Download
Share
Print this page
  1. Manuals
  2. Brands
  3. United Technologies Manuals
  4. Control Panel
  5. interlogix Advisor Advanced ATS 000A Series
  6. Installation and programming manual

United Technologies interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
Advisor Advanced
ATSx000A(-IP) Installation
and Programming Manual
P/N 1068970 (EN) • REV H • ISS 28AUG15

Advertisement

loading
Need help?

Need help?

Do you have a question about the interlogix Advisor Advanced ATS 000A Series and is the answer not in the manual?

Questions and answers

Related Manuals for United Technologies interlogix Advisor Advanced ATS 000A Series

Summary of Contents for United Technologies interlogix Advisor Advanced ATS 000A Series

  • Page 1 All manuals and user guides at all-guides.com Advisor Advanced ATSx000A(-IP) Installation and Programming Manual P/N 1068970 (EN) • REV H • ISS 28AUG15...
  • Page 2 All manuals and user guides at all-guides.com Copyright © 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Trademarks and Interlogix, Advisor Advanced ATSx000A(-IP) name and logo are patents trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.
  • Page 3 All manuals and user guides at all-guides.com Content Preface vi Typographical conventions vi Important note vi General installation information 1 Advisor Advanced housings 1 Advisor Advanced layout 4 Keypads and readers 5 Maintenance 8 Mains power connection 8 Battery replacement 8 Mounting 10 General installation guidelines 10 Earthing 12...
  • Page 4 All manuals and user guides at all-guides.com Test menus 34 The Advisor Advanced menu 35 How the menu sections are organized in this manual 35 Option availability 36 How to program the options 37 Accessing the installer programming menu 37 What the LCD display tells you 38 Editing the options 38 Confirmation of changes 40...
  • Page 5 All manuals and user guides at all-guides.com Zones, fobs, and cameras 94 Zones 95 Zone options 95 Adding a wireless sensor 95 Shock sensor options 104 Wireless sensor options 104 Copying zones 106 Fobs 108 Fob options 108 Cameras 110 Areas 113 Area options 113 Filters, outputs, and triggers 116...
  • Page 6 All manuals and user guides at all-guides.com Zones 152 Part set options 153 Panel and AB options 154 Other options 158 Library 161 Communications 162 Central stations 163 Common options 163 PSTN and ISDN specific options 168 IP and GSM/GPRS specific options 168 Photo transmission specific options 170 GSM/phone specific options 170 Events 172...
  • Page 7 All manuals and user guides at all-guides.com Programming Advisor Advanced via configuration software 209 Upgrading Advisor Advanced firmware 210 Installing AAFlash on the PC 210 Connecting Advisor Advanced to the PC 210 Archiving current firmware and settings 211 Upgrading Advisor Advanced firmware 211 Troubleshooting 212 Recovery procedure 212 Advisor Advanced control panel 212...
  • Page 8 All manuals and user guides at all-guides.com Preface This document includes an overview of the product and detailed instructions explaining how to install your Advisor Advanced system and program it. To use this document effectively, you should have the following minimum qualifications: •...
  • Page 9 All manuals and user guides at all-guides.com Model Enclosure Dimensions (mm) Weight (kg) ATS2000A-MM Metal 315 x 388 x 85 ATS2000A-IP-MM Metal 315 x 388 x 85 Notes • Not all variants may be available. • Weight does not include batteries. Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 10 All manuals and user guides at all-guides.com viii Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 11 All manuals and user guides at all-guides.com General installation information Advisor Advanced housings The housings with mounting holes (items 1) are shown in figures below. Item 2 indicates the pry-off tamper wall stub location. All dimensions are given in mm. Figure 1: Small metal housing (-SM) CON16 ( ) 1...
  • Page 12 All manuals and user guides at all-guides.com Figure 3: Large polycarbonate housing (-LP) 129.5 126.5 ( ) 1 CON16 CON12 CON13 S4 S5 S1 C S2 C S3 C BATT LC-OUTPUTS HC-OUTPUTS SIR TMP AUX POWER INPUTS ( ) 1 ( ) 1 Figure 4: Small polycarbonate housing (-SP) 128.5...
  • Page 13 All manuals and user guides at all-guides.com Figure 5: Small (-SM) housing pry-off tamper mount COM NO Figure 6: Medium(-MM) housing pry-off tamper mount COM NO Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 14 All manuals and user guides at all-guides.com Advisor Advanced layout Figure 7: Advisor Advanced ATSx000A(-IP) PCB layout ( ) 2 ( ) 3 ( ) 4 ( ) 5 ( ) 7 (1 ) 2 (13) (1 ) 4 CON12 CON13 (1 ) 5 (1 ) 6...
  • Page 15 All manuals and user guides at all-guides.com Keypads and readers Figure 8: ATS111xA keypad Figure 9: ATS1135 keypad (3) (6) (4) (10) (12) (25) (22) (13)  (14) (21) (24) (11)  .,’?! (10) (11) (12) (23) (16) (17)(15) (19) (18) (13) (14)
  • Page 16 All manuals and user guides at all-guides.com  / Down (15) Scroll down in the menus Change value Backspace Keys 1 to 9, alphanumerical data. See “Keypad layout” on page 40. (16) Alphanumeric keys (17) Menu Request entry to the menus (18) Enter Complete the step...
  • Page 17 All manuals and user guides at all-guides.com Blue LED Access granted Red LED On: area set Flashing: general alert (EN 50131) Dual LED Green on: AC mains supply on Green flashing: AC mains supply off, or unlocked while unset Red on: all areas set Red flashing: unlocked while set Yellow LED On: All zones are in normal state...
  • Page 18 All manuals and user guides at all-guides.com Maintenance The intrusion control panel is only allowed to be serviced by dedicated service personal. The screw of the housing is intended to protect the product from unintended use. For metal housing, the screw is already installed out of the box. For plastic housing, the screw, available inside housing, should be mounted before first time use.
  • Page 19 All manuals and user guides at all-guides.com 3. Disconnect the battery. Note that depending on the battery model the connec- tors may be located differently. 4. Remove the battery from the holder. In case a battery BS131 (12 V / 18 Ah) in an ATS1640 housing is used, it is required to have double insulation in place.
  • Page 20 All manuals and user guides at all-guides.com Mounting The unit is mounted with screws or bolts through the mounting holes in the rear section of the enclosure. Important: When the product is mounted to the wall, assure that at least 3 times the weight of the product can be supported.
  • Page 21 All manuals and user guides at all-guides.com - When installing permanent, fixed wiring, insert an easily accessible, dedicated bipolar circuit breaker in the power distribution network. - Never attempt to solder mains connection wires at the ends where they will be wired to the terminal connectors.
  • Page 22 All manuals and user guides at all-guides.com Earthing WARNING: The correct earthing procedures must be followed. Earthing of one cabinet containing several devices All devices designed for the system have earth connections via metal studs to the metal housing. Make sure that these metal studs make good connection to the housing (beware of paint).
  • Page 23 All manuals and user guides at all-guides.com Shielding The shielding of all shielded cables used in the system should only be connected at one side to one common earthing point in a building (see Figure 13 below). If a shielded databus cable is routed via more than one plastic device the shielding from incoming and outgoing cable must be connected.
  • Page 24 All manuals and user guides at all-guides.com Cabling Advisor Advanced System databus preferred wiring The terminator jumper (also called TERM link), or DIP switch must be ON, or a 470 Ω resistor must be fitted at each of the devices at the extreme ends of the daisy chained databus.
  • Page 25 All manuals and user guides at all-guides.com Zone connection The inputs are set up as standard EOL freely programmable zones. However, by programming the zones as dual loop, all zone inputs can be programmed to give a few states indication for the same zone. Depending on the detector model, do the following to set up zones: •...
  • Page 26 All manuals and user guides at all-guides.com Figure 16: Dual loop example ( ) 2 ( ) 2 ( ) 2 (1) Zone terminal (2) Detector Common terminal Alarm relay Z1 Zone 1 input Tamper relay Z2 Zone 2 input Possible EOL connections are listed in “EOL connection types”...
  • Page 27 All manuals and user guides at all-guides.com Zone state Connection details [1] R (kΩ) — (Item 4) <1.00 1.00– 3.42– 6.67– >16.84 3.42 6.67 16.84 RA=4.7 kΩ, RT=2.35 kΩ, — U (V) <2.41 2.41– 5.79– 8.07– >10.74 RF=2.35 kΩ 5.79 8.07 10.74 R (kΩ)
  • Page 28 All manuals and user guides at all-guides.com Zone state Connection details [1] R (kΩ) (Item 7) <0.51 4.52– 0.51– 1.52– 2.94– >40.00 40.00 1.52 2.94 4.52 RA=1 kΩ, RT=1 kΩ, U (V) <1.35 6.24– 1.35– 3.36– 5.29– >12.33 RF=12 kΩ 12.33 3.36 5.29...
  • Page 29 All manuals and user guides at all-guides.com EOL connection types The following EOL connections are used for different input types and EOL values. See “Values for end-of-line resistors” on page 16 for more details. Figure 17: Connection type (1) Single NC (2) Single NO (3) Dual A (default) (4) Dual A with AM...
  • Page 30 All manuals and user guides at all-guides.com Siren connection Figure 18: Siren connection examples S3 S4 S5 S1 C S2 C HC-OUTPUTS SIR TMP AUX POWER LC-OUTPUTS (1) Siren EOL resistor (1 kΩ). It must be (3) Beacon, maximum 50 mA. installed if siren does not contain a (4) Siren tamper EOL resistor.
  • Page 31 All manuals and user guides at all-guides.com Caution: If the PSTN line is provided via the ADSL network, make sure that at least ADSL splitter/filter is used, otherwise the PSTN communication quality may be too low for a reliable reporting. Ethernet connection Figure 20: Ethernet connection (1) Ethernet RJ45...
  • Page 32 All manuals and user guides at all-guides.com Configuration Defaulting the panel When the panel is initially powered up, you are prompted to choose the appropriate default settings. Choose the correct settings for your local regulations. The panel then completes the installation process. See “Initial start- up”...
  • Page 33 All manuals and user guides at all-guides.com • Set keypad output 7 to activate continuous keypad buzzer sound, or output 8 to activate intermittent sound. Siren outputs The siren outputs on the Advisor Advanced control panel have addresses starting from 1 (see Table 3 below). On expanders with siren speaker outputs, output 16 is the siren output.
  • Page 34 All manuals and user guides at all-guides.com Device Zones Outputs Device Zones Outputs — Expander 5 145–176 145–176 Keypad 5 1033–1040 — Expander 6 177–208 177–208 Keypad 6 1041–1048 — Expander 7 209–240 209–240 Keypad 7 1049–1056 — Expander 8 241–272 241–272 Keypad 8...
  • Page 35 All manuals and user guides at all-guides.com Specifications For a list of panel models see “List of panel variants” on page vi. Mains power specifications 230 VAC +10%, −15%, 50 Hz 10% Mains input voltage Current consumption at 230 VAC: ATS1000A(-IP) 300 mA max.
  • Page 36 All manuals and user guides at all-guides.com [1] Current available for auxiliary power and battery charge outputs. [2] Maximum permanent current to power devices external to the control equipment in the absence of alarm conditions. The sum of the auxiliary and COMM power output current cannot exceed the maximum current specified in “Auxiliary current and battery capacity”...
  • Page 37 All manuals and user guides at all-guides.com Standard onboard outputs S1, S2 High current electronic output, rating: 1 A at 13.8 V S3, S4, S5 [1] Low current electronic output, rating: 50 mA at 13.8 V [1] Maximum cable length for low current output connection may not exceed 30 m. For longer distances, use relay output expansion (for example, ATS624 four-relay expander).
  • Page 38 All manuals and user guides at all-guides.com Auxiliary current and battery capacity Table 5: ATS1000A(-IP) maximum available auxiliary current Battery 7.2 Ah 18 Ah 25 Ah 36 Ah 2x25 Ah Reference Discharge Charge Auxiliary current (mA) time (h) time (h) —...
  • Page 39 All manuals and user guides at all-guides.com Common key sequences The authorization method depends on system settings. See “2.2.1.n.3.5 Login options” on page 70 for more information. Note: When an incorrect PIN is entered three times the keypad is locked for 120 seconds.
  • Page 40 All manuals and user guides at all-guides.com Action Programmed method Key sequence  Menu access [2] Menu access with PIN Menu, PIN, Enter  PIN, Menu  Menu access with card Menu, card  Menu access with card and PIN Menu, card, PIN, Enter ...
  • Page 41 All manuals and user guides at all-guides.com Action Programmed method Key sequence  Unset [2][3] Unset with PIN Off, PIN, On   PIN, Off  Unset with card Card  Off, card  Unset with card and PIN Off, card, PIN, On ...
  • Page 42 All manuals and user guides at all-guides.com Function keys Use Table 9 below to describe function keys functionality and availability. See also “2.2.1.n.3.10 Function keys” on page 72. Table 9: Function keys Action     F1 (F + 1) ...
  • Page 43 All manuals and user guides at all-guides.com Programming sequence Advisor Advanced control panels feature a wide range of options designed to match varied requirements. This versatility makes correct configuration more demanding. It's important that you use a structured and controlled approach when programming Advisor Advanced systems.
  • Page 44 All manuals and user guides at all-guides.com 2. Program up/download facilities using menu “9.4 PC connection” (see page 188). 3. Program necessary condition filters using menu “6.1 Condition filters” (see page 117). 4. When outputs are used, program menu “6 Outputs and filters” (see page 116).
  • Page 45 All manuals and user guides at all-guides.com The Advisor Advanced menu If you attempt to select an option that is not authorized for your PIN (for example, user menus), the display shows the message: ERROR Access denied Note: When an incorrect PIN is entered three times the keypad is locked for 120 seconds.
  • Page 46 All manuals and user guides at all-guides.com Option availability Not all options described below may be available. Option availability depends on one of the following: • Firmware version • Panel model (for example, IP or non-IP model) • Installed expansions (for example, wireless expander or GSM communication module) •...
  • Page 47 All manuals and user guides at all-guides.com How to program the options Accessing the installer programming menu The Advisor Advanced system is programmed from the installer programming menu. Before accessing the programming menu, the system administrator must unset the system. Depending on the system settings, you also can be prompted to open the panel housing prior to configuring the system.
  • Page 48 All manuals and user guides at all-guides.com Option Action Result Enter the menu entry Enter menu entry number, or Jump to a specific menu entry Press Enter or Right to enter the selected one Show help Press Help The description of the selected menu entry is displayed (if available) Exit the menu entry Press Left or Clear...
  • Page 49 All manuals and user guides at all-guides.com How to program Yes/No options 01 Zone alarm >Yes< • Up and Down arrow keys: Toggle between options • Enter: Confirm the entry How to edit text 1 Area name >Area 1 < Keys 1 to 9 have alphabetical characters printed above them.
  • Page 50 All manuals and user guides at all-guides.com Confirmation of changes If particular settings are changed, you are prompted to confirm those changes when you exit from the current menu. The following screen appears: Apply settings? >No< Changing of other settings that affect user configuration, like PIN length, Duress method, etc., requires all user database reset.
  • Page 51 All manuals and user guides at all-guides.com Table 13: ATS1135 keypad layout for entering text Character sequence ‘ – & < > Space The keypad layout, as well as the menu text, depends on the language programmed for the user currently logged in. The layout may change depending on the context of the edited value.
  • Page 52 All manuals and user guides at all-guides.com Remote access The panel programming can be accessed remotely via configuration software. A remote access can be gained via IP, GPRS, PSTN or ISDN connection, depending on the available panel hardware configuration and settings. Note: Connection via USB cable is not a remote connection.
  • Page 53 All manuals and user guides at all-guides.com Initial start-up When switched on first time, the system prompts you to perform an installation. INFO Inst required Caution: It is only possible to perform the initial system installation from keypad 1. It is necessary to set appropriate default values for this particular system prior to programming.
  • Page 54 All manuals and user guides at all-guides.com The display shows the installation progress percentage complete. After the installation is complete, the panel restarts. After the installation and the first restart you automatically enter to the programming menu. Next time you will need an authorization to enter the menu.
  • Page 55 All manuals and user guides at all-guides.com Service 1 Service menu 1>Display logs 2 Test menu The Service menu provides an installer with options for commissioning and maintenance such as hardware overview, logs listing, etc. 1.1 Display logs 1>All 2 Mandatory The View logs menu is a fast and easy way to review where alarms have happened.
  • Page 56 All manuals and user guides at all-guides.com Test options 1.2 Test menu 1>Input tests 2 ShockSens test The Tests menu gives you access to all testing functions. 1.2.1 Input tests 1>Show open zn 2 Nbr of used zn Enter the Input test menu to test inputs. 1.2.1.1 Show open zones 0>Zone 1 Panel...
  • Page 57 All manuals and user guides at all-guides.com Notes • Only existing RF expanders are displayed. • The function is not supported in wireless expanders ATS1235 with firmware version older than 1.13. Enter the physical input number on this location. The RSSI is displayed for the selected zone.
  • Page 58 All manuals and user guides at all-guides.com 1.2.1.5 Cam range test 17 Camera 17 18 Camera 18 Range test allows you to verify wireless PIR camera signal reception. Select a camera to activate range test. Camera 17 In range test In this mode, selected wireless PIR cameras show the reception quality with alarm LED colour: •...
  • Page 59 All manuals and user guides at all-guides.com The zone resistance is displayed. Panel 1.1 4.6kOhm Values above 65 kΩ are considered as open state. You can now scroll through the list of inputs by pressing Up or Down. Note: External expanders (DGP) do not support this functionality. 1.2.2 ShockSens test 1>Panel 2 Input exp...
  • Page 60 All manuals and user guides at all-guides.com • Exit output test. On exit, the output returns to its original state. Press Clear. 1.2.3.1.2 Keypad LEDs 1>Keypad 1 2 Keypad 2 Use the Keypad LEDs menu to test keypad and reader LEDs. Choose the keypad and press Enter.
  • Page 61 All manuals and user guides at all-guides.com The menu also allows you to run a walk test for a single zone, as well as a general walk test, which is required by a central station operator to verify all alarm system features, including set and unset, entry and exit, tampers, etc. 1.2.5.1 Walk test start Before walk test starts, you are asked if the reporting to central stations must be enabled.
  • Page 62 All manuals and user guides at all-guides.com When all zones are tested successfully, the following message is displayed. Walk test OK Press ENTER The test is cancelled if the Clear key is pressed. There is also a maximum time limit on the test, set in “8.1.3.3 Walk test time” (see page 140). The test fails if this timer expires.
  • Page 63 All manuals and user guides at all-guides.com 1.2.5.2.6 Siren tamper 6 Siren tamper >No< If the Siren tamper option is set to Yes, the tamper alarms from sirens assigned to this area also have to be tested. 1.2.5.2.7 Frequency 7 Frequency >Never<...
  • Page 64 All manuals and user guides at all-guides.com 1.2.5.3 Single zone WT With reporting >Yes< Before walk test starts, you are asked if the reporting to central stations must be enabled (see “1.2.5.1 Walk test start” on page 51 for details). Select the input location first (panel, internal or external expander).
  • Page 65 All manuals and user guides at all-guides.com 1.2.6.n.2 Period / Time 1 Period >4< If “1.2.6.n.1 Test call mode” on page 54 is set to Period, the menu defines the interval between automatic test calls. The allowed range is 0 (never repeat) to 999 hours.
  • Page 66 All manuals and user guides at all-guides.com 1.2.6.n.6 RSSI in report 6 RSSI in report >Yes< If the option is set to yes, the test call event contains RSSI value as a subevent. The option is only applicable when GSM communication path reporting is used. 1.2.7 IP diagnostic 1>ETH >>>...
  • Page 67 All manuals and user guides at all-guides.com Note: The ping command must be acceptable by the remote host. Make sure its firewalls and routers allow ping requests and replies. This applies to all ping commands. 1.2.7.n.3 Ping PC 1>PC conn 1 ---------------- The Ping PC command allows you to send a ping to the specified PC if it is configured as a PC connection via IP.
  • Page 68 All manuals and user guides at all-guides.com 1.2.8.1 PIN status 1>PIN status Normal The PIN status is an informational screen that lets you verify the PIN acceptance status. The status can be one of the following: • Normal: Accepted by the SIM. •...
  • Page 69 All manuals and user guides at all-guides.com • Stopped: GPRS functionality is available, but connection is stopped due to the disconnection time expiration. See “9.3.n.7.8 Disconn.time” on page 185 for more details. • No data: Unknown error. 1.2.8.6 Network name 6>Network name MyGSM Network name is the name of the GSM network that the GSM dialler is currently...
  • Page 70 All manuals and user guides at all-guides.com Table 20: Msg sent 24h submenus Menu Description 1.2.8.9.1 All SMSes All messages. 1.2.8.9.2 Report SMSes Reporting messages. 1.2.8.9.3 Unknown SMSes User SMS control messages that were not recognized and therefore forwarded to the Supervisor. Note: This counter works only if the SMS forwarding is enabled.
  • Page 71 All manuals and user guides at all-guides.com 1.2.9.1.m.n.1 Test time 1 Test time > 10< Set duration (in minutes) for battery test. Allowed range is 2 to 254. 1.2.9.1.m.n.2 Batt.test freq 2 Batt.test freq >Disabled< Set automatic battery test frequency. The following values are available: •...
  • Page 72 All manuals and user guides at all-guides.com 1.2.9.2.m.n.2 Run/Stop test 2 Run test? >Yes< Run battery test. Test duration is set in “1.2.9.2.m.n.1 Test time” on page 61. If battery test for this device is already running, you are prompted to stop this test.
  • Page 73 All manuals and user guides at all-guides.com Badge another card, or press X to exit the menu. 1.2.12 Demo mode 1-8 Demo mode >1234..< Enable the Advisor Advanced demo mode. Select areas where demo mode will be active. In this mode the system operates with following limitations: •...
  • Page 74 All manuals and user guides at all-guides.com 1.3.2 Defaults The screen shows panel defaults set during installation. See “Initial start-up” on page 43 for details. 1.4 Change PIN 4>PIN ********** You can change your own PIN using the Change PIN menu. The principles of PIN programming are described in “3.1.n.2.1 Change PIN”...
  • Page 75 All manuals and user guides at all-guides.com 1.6 Default panel 6 Default panel >Cancel< The Default panel menu lets you clear all settings and repeat the initial installation. Caution: This command deletes all programming settings, including users. See “Initial start-up” on page 43 for more details. Caution: After defaulting panel, restart the system by powering it down and up.
  • Page 76 All manuals and user guides at all-guides.com Devices 2 Device menu 1>Inst. Remotes 2 Edit Rkp&Exp There are two kinds of bus devices: • Keypads are used to provide system control, such as setting or unsetting areas. Depending on the type of keypad, additional functions may be available, such as LCD displays, menus to set time and date etc.
  • Page 77 All manuals and user guides at all-guides.com Character State MI bus expander is online, but not configured (new) MI bus expander is online, but its address is in conflict with another expander ATS74xx series IP/GPRS dialler is online and configured (polled) —...
  • Page 78 All manuals and user guides at all-guides.com Keypads 2.2.1 Keypad devices 0>Add keypad 1 Keypad 1 Press 0 to add a keypad, or a number to configure an existing one. Note: The maximum number of devices allowed on the databus is given in “General features”...
  • Page 79 All manuals and user guides at all-guides.com 2.2.1.n.2 Keypad address 2>Bus address The bus address is an informational screen showing the bus address set by DIP switches or programmed within the keypad. 2.2.1.n.3 Keypad options 3>Keypad options >>> The Keypad options menu contains the shown below, which are necessary to configure the selected keypad.
  • Page 80 All manuals and user guides at all-guides.com 2.2.1.n.3.4 Control areas 4>Control areas 12.4..The Control areas menu allows you to select areas that can be controlled by this keypad. The areas are displayed as a list. To change the selection, press Enter or Right, and select the appropriate areas.
  • Page 81 All manuals and user guides at all-guides.com • Part set 1-unset / Part set 2-unset: One badge partially sets or unsets areas. If the user privileges allow him to control doors, and “2.2.1.n.3.5.1 1 x door Note: access” on page 70 is set to Yes, the door access is also granted upon one-time badge unset.
  • Page 82 All manuals and user guides at all-guides.com • During E/E: Buzzer remains silent during entry and exit time. 2.2.1.n.3.9 Quick set 9 Quick set >Off< The Quick set option allows setting areas without providing user PIN or card. If this functionality is on, the premises are set after pressing On without user authorization.
  • Page 83 All manuals and user guides at all-guides.com 2.2.1.n.3.12 Area ind.LED2 12 Area ind.LED2 >..< Use Area ind.LED2 to program LED 2 indicator in the same way as described in “2.2.1.n.3.11 Area ind.LED1” on page 72. 2.2.1.n.3.13 Status ind. 13 Status ind. >List<...
  • Page 84 All manuals and user guides at all-guides.com 2.2.1.n.3.17 EE 2 buzzer 17 EE 2 buzzer >Yes< If the option is set to Yes, the buzzer of the selected keypad is active during entry/exit time 2. See “18. Entry/Exit 2” on page 235 for more details. 2.2.1.n.3.18 1+3 keys 18 1+3 keys >Yes<...
  • Page 85 All manuals and user guides at all-guides.com Expanders 2.2.2 Expander devices 0>Add expander 1 Expander 1 On the Expander devices menu, press 0 to add an expander, or a number to configure an existing one. Note: The maximum number of devices allowed on the databus is given in “General features”...
  • Page 86 All manuals and user guides at all-guides.com 2.2.2.n.4 Exp settings 4>Exp settings >>> The Expander settings menu contains menus shown below, which are necessary to configure the selected expander. Note: The available settings depend on the expander type. 2.2.2.n.4.1 Expander name 1 Expander name >Expander 1 <...
  • Page 87 All manuals and user guides at all-guides.com 2.2.2.n.5 Expander menu 5>Expander menu >>> The menu provides an access to the programming menu built-in to the expander. For more information, see the appropriate expander manual. Note: This menu is not available in wireless expanders ATS1235 with firmware version 1.13 and newer.
  • Page 88 All manuals and user guides at all-guides.com 2.2.2.n.4.4.2 Long superv. 2 Long superv. >20< Long supervision sets a fault condition in the panel for a sensor which supervision timer expired. Program the supervision time to control how often the wireless expander checks the sensor is communicating and in range of the wireless expander.
  • Page 89 All manuals and user guides at all-guides.com 2.2.2.n.4.7 Exp version ATS1238.B008 The Expander version screen is an informational screen with the expander version data. 2.2.2.n.4.8 Jamm detection 8 Jamm detection >Enable< The Jamming detection option must be set to Enable if the wireless expander must detect and report communication jamming attempts.
