Chipset - Asus T3-P5G31A User Manual

5.4.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Setting
WARNING: Setting wrong values in below
sections may cause system to malfunction.
NorthBridge Configuration
Southbridge Configuration
North Bridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
Initiate Graphic Adapter
Internal Graphics Mode Select
PEG Port Configuration
PEG Force x1
Video Function Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the Interanal graphics
device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Forec x 1.
Configuration options: [Enabled] [Disabled]
ASUS T-P5G31A
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[Disabled]
Memory Options &
Information
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
5-21