CAMAR ICONICA Use And Maintenance Manual

Coffee pod machine

Advertisement

Quick Links

USE AND MAINTENANCE MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICONICA and is the answer not in the manual?

Questions and answers

Summary of Contents for CAMAR ICONICA

  • Page 1 USE AND MAINTENANCE MANUAL...
  • Page 2: Ce Declaration Of Conformity

    Declares that the machine MACCHINA PER CAFFÈ ESPRESSO ICONICA 2023 _____________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________ Machine Model Construction year The ICONICA espresso coffee machine is intended for the preparation of drinks using paper coffee pods. The machine is intended for domestic use only.
  • Page 3 CE Declaration of Conformity Directive 2006/42/EC of the European Main references harmonized standards Parliament and of the Council of 17 May EN12100:2010 Safety of machinery - 2006 on machinery, and amending General principles for design - Risk Directive 95/16/EC. assessment and risk reduction EN Directive 2014/35/EU of the European 60335-1:2012 Household and similar Parliament and of the Council of 26...
  • Page 4: Table Of Contents

    Summary __________________________________________________________ __________________________________________________________ 5. Maintenance 1. General information 1.1. Symbols to know 5.1 Cleaning the pod holder 1.2. Identification of the manufacturer 5.2 Cleaning the drain drawer 1.3. Machine marking 5.3 Decalcification __________________________________________________________ __________________________________________________________ 2. Security 6. Warranty 2.1 General warnings 6.1 The parties 2.2 Vibrations and noise emissions 6.2 Warranty information...
  • Page 5: General Information

    General information...
  • Page 6: Symbols To Know

    1.1 Symbols to know Attention Electrical hazard This symbol indicates the presence This symbol indicates the presence of of danger for the user or damage to danger linked to the presence of the product. Always follow electricity. Pay particular attention instructions when this symbol is when this symbol is present.
  • Page 7: Identification Of The Manufacturer

    1.2 Identification of the manufacturer CAMAR s.r.l.s. _____________________________________________________ Manufacturer Via Matteotti 107 81030 Frignano _____________________________________________________ (CE)Manufacturer Registered office Fig. 1 info@macchinearoma.com EAN: www.macchinearoma.com The machine model, instead, is identified by _____________________________________________________ the EAN code, a 13-digit code, present on the Contacts machine box.
  • Page 8 Be sure to keep it. An example is shown in Fig. 3 Fig. 4 Fig. 3 The serial number and CE marking are located inside the water tank compartment in all ICONICA models. Fig. 4...
  • Page 9 Safety...
  • Page 10: General Warnings

    2.1 General warnings _____________________________________________________ This manual has been created to provide the information that the heating user with a general knowledge of the element is subject to residual machine and to allow its use in safe heat after use. conditions. This Manual is an integral part of _____________________________________________________ the machine and is intended to provide all the information necessary for: handling the...
  • Page 11: Vibrations And Noise Emissions

    The updated version is always available and 2.2 Vibrations and noise downloadable from our website emissions www.macchinearoma.com _____________________________________________________ Before putting the machine into Under conditions of use in accordance with the operation, carefully read the instructions for correct use, the vibrations and instructions contained in this noise emissions produced by the machine are Manual and carefully follow the...
  • Page 12: Intended Use

    • in an environment with hygienic characteristics unsuitable for food production. The ICONICA espresso machine is intended for the preparation of drinks using espresso coffee pods. The machine is intended for This appliance can be used by children aged from 8 domestic use only.
  • Page 13: Residual Risks

    Keep the appliance and its cord out of reach of children under 8 years of age; Children shall not play with the appliance; The appliance is not intended for use by persons (including children) with reduced physical, mental or mental capabilities. The manufacturer cannot be held responsible for any commercial and/or image damage, nor for damage to property or persons caused by...
  • Page 14: Machine Description