  • Page 90 All manuals and user guides at all-guides.com 2.2.2.n.4.9.1.1 Burglar settings 1>Pic amount Enter the BA settings menu to configure picture settings for burglar alarms. 2.2.2.n.4.9.1.1.1 Pic amount 1 Pic amount >1< Set the number of pictures taken after an event of the selected type occurs. Allowed range is 1 to 30.
  • Page 91 All manuals and user guides at all-guides.com See “2.2.2.n.4.9.1.1 Burglar settings” on page 80 2.2.2.n.4.9.2 Show pic mem Pictures: 12 Left sp for: 123 Free sp: 3,0MB Total sp: 4,0MB The informational screen shows a pictures number currently stored in the wireless PIR camera expander as well as available memory.
  • Page 92 All manuals and user guides at all-guides.com Users and user groups 3 User menu 1>Users 2 User groups Use the User menu to add, edit, or delete users of the Advisor Advanced system. This menu allows also user groups editing. Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 93 All manuals and user guides at all-guides.com Users 3.1 Users 0>Add user 1 Installer The Users menu lets you add, delete and edit system users. Note: If the system is EN 50131 compliant, you can edit only your own settings, and configure only newly added users.
  • Page 94 All manuals and user guides at all-guides.com After a new user is added via menu “3.1.0 Add user” below, the installer can configure this user. After the modification is done and the installer exits from the user menu, the following confirmation request appears: Lock user data? >Cancel<...
  • Page 95 All manuals and user guides at all-guides.com A PIN is generated by selecting Yes and pressing Enter in this menu. The generated PIN is shown until Enter is pressed again.  PINs are entered manually. Pressing Enter lets you enter or edit the PIN of the selected user. The PIN change mode can be set in menu “8.7.6 PIN chg mode”...
  • Page 96 All manuals and user guides at all-guides.com Adding a card If the user has no card assigned, the menu lets you enter a user card number. Press Enter and present the card at the keypad within 10 seconds. INFO Badge card Note: This operation is only possible on LCD keypads with integrated readers.
  • Page 97 All manuals and user guides at all-guides.com 3.1.n.6 User groups 1>Not set 2 Not set Use the User groups menu to assign user groups to the selected user. A user can have up to 8 user groups assigned. User groups define the options and areas available for users.
  • Page 98 All manuals and user guides at all-guides.com 3.1.n.7.2 SMS reporting 2 SMS reporting The SMS reporting menu lets you enable or disable SMS reporting to the selected user. The reporting can have one of the following states: • Always: The reporting is enabled •...
  • Page 99 All manuals and user guides at all-guides.com User groups 3.2 User groups 0>Add UG 1>Installer Grp The User groups program block is used to record information about user groups. What is a user group? A user group allows users to control the Advisor Advanced system alarm options (also called alarm control).
  • Page 100 All manuals and user guides at all-guides.com 3.2.n.2 User group type 2 UG type >Normal user< There are three types of user groups: Normal user, Installer, and Supervisor. These types are provided to comply with EN 50131. User group type defines the default user group options, as well as allowed changes.
  • Page 101 All manuals and user guides at all-guides.com Option User group Normal Supervisor Installer Guard user 27. Schedule access N (U) Y (U) Y (U) Y (U) 28. Fob learning N (U) N (U) 29. Remote pics N (U) N (U) N (U) 30.
  • Page 102 All manuals and user guides at all-guides.com Option Description Create new users (see also “User privilege limitation” on page 93). User adding (none / restricted / all) Forced set Perform a forced set. The availability of this option depends on the system configuration. 10.
  • Page 103 All manuals and user guides at all-guides.com User privilege limitation The User adding option (see Table 24 on page 91) determines whether the user can add new users and what user rights these newly created users have. Table 25: User adding possibilities Option value Privileges None...
  • Page 104 All manuals and user guides at all-guides.com Zones, fobs, and cameras 4 Zones and RF fobs 1>Zone menu 2 RF fobs In the Zones and Fobs programming section all zone and fob parameters are programmed. Each zone can be a physical input on the control panel, an expander, or a plug-in expander, or a wireless device programmed in the wireless expander.
  • Page 105 All manuals and user guides at all-guides.com Zones 4.1 Zone menu 0>Add zone 1 Zone 1 This menu lets you see all programmed zones, select an existing zone, or create a new one. Zone options 4.1.0 Add zone 1>Panel 2 Input Exp Use the Add zone menu to add a new zone.
  • Page 106 All manuals and user guides at all-guides.com When a zone is created, it is given the default name “Zone n”. Enter this menu to edit the current name. A zone name can consist of 16 characters. 4.1.n.2 Zone type 1>Zone type Alarm Use the Zone type menu to set the zone type for a specific zone.
  • Page 107 All manuals and user guides at all-guides.com 4.1.n.6 Zone options 6>Zone options >>> The Zone options menu contains all zone settings. These settings are described below. Note: Not all options may be available. The available options depend on the zone type (see “Zone types” on page 233). 4.1.n.6.1 Inhibit 1 Inhibit >Yes<...
  • Page 108 All manuals and user guides at all-guides.com 141) or the zone has to return to normal and trigger again within the Double Knock interval (see “8.1.4.1 Double knock interval” on page 141). If the option is active, the option “4.1.n.6.29 Held open” on page 103 is not Note: available.
  • Page 109 All manuals and user guides at all-guides.com 4.1.n.6.10 Engineer walk test 10 Eng walk test >No< If the Engineer walk test option is set to Yes, the zone is included in the Engineer walk test. See “1.2.5 Walk test” on page 50 for more details. 4.1.n.6.11 User walk test 11>User walk >Yes<...
  • Page 110 All manuals and user guides at all-guides.com If set to No, the input needs both states to toggle between set and unset (pulse key switch). 4.1.n.6.16 Key set 16 Key set >Off< The Key set option defines the zone as a key switch for area set. The following options are available: •...
  • Page 111 All manuals and user guides at all-guides.com 4.1.n.6.22 Log 22 Log >No< The Log option determines whether the zone event is recorded in the system log. 4.1.n.6.23 CS report 23 CS report >No< The CS report option determines whether the zone event is reported to the central station.
  • Page 112 All manuals and user guides at all-guides.com 4.1.n.6.27 Sensor type 27 Sensor type >Low temp.< The events reported by a technical zone depend on the type of the sensor connected. The Sensor type option specifies what is the sensor and what events it should report.
  • Page 113 All manuals and user guides at all-guides.com See also “Outputs” on page 120. 4.1.n.6.29 Held open 29 Held open >No< The menu defines if this zone raises a “zone open too long” alarm while held open longer than for a defined period. The held open period is defined in “8.1.4.6 Held open time”...
  • Page 114 All manuals and user guides at all-guides.com Notes • This option is only available for panic type zones. See “Zone types” on page 233. • The option is only available when Panic mode is set to Silent. Otherwise panic alarm is always reported as PA event. See “8.8.1 Panic mode” on page 158.
  • Page 115 All manuals and user guides at all-guides.com Note: This menu is only available for a wireless expander ATS1235 with firmware version 1.13 or newer, which is online. 4.1.n.7.1 Sensor ID 1>Sensor ID 10EBA9E The screen allows you to view the sensor ID. Note: First two digits of the sensor identifier also define the sensor type.
  • Page 116 All manuals and user guides at all-guides.com Table 28: Wireless sensor options Option Sensor type Description Reed and contact Door/window sensor Report alarms from both sources Contact Door/window sensor Ignore reed alarms Reed and shock Shock sensor Report alarms from both sources Shock sensor Shock sensor Ignore reed alarms...
  • Page 117 All manuals and user guides at all-guides.com Select a start and the end of device input range. The system creates or modifies the existing zones with parameters equal to the selected zone (except names that are default). Note: Copying zone parameters does not copy a wireless device. The device must be programmed separately.
  • Page 118 All manuals and user guides at all-guides.com Fobs 4.2 RF fobs 0>Add fob 1 Fob 1 This menu lets you see all programmed fobs, select an existing fob, or create a new one. Fob options 4.2.0 Add fob To add a fob, follow one of the procedures described in “Wireless device programming”...
  • Page 119 All manuals and user guides at all-guides.com Table 29: Fob buttons and combinations Buttons Function Button 1 Set all areas Button 2 Unset all areas Button 3 Part set 1 all areas Button 4 Toggle trigger 99 — Buttons 1 + 2 —...
  • Page 120 All manuals and user guides at all-guides.com Cameras For more details on cameras, see also “Using cameras” on page 203. 4.3 Cameras 17>Camera 17 18 Camera 18 The menu allows you to configure camera modules in wireless PIR cameras. 4.3.n Select camera 1>Camera name Camera 17 Select an appropriate camera to configure.
  • Page 121 All manuals and user guides at all-guides.com 4.3.n.3.m.2 Event type <n> 2 Event type 1 >Burglar< Define a type of the condition filter chosen in “4.3.n.3.m Select filter” on page 110. The available filter types are listed in “Camera event types” on page 203. 4.3.n.3.m.3 Report as 3 Report as >Not used<...
