Using The Usb Storage Device (Usb Restore) - Asus ET2011AUTB User Manual

Using the USB storage device (USB Restore)

When the Recovery Partition in your system is crashed, use the USB storage device to restore
the system to the factory default partition or the factory environment data to the entire hard
disk.
1. Disable Boot Booster in BIOS setup.
2. Connect the USB storage device that you back up the factory environment data to.
3. Press <ESC> on bootup and the Please select boot device screen appears. Select USB:
XXXXXX to boot from the connected USB storage device.
4. Select the language and click Next.
Select Restore and click Next.
5.
Select a task and click Next. Task options:
6.
Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the factory default partition. This
option deletes all data on the system partition "C" and keeps the partition "D" unchanged.
After you click Next, the factory default partition will be displayed. Click Next again.
Restore the Whole Hard Disk
Select this option if you want to restore your All-in-one PC to the factory default state. This
option deletes all data from your hard disk and creates a new system partition as drive "C" ,
an empty partition as drive "D" and a Recovery Partition.
7. Data on the factory default partition or on the whole hard disk will be cleared depending
on the option you selected in the previous step. Click Restore to start the task.
8. When the restore is completed successfully, click Reboot to restart the system.
All-in-one PC ET2011 Series 41