Table of Contents
Advertisement
4.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
•
Press <Alt> + <F2> during POST.
•
Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and
press <Enter> to enable it.
2.
Press <Tab> to switch between drives until the correct BIOS file is found,
then press <Enter>. EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
•
•
4-4
ASUSTek EZ Flash 2 BIOS ROM Utility V3.36
MXIC 25L8005
Current ROM
P6-P7H55E
0206
(H:00 B:03)
03/14/2009
A:\
[Enter] Select or Load
[Up/Down/Home/End] Move
This function supports USB flash disks with FAT 32/16 format and single
partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Tab] Switch
[V] Drive Info
[B] Backup
[Esc] Exit
Chapter 4: BIOS setup
Hide quick links:
Advertisement
Table of Contents