    Machine description...
  • Page 15: Description Of The Machine

    3. Description of the machine 1 Main switch 2 Coffee dispensing switch 3 Water tank 4 Waffle press 5 Closing lever 6 Filter holder and dispensing spout 7 Drain drawer STANDARD GROUP HEIGHT: 35 cm WIDTH: 19 cm DEPTH: 35 cm WEIGHT: 10 Kg CAPACITY: 2 liter...
  • Page 16: Installation And Use

    Installation and use...
  • Page 17 Check the technical characteristics on the make sure it is intact. CE marking, located inside the water tank compartment in all ICONICA models, as 2) Test the machine on a smooth surface, highlighted in paragraph 1.3 so that all four feet adhere well to the surface.
  • Page 18: Coffee Dispensing

    _____________________________________________________ Fig. 2 Do not operate the machine without water: make sure there is enough water in the tank and that the hose is immersed in water. _____________________________________________________ Fig. 3 4) Insert the power cord. Check that the mains voltage corresponds to that of the appliance.
  • Page 19: Adjustments

    10) Press the switch again to stop dispensing. _____________________________________________________ It is recommended to remove the used pod immediately after dispensing, to avoid unpleasant odors due to a used pod left inserted for a long time and/or losing the seal. To do this, lift the closing lever and remove the used Fig.
  • Page 20: Optional Stand-By

    4.3 Optional Stand-by Turning on the appliance: Press the T1 or T2 button or T1 and T2 at the same time to turn the device on. Press T1 and T2 at the same time for 2 seconds to turn the device off.
  • Page 21 Stand-by Reprogramming: The new duration is only stored if it is greater than 10 seconds. The user can reprogram the duration or volume of short or long coffee dispensing as desired with Auto OFF function: the following operating mode (example: reprogramming short coffee): After 9/15 minutes from the last dispensing, Start dispensing by pressing and holding the...
  • Page 22: Standard Packaging And Transportation

    _____________________________________________________ In case of inactivity, the machine must be Do not touch the pod presser stored adopting the following precautions: while the machine is on, it is a hot part, so there is a risk of Turn off the machine and disconnect the power burns.
  • Page 23: Maintenance

    Maintenance...
  • Page 24: Cleaning The Pod Holder

    5. Maintenance To assemble the pod holder: - Screw the filter onto the pod holder; - Place the filter holder in its housing; - Rotate Before carrying out any type of cleaning, to the left. it is necessary to isolate the machine from the electrical power supply and wait for it to cool down.
  • Page 25: Cleaning The Drain Drawer

    5.2 Cleaning the Why use the CLEANER Aroma: a) It is the only certificate for contact with food; drain drawer b) It is based on melic and citric acid, therefore based on natural acids; Lift the drip tray and wash it. Remove the c) It is gentle on surfaces and does not corrode top grill and wash it under fresh running them, keeping mechanical parts intact;...
  • Page 26: Warranty

    Warranty...
  • Page 27: The Parties

    Seller. Possession of this THE MANUFACTURER: CAMAR s.r.l.s. document, together with the Serial Number on owner of the brand and manufacturer of the the machine itself, are necessary conditions to machine.
  • Page 28: Assistance Procedures

    The legal guarantee is the responsibility of the buttons, filter holder, etc.); Seller, and lasts 24 months. If you have problems with your ICONICA, contact your trusted Seller. ______________________________________________________________ If your Seller is not available, let us know and take...
  • Page 29: Problems With Transport - Procedure

    6.4 Problems with a) If possible, the document signed with “Reservation of control”; transport - procedure b) Photos and/or videos produced; c) Exact number of damaged packages or Any defects evidently and visibly present at boxes. the time of delivery of the product (aesthetic defects on visible parts, breakages, dents, Once the email has been received, our malfunctions, missing parts, etc.) must be...
  • Page 30: Disposal

    Disposal...
  • Page 31 In compliance with WEEE Directive 2012/19EU: The user must therefore ICONICA products are compatible with EC deliver the equipment at regulation 1935/2004. the end of its life to suitable separate collection centres for...

Table of Contents