Hard Disk Drives; Boot Settings Configuration - Asus P6-P7H55E User Manual

4.6.2

Hard Disk Drives

Hard Disk Drives
1st Drive
2nd Drive
1st /2nd Drive [USB: JetFlash Trans]
These items specify the boot sequence from the available devices. The number
of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [USB: JetFlash Trans] [USB: Kingston DataT]
4.6.3 Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
4-24
[USB: JetFlash Trans]
[USB: Kingston DataT]
[Enabled]
[Enabled
[Force BIOS]
[On]
[Enabled]
[Enabled]
Specifies the boot
sequence from the
available devices.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup