Page 1
LED TV UH85** UH95** UH65** (M4 X L12) (M4 X L20) UH85**, 55/65UH95**, 86UH95** UH65** (M5 X L12) : Depending on model / Selon le modèle / Dependendo do modelo / P/No: MFL69381802 (1603-REV03) www.lg.com Printed in Korea...
OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69340902* P/NO : MFL69340902 (1607-REV04) Printed in Korea...
Page 14
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.) ATTENTION: This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and practices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
Safety instructions Please read these safety precautions carefully before using the product. Insert power cable plug completely into wall socket otherwise if not WARNING secured completely into socket, re ignition may break out. Ensure the power cord does not come into contact with hot objects Do not place the TV and/or remote control in the following such as a heater.
Page 16
Keep the anti-moisture packing material or vinyl packing out of the Do not spray water on the product or scrub with an in ammable reach of children. Anti-moisture material is harmful if swallowed. If substance (thinner or benzene). Fire or electric shock accident can swallowed by mistake, force the patient to vomit and visit the nearest occur.
Page 17
Only use an authorized AC adapter and power cord approved by mounting interface (optional parts) to the back of the product. When LG Electronics. Otherwise, this may result in re, electric shock, you install the set to use the wall mounting bracket (optional parts), x malfunction or product deformation.
Page 18
Only use the speci ed type of battery. This could cause damage to the Please follow the installation instructions below to prevent the product remote control. from overheating. • The distance between the product and the wall should be more than 10 cm.
Page 19
Avoid touching the screen or holding your nger(s) against it for long If the product feels cold to the touch, there may be a small “ icker” periods of time. Doing so may produce some temporary or permanent when it is turned on. This is normal, there is nothing wrong with distortion/damage to screen.
In this case, stop watching the 3D video and take a rest. 10 cm (+ / -2 cm) • Only use LG 3D glasses. Otherwise, you may not be able to view 3D • Antenna Isolator Installation Guide (Depending on model) videos properly.
AG-F***DP AN-TD700 buttons. Dual Play Glasses LG Twin TV Engine CAUTION • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not move the TV by holding the cable holders, as the cable...
Adjusting the menu Using the buttons When the TV is turned on, press the button one time. You can adjust (Depending on model) the Menu items pressing or moving the buttons. You can simply operate the TV functions, pressing or moving the button. Turns the power o .
LG recommends that wall mounting be performed by a quali ed professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the...
Connections (noti cations) Provided item Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external Adhesive label devices.
CI module connection Remote control (Depending on model) View the encrypted (pay) services in digital TV mode. (Depending on model) • Check if the CI module is inserted into the PCMCIA card slot in the The descriptions in this manual are based on the buttons on the remote right direction.
Number buttons Enters numbers. By Pressing AD button, audio descriptions function will be enabled. (Depending on model) Shows programme guide. Starts to record and displays record menu. (Only Time Returns to the previously viewed programme. Machine ready supported model) Adjusts the volume level. Returns to LIVE TV.
Wheel (OK) Press the center of the Wheel button to select a (POWER) Turns the TV on or o . menu. You can change programmes by using the wheel button. (STB POWER) You can turn your set-top box on or o by Navigation buttons (up/down/left/right) adding the set-top box to the universal remote control for your TV.
15 minutes of inactivity. When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is LG Electronics will also provide open source code to you on CD-ROM displayed. for a charge covering the cost of performing such distribution (such • ...
Page 29
• The energy information provided with the product is indicated in (Only UH63**, UH65**, UH75**, UH77**, UH85**, UH95**) accordance with the regulations of each country. (Depending on Wireless module (LGSBWAC61) Specifications country) - The Energy consumption is measured in accordance with IEC Wireless LAN (IEEE 802.11a/b/g/n/ac) 62087.
Page 30
Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • ...
Page 31
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315- 9999 / 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
Page 32
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • • Baud rate : 9600 bps (UART) Stop bit : 1 bit • • Data length : 8 bits Communication code : ASCII code • • Parity : None Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 39
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 40
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 41
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 42
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 43
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 44
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...
Need help?
Do you have a question about the 65UH95 Series and is the answer not in the manual?
Questions and answers