “JINKA JK720” or simply “720”. The output device / port needs to be the same COM number that you made a note of when installing the drivers for the vinyl cutter.
- Page 15 User Guide Force & Speed Settings When the vinyl cutter is switched on, a red indicator light will show on the Reset button to indicate there is power to the machine. The default menu showing the speed and force settings will show on the screen, here you can adjust the speed and force settings as shown below.
- Page 16 User Guide Position & Origin Settings To access the position menu press the “Option” button. The screen will show the position of the blade on the x and y axis. The arrow keys can then be used to position the blade where required. Once the blade is in the necessary starting position the new origin can be confirmed by pressing the “Origin”...
- Page 17 User Guide Operation Instructions 1) Install the drivers and connect the vinyl cutter to your computer. 2) Install cutting software such as SignCut Pro, that we provide with many of our vinyl cutter bundles. 3) Prepare your logo or sign in a design software such as Inkscape, CorellDraw or Illustrator.
- Page 18 User Guide Operation Instructions With the cutter switched on and the vinyl threaded through the cutter, use the “Option” button to access the position menu and then the up and down arrow keys to move the vinyl back and forth through the machine. As you do this watch the edges of the vinyl as they run past the ruler guide, the vinyl should remain at the same measurement whilst you move it back and forth.
- Page 19 User Guide Recommendations Speed settings - higher speeds can be used for cutting simple shapes and logos quickly, whereas we advise that lower speed settings should be used for intricate designs or small letters. Attempting to cut complicated images at high speeds can cause unwanted scratches or damage to the vinyl, our cutter has a minimum cutting size of 10mm so bare this in mind when preparing your design.
- Page 20 User Guide Recommendations At Monster Group we stock both T-shirt and sign vinyl in a variety of bundles, giving you choices on colour and price. Garment Flex Vinyl is our standard vinyl for pressing on to T-shirts, hoodies, bags, caps - any material made from polyester, cotton or poly-cotton. At 80 microns (0.08mm) thick, this vinyl would require a cutting pressure of approximately 50g.
- Page 21 User Guide eSpeed & Baud Settings These settings regulate the speed at which the information is being sent from the computer to the vinyl cutter. The default settings will calibrate with your chosen software and must be the same on both the software and vinyl cutter to work.
-
Page 22: Troubleshooting
Troubleshooting Resolution Guide Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions. For computer installation problems see the “Installation Guide” section. Q: When I cut my design the blade leaves unwanted faint lines across the surface of the vinyl. -
Page 23: Safety Advice
Safety Advice Safe Working Practice Please read through the safe working practice to ensure prevention of injury or damage to the device. Do not operate the device in areas of high temperature or humidity as the machine may not function correctly. Do not use the machine if the adaptor wire is frayed or damaged. -
Page 24: Sales Department
Address To visit our office Monster House and view our products, send postal corre- spondence or return items our address is provided below. Monster House, Alan Farnaby Way, Sheriff Hutton Industrial Estate, Sheriff Hutton, York YO60 6PG... - Page 25 We supply a diverse range of products which offer exceptional value for money. We strive to provide the best possible customer experience with free UK delivery across all our products and a Monster Guarantee for 100% satisfaction. Our dedicated customer service team will be more than happy to help with any questions you may have.
Need help?
Do you have a question about the PixMax PME720 and is the answer not in the manual?
Questions and answers