Rosco Vision Safe-T-Scope 360AHD User Manual

3d surround view system

Hide thumbs Also See for Vision Safe-T-Scope 360AHD:

Quick start manual (11 pages)

Table Of Contents

Quick Links

Download this manual

Safe-T-Scope® 360AHD™ 3D Surround View System

User Manual

November 12, 2024

90-21 144

Place, Jamaica, New York USA 11435

Phone: 800-227-2095

www.roscovision.com

Version 1.2

User Manual Part Number: MNL360AHD (V1.1)

Specifications and details are subject to change without prior notice.

Patent Pending

Table of Contents

Need help?

Do you have a question about the Vision Safe-T-Scope 360AHD and is the answer not in the manual?

Questions and answers

Summary of Contents for Rosco Vision Safe-T-Scope 360AHD

Page 1 November 12, 2024 90-21 144 Place, Jamaica, New York USA 11435 Phone: 800-227-2095 www.roscovision.com Version 1.2 User Manual Part Number: MNL360AHD (V1.1) ©2024 Rosco® Vision, All Rights Reserved Specifications and details are subject to change without prior notice. Patent Pending...
Page 2: Table Of Contents
7.3.4 View Adjust …………………………………………………………………….16 7.4 AVM (Around View Monitor) Interface..…………………………………..18 7.4.1 Automatic Calibration…………………………………………………….19 7.4.2 Calibration File ………………………………………………………………20 7.4.3 Vehicle Type ………………………………………………………………….21 7.4.4 Surround View……………………………………………………………….22 7.4.5 Parking Lines …………………………………………………………………22 7.4.6 3D Perspective ……………………………………………………………...23 7.4.7 3D Display Adjust ………………………………………………………….24 ©2024 Rosco® Vision...
Page 4: Precautions
Remove the power cable connections when you do not intend to use the unit. 1) Do not open the ECU case unless directed by Rosco 2) Driver must exercise caution when viewing the monitor during vehicle operation ©2024 Rosco®...
Page 5 3) Never use strong solvents such as thinner or benzine, as they might damage the finish of the camera housing. CAUTION: You are cautioned that any changes or modifications not expressly approved in this manual and by Rosco personnel could void your warranty and risks potential damage to the device ©2024 Rosco® Vision...
Page 6: Product Features
4) Provides FHD 1080P video output and multiple video signal output formats. 2.2 Useful Applications 1) Reverse Parking: Simplifies backing into tight spaces. 2) Side Parking: Assists with parallel parking maneuvers. 3) Tight Space Navigation: Guides you through confined roadways. ©2024 Rosco® Vision...
Page 7: Features
Reversing Image: Automatically triggers to the rear view when the reverse wire is activated. Side Images: Automatically triggers to the left or right view when the corresponding wire is activated. 4) Automatic Plane Correction: Ensures images are correctly aligned and free of distortion. ©2024 Rosco® Vision...
Page 8: Parts List
3. Parts List STSK360AHD – 360 AHD Surround View Kit Item Description Rosco Part No. Quantity ECU (Electronic Controls Unit) STSK360AHDECU AHD Fish-eye Camera STSC360AHD Power Harness STSK360AHDPHAR 34-button remote control STSA5785 Infrared extension cable STSA1040 Video Input Harness STSK360AHDARA...
Page 9: Technical Specifications
+10% RH – +95% RH Relative Humidity 4.2 Camera Parameters Input Voltage 12Vdc -20°C – +70°C Operating Temperature -40°C – +85°C Storage Temperature Video Output Resolution 1080P @ 30FPS Horizontal FOV (Field of View) >170° Waterproof Rating IP69K Environmental Rating ROHS ©2024 Rosco® Vision...
Page 11: Remote Control Instructions
Number buttons (0-9): Input numbers in the input box or switch views in the main interface. • CLEAR: Delete a character each time. • MULTI: Switch to full-screen surround view in the main interface. • PTZ: Enter a decimal point. ©2024 Rosco® Vision...
Page 12: Main Interface
The default password for this system is: 22061. After the password is logged in, there is no need to re-enter the password within 10 minutes; once the timeout or restart of the device or wake up from sleep, the password ©2024 Rosco® Vision...
Page 13: Main Menu Interface
3) Information: Display system information and perform software updates. 7.3 User Setup -update with removed time Feature Description: 1) Basic Setup: Interface for basic setup configurations. 2) Display: Interface for display options. 3) Trigger: Interface for setting triggers 4) View Adjust: Corrections ©2024 Rosco® Vision...