  • Page 122 All manuals and user guides at all-guides.com 4.3.n.6 Max pics 24h 6 Max pics 24h >Infinity< Maximum picture number defines how many pictures can be taken by the camera during 24 hours period of set or unset state. The counter is reset when the area changes its set state. The allowed range is 1 to 999, or 0 (infinity), which means unlimited number of pictures.
  • Page 123 All manuals and user guides at all-guides.com Areas 5 Area menu 1>Area 1 2 Area 2 Each area can be programmed with a number of options, like the area name, entry and exit times etc. Before going any further, select the area to program. Area options 5.n Select area 1>Area name...
  • Page 124 All manuals and user guides at all-guides.com 5.n.2.3 PS Exit time 1 5.n.2.4 PS Exit time 2 Configure part set exit timers for entry/exit 1 and entry/exit 2 zone types. Part set exit timers are configured the same way as full set exit timers. See “5.n.2 Exit time”...
  • Page 125 All manuals and user guides at all-guides.com The warning timer can be programmed from 1 to 15 minutes. 5.n.5 Prealarm time 5 Prealarm time > < Every area has its own prealarm timer. When an alarm is triggered, it only generates a local alarm, and the prealarm timer is started.
  • Page 126 All manuals and user guides at all-guides.com Filters, outputs, and triggers 6 Outputs and filters 1>Cond filters 2 Outputs In this programming section outputs, filters and triggers, and their options are programmed. Outputs on panel or expander as well as system triggers can be activated.
  • Page 127 All manuals and user guides at all-guides.com Condition filters 6.1 Condition filters 01>Internal Sir> 02 External Sire A condition filter is an evaluation and a decision-making algorithm. There are 64 pre-programmed filters. How condition filter works A condition filter can be used to control outputs or user groups. Each filter has up to four inputs, and one output.
  • Page 128 All manuals and user guides at all-guides.com 3. In menu “6.1.n.2 Formula” program the condition filter as below: Event or operand Description Keypad.1.7 1> Correct PIN, entered on keypad 1. Zone.10.1 Active Zone 10, which is connected to the key switch and set up in “4 Zones and RF fobs”...
  • Page 129 All manuals and user guides at all-guides.com 6.1.n.2.x Select event Select the appropriate event to configure it. 1>Group Area To choose an appropriate event, you must define the source of the event first. The source is defined by a group of objects, and an object within this group. Available groups are listed in “Advisor Advanced events”...
  • Page 130 All manuals and user guides at all-guides.com Outputs 6.2 Outputs 0>Add output 1 Int. Siren The Outputs menu lets you to see all programmed outputs, select an existing output, or create a new one. Output settings 6.2.0 Add output 1>Panel 2 Output exp When adding a new output, use the Add output menu to select whether the output is located on the panel PCB, output expander, remote expander, or...
  • Page 131 All manuals and user guides at all-guides.com 6.2.n.2 Output location 2>Output loc Panel 1.6 The Output location is a read-only field that is a physical identification of the output in a format “<device> <y>.<z>”, where <device> can be a panel, an expander, or a keypad, <y>...
  • Page 132 All manuals and user guides at all-guides.com If the stop condition filter is set, its activation deactivates the output and resets both described timers. • Double pulsed: Similar to the previous one, except the delay timer is activated by any change of the start condition filter, activation and deactivation. •...
  • Page 133 All manuals and user guides at all-guides.com 6.2.n.7.1 Delay time 1 Delay time >00:00’00< Delay time defines the time between an activation of the condition and switching the output on. Allowed range is 00:00’00 to 12:00’00. 00:00’00 means that the output is activated with no delay.
  • Page 134 All manuals and user guides at all-guides.com 6.2.n.8 Log limit 8 Log limit >Enable< If the Log limit option is set to Enable, only 3 pairs of activating (opening) and restoring (or closing) events coming from a single output are recorded in the log during one set/unset cycle.
  • Page 135 All manuals and user guides at all-guides.com Triggers 6.3 Triggers 0>Add trigger 1 Trigger 1 The Triggers menu allows you to configure system triggers. There can be up to 255 triggers in the system. They can be used in condition filters to control outputs remotely.
  • Page 136 All manuals and user guides at all-guides.com Use the Trigger name screen to enter or change the trigger name. The trigger name can contain up to 16 characters. 6.3.n.2 Delete trigger To remove a trigger, select a trigger using the cursor, or by entering the trigger number, and go to the Delete trigger menu.
  • Page 137 All manuals and user guides at all-guides.com Calendar 7 Calendar 1>Actions >>> The Calendar lets you to configure an automatic execution of specific actions at particular time and date. Panel settings can be automatically adjusted according to the schedule. The Calendar functionality is based on actions. Every action has the following settings: •...
  • Page 138 All manuals and user guides at all-guides.com 7.1.1 Current view 1>Actions 2 Action lists Show actions, action lists, and exceptions scheduled for the current day. Choose actions, action lists, or exceptions to view. 7.1.2 Date view 1 Date >01.01.2000< Show actions, action lists, and exceptions scheduled for the selected day. Enter a date to view.
  • Page 139 All manuals and user guides at all-guides.com Actions 7.2 Actions 0>Add Action 1 Action 1 Action is a user programmed function, which can be done automatically by the system according to the programmed schedule. There can be up to 64 programmable actions in the Advisor Advanced system.
  • Page 140 All manuals and user guides at all-guides.com 7.2.n.4 Function 4 Function >>> The Function menu lets you to assign a user programmable function that should be executed during this action. User function programming is described in “User programmable functions” on page 193.
  • Page 141 All manuals and user guides at all-guides.com Action lists 7.3 Action lists 0>Add Actlst 1 Action list 1 Action lists are used to group configured actions. An action list can contain up to 8 actions. Action list provides a name as a common description for these actions, as well as the possibility to enable or disable all of them in one menu.
  • Page 142 All manuals and user guides at all-guides.com 7.3.n.3 Actions 1>Action 1 2 Not set Choose previously configured actions to configure the action list. An action list can contain up to 8 actions. Choose “Action” to select an action. Choose “Remove” to remove an action from the action list. 7.3.n.4 Delete action list To remove an action list, select an action list using the cursor, or by entering the action list number, and go to the Delete action list menu.
  • Page 143 All manuals and user guides at all-guides.com Exceptions 7.4 Exceptions 0>Add exception 1 Exception 1 Exceptions represent particular time periods when everyday actions are expanded or substituted by other actions. An example of exception is a holiday, when the premises must stay set for 24 hour. Exception validity note There can be up to 64 exceptions available in the system.
  • Page 144 All manuals and user guides at all-guides.com 7.4.n.3 Stop date 3 Stop [dd.mm] >01.01< Enter the last day of the exception in DD.MM format. 7.4.n.4 Year 4 Year >All< Enter the year of the selected exception. The allowed range is 2000 to 2099. Value below 2000 is equal to All.
  • Page 145 All manuals and user guides at all-guides.com An exception can contain up to 4 action lists. Choose “Action list” to select an action. Choose “Remove” to remove an action list from the exception. 7.4.n.10 Delete exception To remove an exception, select an exception using the cursor, or by entering the exception number, and go to the Delete exception menu.
  • Page 146 All manuals and user guides at all-guides.com Schedules 7.5 Schedules 01>Schedule 1 02 Schedule 2 Schedules are timed sets of actions with a weekly structure. Each schedule can contain actions and action lists assigned to particular days of the week. Schedule settings 7.5.n Select schedule 1>Name...
  • Page 147 All manuals and user guides at all-guides.com 7.5.n.5 Week days 1>Monday 2 Tuesday The Week days menu allows you to assign actions and action lists to each day of the week. Choose a day of the week to assign actions and action lists. 1>Actions 2 Action lists Go to the Actions submenu to assign or remove actions for the selected day of...
  • Page 148 All manuals and user guides at all-guides.com System options 8 System option menu 1>Timer menu 2 Engineer opt Use the System menu to program the global system options including timers. Timer options 8.1 Timer menu 1>Time&date 2 Siren options Use the Timer menu to program all system wide timers in this section. Notes •...
  • Page 149 All manuals and user guides at all-guides.com During daylight saving time change, the time always advances on Sunday at 2:00, and rewinds at 3:00. See “Daylight saving note” on page 127 for information on daylight saving Note: time change on programmed actions. 8.1.2 Siren options 1>Activation 2 Delay...
  • Page 150 All manuals and user guides at all-guides.com Caution: In an unset condition the internal siren delay is ignored and the siren activates instantly. 8.1.3 System misc opts The System misc options menu allows you to set up all system programmable timers.
  • Page 151 All manuals and user guides at all-guides.com 8.1.3.6 Installer in-time 6 Inst in-time >00:01’00< The Installer in-time menu allows you to configure the time in which an engineer is allowed to access when granted by a user (see “8.2.1 User code required” on page 143).
