Acer D626D+ User Manual page 9

Cleaning the lens
•
Before cleaning the lens, be sure to turn off the projector and unplug the
power cord to allow the projector to cool down for at least 30 minutes.
•
Use a compressed air tank to remove the dust.
•
Use a special cloth for cleaning lens and gently wipe the lens. Do not touch
the lens with your fingers.
•
Do not use alkaline/acid detergents or volatile solvents such as alcohol for
cleaning lens. If the lens is damaged due to the cleaning process, it is not
covered by the warranty.
Warning:
•
Do not use a spray containing flammable gases to remove dust or dirt from the lens.
This may cause a fire due to excessive heat inside the projector.
•
Do not clean the lens if the projector is warming up as this may cause the lens' surface
film to peel off.
•
Do not wipe or tap the lens with a hard object.
Spec label location
•
Spec label location are placed the following locations:
DLP Projector , EMEA
Model NO ( ): DSV1844
Marketing NO:X1128H
Input ( ):
AC 100-240V~ ,50/60Hz,3.1A
Mfg.Date: 2017.07.23
EU importer: Acer Italy s.r.l
SNID: 63900000259 Viale delle Industrie 1/A, 20044 Arese (MI), Italy
Acer UK Ltd
Heathrow Boulevard III,282 Bath Road
West Drayton,Greater London,UB7 0DQ
MRJTG11001639000025930
SERIAL NO ( ):
Manufacturer: Acer Inc. 8F. 88, Sec.1 Xintai 5th Rd., New Taipei City
ix
Warning
Avertissement
Lamp(s) Contain Mercury,
Dispose Properly
Made in China