Page 14: Basic Setup
3 seconds of inactivity. When set to OFF, the system remains on. The Define option allows customization of the standby time between 3-30 seconds. Language: The language setting is set to English by default. Select between English, French, and Spanish language options. ©2024 Rosco® Vision...
Page 15: Display
4) View Mode: Toggle between 2D mode and 3D mode for video display. 2D mode will show an areal 2D model of the vehicle, along with 2D surround view, while 3D mode ©2024 Rosco® Vision...
Page 16 11) Default View: Choose the default display view. Configurations are as follows: FRONT, REAR, SIDE, FRONT ZOOM, REAR ZOOM, FRONT LEFT, FRONT RIGHT, REAR LEFT, REAR RIGHT, LEFT, RIGHT, 3D LEFT*, 3D RIGHT*, 3D FORWARD FACING*, 3D REAR FACING* *Views are only available using 3D mode ©2024 Rosco® Vision...
Page 17: View Adjust
5) Emergency: Configure the default view for Emergency trigger. This feature is only available if both left and right trigger are wired for emergency situations and can be triggered in the same time i.e Hazard lights. 7.3.4 View Adjust ©2024 Rosco® Vision...
Page 18 1) Fish Eye Rectify: The fish eye correction switch is OFF by default, resulting in a fish- eye image from the selected camera. When turned ON, the selected camera image will be corrected to a non-fish-eye state. ©2024 Rosco® Vision...
Page 19: Avm (Around View Monitor) Interface
8) View: When set to ON, the image will display a mirrored view. When set to OFF, the image will display an unmirrored view. 7.4 AVM (Around View Monitor) Interface The image above shows the AVM interface in 2D mode ©2024 Rosco® Vision...
Page 20: Automatic Calibration
4) Surround View: Configure surround view settings. 5) Parking Line: Configure parking line display settings. Feature Description [3D mode only] 6) 3D Perspective: Configure 3D perspective settings. 7) 3D Display Adjust: Adjust 3D user display settings. 7.4.1 Automatic Calibration ©2024 Rosco® Vision...
Page 21 Feature Description: 1) File/Mode/Size/Type: These are parameters used to configure the calibration steps. At this moment, Rosco does not support modified calibration. Please leave settings as it is. If unsure, please perform reset of the system to obtain default values.
Page 22: Calibration File
Notice: 1) Files can only be imported from a USB drive. Ensure the USB drive is accessed before entering this page. 2) It is normal for the system to restart after confirming the import of calibration files. ©2024 Rosco® Vision...
Page 23: Vehicle Type
7.4.3 Vehicle Type Feature Description: 1) Vehicle Type List: Select from a list of vehicles available to choose from the drop-down menu. Please contact Rosco for customization of vehicle types. ©2024 Rosco® Vision...
Page 24: Parking Lines
1) Channel: Select the camera channel to be configured. Default is set to Back camera. 2) Move: Move the 2D parking lines along the display output in the X-Y axis. 3) Width Scale: Configure the Width Scale to adjust the width between the parking lines. ©2024 Rosco® Vision...
Page 25: Perspective
Speed 3D-Rotate: 3D vehicle model rotation speed, default value is 1 (range: 0.5-2). Precision: Precision setting, default value is 0.01 (range: 0.01-0.1). Camera Z-Position: 3D view zoom setting, default value is -3.000. Camera Y-Position: 3D view up/down rotation setting, default value is -0.850. ©2024 Rosco® Vision...
Page 26: Display Adjust
2) New Method: Toggle On/Off to implement new method of 3D display adjust 3) Vehicle Floor Region: Adjust the floor level of the display vehicle which is displayed on the output 4) Plane Radius: Adjust the radius of 3D plane view. Increase the value to cover a wider radius. ©2024 Rosco® Vision...
Page 27 Note: User must only upgrade the system software when an official software version release is uploaded to the Rosco website and/or when directed by a Rosco personnel. 2) System Setup: Used to perform a factory reset of the system, as well as import and export setups and settings saved on the device.

This manual is also suitable for:

Stsk360ahd