Page 1
PSB511 Series EIO118 ® ® Intel Xeon Silver 4210/4214 Full-size LTE Cat.4 mini card with Processors Socket FCLGA3647 ® PICMG v1.3 Full-size CPU Card GNSS module. User’s Manual User’s Manual...
Page 2
Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.
Safety Instruction By following the safety guidelines below, you can ensure your personal safety and help protect the product and work environment from potential damage. Road safety first! When you drive, do not use the hand held devices even if it has a hand-free feature.
Reference Standards This design of the product complies with the following standards: 3GPP TS 51.010-1 V10.5.0: Mobile Station (MS) conformance specification; Part 1: Conformance specification 3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification; Radio transmission and reception (FDD); Part 1: Conformance specification 3GPP TS 34.122 V10.1.0: T echnical Specification Group Radio Access Network;...
EIO118-AMATT-LTE EIO118-AMVzW-LTE Features The EIO118 series is an LTE wireless communication module in a PCIe Mini Card form factor, supporting multiple network formats and bands, including LTE-TDD, LTE-FDD, TD-SCDMA, WCDMA, EVDO, CDMA, and GSM. It delivers LTE Cat 4 speeds, offering up to 150Mbps for downlink and 50Mbps for uplink, making it an ideal solution for industrial routing, security, and Internet of Vehicles (IoV) applications.
EIO118 User’s manual Specifications EIO118- EIO118-AMATT AMVzW Model Name EIO118-EAU-LTE EIO118-JP-LTE -LTE -LTE E39P118100 E39P118102 E39P118101 E39P118103 LTE FDD: Band LTE FDD: LTE FDD: Band 1/3/5/7/8/20/28 2/4/5/12/13/17/66/71 Band LTE TDD: Band 1/3/8/11/18/19/2 WCDMA: Band 2/4/5 Supported 38/40/41 1/26/28 Frequency WCDMA: Band LTE TDD: Band 1/5/8 GSM/GPRS/EDGE:...
Page 9
Indicator The mobile’s communication status is displayed Software Supports Linux and Windows AT Command 3GPP TS 27.007 and 27.005, and proprietary Fibocom AT commands Supports bulit-in AXIOMTEK commands for monitoring and control, featuring the following functions: Axiomtek Hardware reset. Control Software reset.
Page 10
EIO118 User’s manual This page is intentionally left blank. Introduction...
EIO118 User’s manual Section 2 Module and Pin Assignments Application Interface PCI express Mini Card Interface The EIO118 series MiniPCIe module adopts a PCI express Mini Card interface, with a total of 52 pins. 2.1.1 Pin Assignment Signal Name Signal Name...
EIO118 User’s manual Module VCC 3.3V DC in Module power supply Reserved Ground Reserved Reserved Reserved Reserved Reserved Reserved Ground Reserved Module VCC 3.3V DC in Module power supply Keep the unused pins floating. Note: Power Supply Table The power interfaces of NL668 series MiniPCIe module are shown in the following table: Pin Name Description The module’s power supply is 3.0V to...
EIO118 User’s manual Reset Mode Control Signal The EIO118 series MiniPCIe module provides one control signal for the reset operation. The pin definition is shown as follows: Pin Name Pin Num Description Connect this pin to the system platform reset. If the PERST# function is not used, please pull this pin high to 3.3V.
EIO118 User’s manual (U)SIM Interface EIO118 series MiniPCIe module support 2 types SIM card interface with switching function, and support1.8V and 3.0V (U)SIM card. Built-in Nano SIM Slot on the Module. ⚫ Support (U)SIM card interface on the Main Board.
EIO118 User’s manual Status Indicator The EIO118 series MiniPCIe module provides one signal to display the operating status of the module. The status indication pin is shown in the following table: Indicator Light /flash ITEM Function Description Color status Mobile Network Data link is in an established...
Page 18
EIO118 User’s manual This page is intentionally left blank. Module and Pin Assignments...
EIO118 User’s manual Section 3 Antenna Interface The EIO118 series MiniPCIe module has three antenna interfaces: the main antenna interface, the diversity antenna interface, and GNSS antenna interface. The pin definitions are as follows. RF Connector Name Description 4G/LTE Diversity antenna...