  • Page 152 All manuals and user guides at all-guides.com 8.1.4.4 Input delay 4 Input delay > < The Input delay value represents the delay between an input and appropriate zone activation. The allowed range is 0 to 255 seconds. 8.1.4.5 Key box time 5 Key box time >...
  • Page 153 All manuals and user guides at all-guides.com 8.2.1 User code required 1 User code req >Yes< If the User code required option is set to Yes, a user is required to grant the installer an access to the programming menu. See Advisor Advanced User Guide for more information on Installer option.
  • Page 154 All manuals and user guides at all-guides.com code, which he gives to the user. The user enters the calculated code and performs an engineer reset after logging in. Note: If System code is not defined, the engineer reset by user is not available.
  • Page 155 All manuals and user guides at all-guides.com 8.2.4.7 Mains fail 7 Mains fail >Off< If the Mains fail option is set to Yes, mains supply faults require an engineer reset. 8.2.4.8 Siren fault 8 Siren fault >Off< If the Siren fault option is set to Yes, siren faults require an engineer reset. 8.2.4.9 Interconn fault 9 Intconn fault >Off<...
  • Page 156 All manuals and user guides at all-guides.com 8.2.4.13 Do reset 13 Do reset >Cancel< The Do reset command is used to perform the engineer reset. 8.2.4.14 Custom text 14 Custom text > < Use custom text to program a prompt displayed when an engineer reset is required.
  • Page 157 All manuals and user guides at all-guides.com 8.2.7 Remote configuration 7 Remote config If the option is set to Yes, it is allowed to change panel settings remotely via configuration software when the panel is set. Otherwise, the panel must be unset prior to remote programming.
  • Page 158 All manuals and user guides at all-guides.com This records 16 characters of customized text that is displayed on the top line of LCD keypads instead of the default text. Characters include numbers, spaces, or punctuation. 8.3.3 Alarm list 3 Alarm list >Disable<...
  • Page 159 All manuals and user guides at all-guides.com 8.4.1 RTS options 1>Zone alarm The RTS options menu defines conditions that can prevent setting. If a particular condition below has this option set to Yes, its state affects the “Ready To Set” state.
  • Page 160 All manuals and user guides at all-guides.com Condition Description 8.4.2.3 Zone fault Intrusion detector fault 8.4.2.4 Zone tamper Tamper in zone 8.4.2.5 Interconnection fault A critical error caused by communication trouble between internal panel components 8.4.2.6 Mains fault Mains fault, including external fault 8.4.2.7 Battery fault Battery fault, including external fault 8.4.2.8 FTC (Failed to Communicate)
  • Page 161 All manuals and user guides at all-guides.com 8.4.5 Pending alarms 5 Pending alarms >Enable< If set to Enable, the Pending alarms option requires all alarms and faults to be acknowledged. Enable EN Gr3 is equal to Enable except that faults and tampers can only be acknowledged by level 3 user (installer).
  • Page 162 All manuals and user guides at all-guides.com Zones 8.5 Zone options 1>Input mode Dual loop The Input options menu defines options of zone inputs. 8.5.1 Input mode 1 Input mode >Dual loop< The Input mode option determines the configuration of zone inputs in the panel. The following values can be set: •...
  • Page 163 All manuals and user guides at all-guides.com 8.5.3 Siren tamper EOL 3 Sir tamper EOL >4k7< The Siren tamper end of line resistor menu allows you to define an end-of-line resistor value for the siren. The available values are the same as in “8.5.2 EOL” on page 152.
  • Page 164 All manuals and user guides at all-guides.com 8.6.3 EE full set 3 EE full set >No< If the option is set to Yes and the user exits premises during part set exit time (which causes activation of entry/exit zone), part set state changes to full set. Note: The functionality works only if there is exit time defined for part set.
  • Page 165 All manuals and user guides at all-guides.com 8.7.3 Authorization 3 Authorization >Card&PIN< The Authorization menu allows you to change the panel authorization method. 8.7.4 Duress method 4 Duress method >Disabled< The Duress method menu allows you to change the duress entering method. See Advisor Advanced User Guide for more information on available duress methods.
  • Page 166 All manuals and user guides at all-guides.com 8.7.7.2 AB time 1>Intr. AB time The menu allows you to configure the maximum delay between A and B alarms. 8.7.7.2.1 Intrusion AB time 1 Intr. AB time > < The maximum time (0 to 255 minutes) that the system allows for a second intrusion alarm to occur to report a confirmed alarm.
  • Page 167 All manuals and user guides at all-guides.com 8.7.7.5 EE inhibit 5 EE inhibit >Entry/Exit< The EE inhibit option defines the functionality of the access zone in the area (if available) when an entry/exit (EE) zone is inhibited at the end of the AB time (auto-inhibit function).
  • Page 168 All manuals and user guides at all-guides.com Other options 8.8 PA and other 1>Panic mode Silent The menu allows you to configure panic alarm mode, chime, and buzzer options, etc. 8.8.1 Panic mode 1 Panic mode >Silent< Panic mode can be one of the following. Table 36: Panic modes Option Description...
  • Page 169 All manuals and user guides at all-guides.com 8.8.4 Siren retrigger 4 Siren retrig. >No< If there are multiple alarms, and the Siren retrigger option is set to Yes, the external siren activates every time an alarm occurs. Otherwise, the external siren activates only after the first alarm.
  • Page 170 All manuals and user guides at all-guides.com 8.8.9 Card number 10 Card number >Basic< Select the way the card number is represented in the control panel. • Basic. The card number is represented in the standard Advisor Advanced format. • Titan.
  • Page 171 All manuals and user guides at all-guides.com Library 8.9 Library 01>Alarm 02 Area The Library menu allows you to view or delete words stored in the “Word library” (see page 41). You can choose a word to delete. It is not possible to add or edit words from this menu.
  • Page 172 All manuals and user guides at all-guides.com Communications 9 Dialler menu 1>CS 2 Event options The menu is used to program all system-wide communication options. Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 173 All manuals and user guides at all-guides.com Central stations 9.1 Central station 0>Add CS 1 CS 1 The Advisor Advanced system lets you program up to 16 central stations. 9.1.0 Add CS Access the menu to add a central station. If the central station is created successfully, the following message appears: INFO CS added...
  • Page 174 All manuals and user guides at all-guides.com 9.1.n.3 Protocol 3 Protocol >(X)SIA< Choose the appropriate communication protocol. Depending on the settings in “9.1.n.2 Transm path” on page 163, the following protocols can be available: • • (X)SIA • VOICE • •...
  • Page 175 All manuals and user guides at all-guides.com 9.1.n.5.m Select area 1 Area 1 > < Set account numbers for each area. 9.1.n.6 Mode 6 Mode >Primary CS< The following modes are available for CS. • Primary CS: The primary central station must unconditionally receive all addressed events.
  • Page 176 All manuals and user guides at all-guides.com 9.1.n.8.1.1 Area modifier 1 Area modifier >Off< If the Area modifier option is set to Yes, the area modifier is added to the SIA and XSIA reports. This allows you to send event from multiple areas using the same account code.
  • Page 177 All manuals and user guides at all-guides.com 9.1.n.8.2.1 Suppress FTC 1 Suppress FTC >No< If the Suppress FTC option is set to Yes, no FTC fault is activated for this central station when the voice protocol is used. 9.1.n.8.2.2 Without ACK 2 Without ACK >No<...
  • Page 178 All manuals and user guides at all-guides.com PSTN and ISDN specific options 9.1.n.4 Phone 4 Phone > < Every central station reports to one telephone number. The phone number can contain up to 20 digits. The following special characters are available: •...
  • Page 179 All manuals and user guides at all-guides.com 9.1.n.8.3 OH 2000 1>Version OH V1.9.3 The OH 2000 menu allows you to set up a few OH 2000 protocol options that are listed below. 9.1.n.8.3.1 Version 1 Version >OH V1.9.3< The following versions of the OH 2000 protocol can be used for Osborne- Hoffman receiver communication: •...
  • Page 180 All manuals and user guides at all-guides.com Photo transmission specific options Additionally to “IP and GSM/GPRS specific options” described on page 168, it is necessary to set the options below. 9.1.n.4.4 Vid dest port 4 Vid dest port >9000< The destination port is used to send the pictures to a host set up in “9.1.n.4.1 Dest name”...
  • Page 181 All manuals and user guides at all-guides.com 9.1.n.4.2 Phone/User/UG 2 Phone > < This menu depends on the Type value set for the reporting recipient. See menu “9.1.n.4.1 Type” on page 170 for parameters description. Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 182 All manuals and user guides at all-guides.com Events 9.2 Event options 1>CS mapping 2 Voice mapping The Event options menu contains event options. See “Alarm reporting principles” on page 206 for more details on event reporting. 9.2.1 CS mapping 01>AN Report to >1234..<...
  • Page 183 All manuals and user guides at all-guides.com Communication paths 9.3 Path options 1>PSTN 4 IP The Path options menu allows you to configure options for available transmission paths. 9.3.n Select path 1>Path name PSTN Select the appropriate transmission path to configure its options. Available transmission paths depend on the system configuration.