EIO118 User’s manual 3.1.2 EIO118-JP-LTE Operating Band, Transmission Power and Sensitivity EIO118-JP-LTE Operating Band Operating Band Description Tx (MHz) RxMHz) Band 1 LTE FDD/WCDMA 1920-1980 2110-2170 Band 3 LTE FDD 1710-1785 1805-1880 Band 6 WCDMA 832.4-837.6 877.4-882.6 Band 8 LTE FDD/WCDMA 880-915 925-960 Band 11...
Page 23
EIO118 User’s manual EIO118-JP-LTE Sensitivity Sensitivity(dBm) Sensitivity(dBm) Mode Band Note PRX Typ. DRX Typ. Band 1 -110.5 -110.5 Band 6 -111.0 -110.5 WCDMA Band 8 -110.5 -110.5 Band 19 -111.0 -110.5 10MHz Bandwidth, Band 1 -98.5 -99.5 50RB 10MHz Bandwidth, Band 3 -98.5 -98.5...
EIO118 User’s manual 3.1.3 EIO118-AMATT-LTE & EIO118-AMVzW-LTE Operating Band, Transmission Power and Sensitivity EIO118-AMATT-LTE & EIO118-AMVzW-LTE Operating Band Operating Band Description Tx (MHz) Rx(MHz) Band 2 LTE FDD/WCDMA 1850- 1910 1930 - 1990 Band 4 LTE FDD/WCDMA 1710-1755 2110-2155 Band 5 LTE FDD/WCDMA 824 - 849 869 - 894...
Page 25
EIO118 User’s manual EIO118-AMATT-LTE & EIO118-AMVzW-LTE Sensitivity Sensitivity(dBm) Sensitivity(dBm) Mode Band Note PRX Typ. DRX Typ. Band 2 -109 BER<0.1% WCDMA Band 4 -109.5 BER<0.1% Band 5 -111 BER<0.1% Band 2 -97.8 -98.5 10MHz Band width Band 4 -97.8 10MHz Band width Band 5 -99.5 10MHz Band width...
EIO118 User’s manual GNSS Receiver The EIO118 series MiniPCIe module supports GNSS functionality and the NMEA-0183 protocol. The specifications are as follows: EIO118 series MiniPCIe module GNSS Specifications Typ. Note Description Condition Frequency L1 Band 1559~1609 MHz 62mA GNSS fixing...
EIO118 User’s manual Antenna Design Requirements EIO118 series MiniPCIe module Antenna Design Requirements Description Condition Type Note Frequency 698~2700MHz VSWR Recommended ≤ 2:1 Recommended <-10dB Gain Recommended ≤ 2.5dBi Efficiency Recommended > 40% (-4dB) GSM/UMTS/LTE > 33dBm (2 W) peak power Max input power >...
Page 28
It is recommended to use a passive GNSS antenna for the EIO118 series MiniPCIe ⚫ module when LTE B13 or B14 is supported, as the use of an active antenna may generate harmonics that affect GNSS performance.
EIO118 User’s manual Antenna RF Connector The EIO118 series MiniPCIe module provides three RF connectors. It is recommended that the application uses a matching RF adapter cable. MAIN is the RF main antenna interface, DIV is the diversity antenna interface, and GNSS is the GNSS antenna interface.
EIO118 User’s manual Section 5 EIO118 MCU Commands List The EIO118 has a built-in MCU and can monitor the module’s internal operating status and provide simple control through the UART interface. EIO118 MCU Control Interface The control function uses the UART port on the MCU. The UART port PID number is 08FC, and the VID number is 118B.
EIO118 User’s manual EIO118 MCU Commands List The MCU has built-in watchdog and power sequence management functions on the module. Please refer to the MCU-supported command list; Item Description Command Response from EIO118 MCU >OK > 1. HRST > 2. SIM_MB >...
Page 35
EIO118 User’s manual Immediate DATA >MCU FW VER = 24042302 >Module Health = Good >SIM slot use main board side >Real time Temperature = ***C >Voltage = ***mV >Current = ***mA >Power = ***W >Max Voltage = ***mV >Min Voltage = ***mV >Max Current = ***mA ===================================== ========...
Page 36
EIO118 User’s manual debug >Debug message is turn off message output >Finish >OK CMD_MCU_ Reset MCU >! MCU will reset now >Finish EIO118 MCU Commands List...
Need help?
Do you have a question about the EIO118 Series and is the answer not in the manual?
Questions and answers