  • Page 184 All manuals and user guides at all-guides.com If Line fault is set to “If used”, the line is being tested only if this path is used for any central station communication, and the account number for this station is set. 9.3.n.4 Expander menu 4 Expander menu >>>...
  • Page 185 All manuals and user guides at all-guides.com 9.3.n.7 Ring count 7 Ring count > < The Ring count screen lets you enter the number of rings before answering an incoming call. The allowed range is 1 to 15. Higher value is equal to infinity, so the incoming calls are not answered at all.
  • Page 186 All manuals and user guides at all-guides.com The following options are configurable in this menu. 9.3.n.4.1 IP config 1 IP config >Dynamic< If the IP config is set to Dynamic, the DHCP is enabled. If this value is Static, you must configure the other options in this menu that are described below.
  • Page 187 All manuals and user guides at all-guides.com menu below. If this option is set to Dynamic, the DHCP is used to obtain the DNS IP address. If DHCP is disabled, this menu is not available. 9.3.n.5.2 DNS server 2 DNS server >000.000.000.00<...
  • Page 188 All manuals and user guides at all-guides.com 9.3.n.8 Link speed 8 Link speed >10 MB< The Link speed menu allows you to choose the Ethernet link speed. The allowed options are: • 10 MB • 100 NB • Auto 9.3.n.9 MAC address 9>MAC address 0051DB3D7E73 MAC address of the Ethernet controller is a read-only value.
  • Page 189 All manuals and user guides at all-guides.com 9.3.n.5.1 SIM card PIN 1 SIM card PIN >0000< The SIM card PIN menu lets you configure the PIN of the SIM card. This menu can also show the following messages: • PUK required •...
  • Page 190 All manuals and user guides at all-guides.com If the network name is unknown (not recognized by the GSM dialler), the network code in square brackets is displayed instead of the name, for example, “+ [20999]”. 9.3.n.5.2.3.0 Rescan nets Scan in progress Please wait The Rescan nets command performs a GSM network scan.
  • Page 191 All manuals and user guides at all-guides.com 9.3.n.5.3 Credit 1>Check now >>> The Credit menu lets you configure and perform GSM account checking. 9.3.n.5.3.1 Check now 1>Check now >>> The Check now menu lets you manually check your GSM account. When received, the account state is displayed on the LCD.
  • Page 192 All manuals and user guides at all-guides.com Note: When the system performs an automatic account check, the response is treated as an SMS from an unauthorized source, and therefore is forwarded to the Supervisor. Please make sure that option “9.3.n.6.2 SMS forwarding” on page 183 is enabled, otherwise the account state response will be lost.
  • Page 193 All manuals and user guides at all-guides.com 9.3.n.6.2 SMS forwarding 0>Off ------------- The SMS forwarding menu lets you choose the phone number to which all unrecognized messages are forwarded (usually the supervisor’s or administrator’s phone). You can also switch off SMS forwarding using this menu. The list contains only those users who: •...
  • Page 194 All manuals and user guides at all-guides.com prior to read SMS reports and responses with special and national characters that exceed the standard GSM charset GSM3.38. Notes • The extended charset is used only if there is no possibility to send the message in the standard charset.
  • Page 195 All manuals and user guides at all-guides.com 9.3.n.7.7 Line fault 7 Line fault >No< If the Line fault option is set to Yes, the line is tested for line faults. If a line fault is present a fault is generated in the system. 9.3.n.7.8 Disconn.time 8 Disconn.time >02:00<...
  • Page 196 All manuals and user guides at all-guides.com 9.3.n.10 MMS Setup 1>MMS center None The menu lets you to configure various MMS settings. Note: Contact your GSM provider to get information on all settings in this menu. 9.3.n.10.1 MMS Center 1 MMS center >...
  • Page 197 All manuals and user guides at all-guides.com 9.3.n.11 Module info 1>Module version 731000V01 The informational screens contain GSM dialer firmware version, modem type, etc. Advisor Advanced ATSx000A(-IP) Installation and Programming Manual...
  • Page 198 All manuals and user guides at all-guides.com PC connections 9.4 PC connection 1>Connections >>> A PC connection can be used for: • Upload / download (U/D) • Management • Remote control The PC connection menu allows you to set up the PC connection parameters. 9.4.1 Connections 0>Add PC conn 1 PC conn 1...
  • Page 199 All manuals and user guides at all-guides.com 9.4.1.n.2 Transm path 2>Transm path PSTN The Transmission path option defines which communication path is used to establish the selected PC connection. Note: The next options in this menu differ for specific transmission paths. The text in square brackets identifies the transmission path that the option is applicable to.
  • Page 200 All manuals and user guides at all-guides.com 9.4.2 PC callback 1>Primary 2 Backup The PC callback option defines which PC connection is used as a callback station. If the PC call back option is set to Off (no connection assigned), then auto- answer is active.
  • Page 201 All manuals and user guides at all-guides.com IP and GSM/GPRS specific options 9.4.1.n.4 Destination/IP 1>Dest name None The Destination menu defines IP details for the selected PC connection. It also allows you to ping the host. 9.4.1.n.4.1 Dest. name 1 Dest name/IP >...
  • Page 202 All manuals and user guides at all-guides.com GSM specific options 9.4.1.n.3 Conn. type 3 Conn. type >CSD< The Connection type menu defines what GSM connection is used. The following options are available: • CSD: The modem functionality is used. • GPRS: The GPRS functionality is used.
  • Page 203 All manuals and user guides at all-guides.com User programmable functions You can program your own user functions that can later be activated automatically or manually. For example, you can program a user function for setting an area or switching on an output, and then define a schedule for it. Programming menu The function programming menu is accessible from various menus where user programmable functions are used.
  • Page 204 All manuals and user guides at all-guides.com Type Description Available parameters Chime area Change a chime functionality status 1. Areas selection in the area 2. Status change: Clear, Set, or Toggle Chime keypad Change a chime functionality status 1. Keypad selection on the keypad 2.
  • Page 205 All manuals and user guides at all-guides.com The described functions can be activated by one of the following: • Schedule. See “Calendar” on page 127 for more details. • Function key. See “Function keys” on page 32 and “2.2.1.n.3.10 Function keys”...
  • Page 206 All manuals and user guides at all-guides.com Autoset The Advisor Advanced system allows autoset configuration. The system can be set automatically via schedule. The following options must be considered when providing an autoset facility. • Using menu “7.2 Actions” on page 129, create an action with Set function. See also “User programmable functions”...
  • Page 207 All manuals and user guides at all-guides.com Wireless device programming To add a wireless device, follow one of the following procedures. Learning wireless sensors There are two modes available for learning a wireless device, sequential and manual. Sequential mode In sequential mode, you can quickly learn a range of wireless sensors. To learn sensors in sequential mode: 1.
  • Page 208 All manuals and user guides at all-guides.com If there are more wireless devices to program, and the consecutive wireless zones are available in the wireless expander, repeat activating another wireless device. INFO Tamper RF 2 To stop the learning process and exit the menu, press Clear. If next zones are already occupied on the wireless expander, the learning process is over.
  • Page 209 All manuals and user guides at all-guides.com If the input has been already programmed, you are informed by a message and seven beeps. INFO RF exists Next you are asked if you want to replace the programmed wireless device. Replace RF dev? >No<...
  • Page 210 All manuals and user guides at all-guides.com 2. Select fob zone location. Learn mode >Sequential< 3. Choose Sequential mode and press Enter. Input number > < 4. Choose an input number. INFO Program fob 1 5. Press the programming key sequence to activate the fob. See “Device activation”...
  • Page 211 All manuals and user guides at all-guides.com 4. Enter the input number. If the input is free, you are prompted to activate the wireless device. Program fob 1 Press # for ID 5. Press the programming key sequence to activate the fob, or press Enter to enter fob identifier and fob encryption key manually.
  • Page 212 All manuals and user guides at all-guides.com 1 or 2 zones >2< If 1 zone is selected, this zone functionality depends on sensor configuration. See “4.1.n.7.4 Sensor opt” on page 105. If 2 zones are selected, the device must occupy two consecutive zones. If the second zone has been already programmed, there is an error displayed.
  • Page 213 All manuals and user guides at all-guides.com Using cameras A wireless PIR camera is a wireless PIR detector with a camera built-in. The camera can be programmed to take pictures in case of activation of associated zones, conditional filters, as well as by manual activation or remote requests. After an alarm the associated pictures are sent to a central station via IP/GPRS.
  • Page 214 All manuals and user guides at all-guides.com Table 39: Camera events and reporting codes Event type Activated by zone type [1] SIA code [2] Burglar alarm 1. Alarm, 2. Entry/Exit 1, 3. Access, 6. 24H, 13. Fire door, 16. Key box, 18. Entry/Exit 2 Fire alarm 4.
  • Page 215 All manuals and user guides at all-guides.com Diagnostics If necessary, use the following menus for diagnostics: - “1.2.1.3 RF RSSI test” on page 46 - “1.2.1.4 RF diagnostics” on page 47 - “1.2.1.5 Cam range test” on page 48 Troubleshooting Camera busy message Camera busy message may appear when a camera or a wireless expander do not respond to a request because one the following operations is currently in...
  • Page 216 All manuals and user guides at all-guides.com Alarm reporting principles Event conditions See “Reporting codes used in Advisor Advanced” on page 223 for a list of events that can be reported to central stations. When a new event occurs, the system performs a few checks below before it is reported to central stations.
  • Page 217 All manuals and user guides at all-guides.com the same account code is reported to the central station. Other area set and unset events are not reported. For example, premises include areas 1, 2, and 4 (that have the same account code).
  • Page 218 All manuals and user guides at all-guides.com After all necessary events are successfully reported to the central station, the system closes the communication and tries to contact the next central station, which the active events need to be reported to. Event priority In the queue of events waiting for the central station reporting, events with higher priority are transmitted first.
  • Page 219 All manuals and user guides at all-guides.com Programming Advisor Advanced via configuration software There are different PC configuration and administration tools that are designed to make Advisor Advanced system programming fast and simple, without the need for complex commands or strings. All the information is entered directly from your Windows desktop.
  • Page 220 All manuals and user guides at all-guides.com Upgrading Advisor Advanced firmware The Advisor Advanced panel firmware is upgradeable via USB DFU (device firmware upgrade) interface. Use the AAFlash software to do that. Access level 4 (manufacturer) applies when changing the operating program software and needs to be executed at the local programming site.
  • Page 221 All manuals and user guides at all-guides.com After that, the USB LED turns on, the TX LED turns off, and the RX LED continues blinking. If this is the first DFU connection, the system prompts you to find Advisor Advanced USB DFU drivers to install. Choose the driver located in the subdirectory “Driver”...
  • Page 222 All manuals and user guides at all-guides.com Troubleshooting Recovery procedure If the installer PIN is lost, installer access is impossible. In this case the installer can perform a recovery procedure. To recover installer access: 1. Remove mains and battery power from the panel. 2.
  • Page 223 All manuals and user guides at all-guides.com Condition Possible cause The panel is not reporting to the The telephone line connections may be wired incorrectly. See “Cabling Advisor Advanced” on page 14. central station The central station receiver does not support the programmed protocol.
  • Page 224 All manuals and user guides at all-guides.com Condition Possible cause The termination may be incorrect. See “Cabling Advisor The expander appears to be going off-line and on-line (indicated by Advanced” on page 14. “Expander fail” on a LCD keypad) Some or all expander zones are The zone numbers for the expander have been calculated permanently in tamper (or incorrectly, and zone type numbers have therefore been...
  • Page 225 All manuals and user guides at all-guides.com Advisor Advanced events Table 40: Advisor Advanced events Group Event Event description Notes Zone ACTIVE Zone active Zone in active state TAMPER Zone tamper Zone in tamper state Zone masking Zone in anti-mask alarm state BATTFAULT Zone battery fault Zone in battery fault state...
  • Page 226 All manuals and user guides at all-guides.com Group Event Event description Notes FTCFIREDOOR Fire door and FTC A fire door active while FTC present FIRE Fire alarm A fire alarm active FSFIRE Fire alarm during A fire alarm active while area full full set PSFIRE Fire alarm during...
  • Page 227 All manuals and user guides at all-guides.com Group Event Event description Notes FTCTAMPER Tamper and FTC A tamper alarm active while FTC present CHIME Chime Active for 2 sec when zone with chime option is active PSCHIME Chime during part Active for 2 sec when zone with chime option is active during part set...
  • Page 228 All manuals and user guides at all-guides.com Group Event Event description Notes EXITFAULT Exit fault Alarm detected during exit state before changing to part or full set state Ready To Set Active when all configured RTS conditions are valid SETOK Area set OK Active for 2 s when area set successfully...
  • Page 229 All manuals and user guides at all-guides.com Group Event Event description Notes HA-ALARM A hold-up alarm Reset after unset HB-ALARM B hold-up alarm Reset after unset Keypad OFFLINE Keypad is offline Active if a keypad is offline RTE triggered Keypad RTE input triggered CODETAMPER Code tamper Active when a keypad is locked...
  • Page 230 All manuals and user guides at all-guides.com Group Event Event description Notes LFISDN ISDN line fault ISDN line fault detected LFGSM GSM line fault GSM line fault detected Failed To Failed to deliver an alarm Communicate message MIFAULT Line fault PSTN MI Bus communication fault MIFISDN Line fault ISDN...
  • Page 231 All manuals and user guides at all-guides.com Group Event Event description Notes RPRGACTV Remote Remote programming active programming TIMECHG Time Changed System time changed SSAVER Armed display Armed display active ISIREN Internal siren Internal siren event flag (system flag) ESIREN External siren External siren event flag (system flag)
  • Page 232 All manuals and user guides at all-guides.com Group Event Event description Notes Fob learned Fob programmed Active for 3 seconds after a successful programming Button 1 Button 1 pressed Button 2 Button 2 pressed Button 3 Button 3 pressed Button 4 Button 4 pressed Button 1+2 Buttons 1 and 2...
  • Page 233 All manuals and user guides at all-guides.com Reporting codes used in Advisor Advanced Table 41 below shows descriptions of SIA, CID, and VdS reporting codes used in Advisor Advanced. Table 42 on page 228 lists allowed values for the appropriate reporting codes. Table 41: SIA, CID, and VdS reporting code descriptions Function Note...
  • Page 234 All manuals and user guides at all-guides.com Function Note Reporting code code code priority 0x30 E143 Expansion trouble Expander / keypad trouble E300 Expansion trouble Expander fuse failure E330 Expansion trouble Expander / keypad communication fault 0x10 E110 Fire alarm High 0x51 E570...
  • Page 235 All manuals and user guides at all-guides.com Function Note Reporting code code code priority 0x21 E375 Panic trouble 0xD1 R570 Panic unbypass 0x74 E416 Remote programming begin — E602 Automatic test / ring-in test 0x53 E305 Power up System power-up 0xF4 R416 Remote programming...
  • Page 236 All manuals and user guides at all-guides.com Function Note Reporting code code code priority 0x33 E302 System battery / fuse Expander / dialler battery low trouble / fuse fault Technical alarm — low 0x40 E152 Low temperature detector Medium temperature alarm Technical bypass —...
  • Page 237 All manuals and user guides at all-guides.com Function Note Reporting code code code priority Technical bypass — 0x51 E570 High temperature detector high temperature inhibit Technical unbypass — 100. KU 0xD1 R570 High temperature detector high temperature uninhibit 101. KS 0x30 E381 Technical long...
  • Page 238 All manuals and user guides at all-guides.com Table 42: SIA and CID reporting code values Subevent type and range Group Point range code code range Zone (1–128, 257–368) R393 Area (1–8) Zone (1–128, 257–368) Expander (299–307) R301 System (0) Expander (65–72) Zone (1–128, 257–368) E393 Area (1–8) Zone (1–128, 257–368)
  • Page 239 All manuals and user guides at all-guides.com Subevent type and range Group Point range code code range Zone (1–128, 257–368) E373 Area (1–8) Zone (1–128, 257–368) Zone (1–128, 257–368) R570 Area (1–8) Zone (1–128, 257–368) – – – Zone (1–128, 257–368) User (1–50) E121 Area (1–8) User (1–50)
  • Page 240 All manuals and user guides at all-guides.com Subevent type and range Group Point range code code range – − − System (0) − System (0) E601 System (0) Zone (1–128, 257–368) E144 Area (1–8) Zone (1–128, 257–368) Expander (299–307), keypad E145 System (0) Expander (65–72), (401–408)
  • Page 241 All manuals and user guides at all-guides.com Subevent type and range Group Point range code code range Zone (1–128, 257–368) E381 Area (1–8) Zone (1–128, 257–368) Zone (1–128, 257–368) R570 Area (1–8) Zone (1–128, 257–368) Expander (316–324) E321 System (0) Expander (65–72) Expander (316–324) R321 System (0)
  • Page 242 All manuals and user guides at all-guides.com Subevent type and range Group Point range code code range 115. TS Area (1–8) E607 Area (1–8) Area (1–8) 116. TE Area (1–8) R607 Area (1–8) Area (1–8) 117. LU System (0) R628 Area (1–8) Area (1–8) 118.
  • Page 243 All manuals and user guides at all-guides.com Zone types The following zone types are available. 1. Alarm Generates no alarm when the area is unset. Generates an alarm when the area is set. Example: Internal door, PIR (motion detector). 2. Entry/Exit 1 Generates no alarm when the area is unset.
  • Page 244 All manuals and user guides at all-guides.com Example: Panel tampers. 8. Exit terminator This zone type is used to terminate an exit time. If the zone switches from active to normal, the exit time is terminated and the area(s) are completely set as soon as the final set delay has expired (see also “8.1.3.5 Final set delay”...
  • Page 245 All manuals and user guides at all-guides.com 17. Eng. reset This zone activation causes the engineer reset. 18. Entry/Exit 2 An alternative entry/exit zone. Example: Back entrance. Entry/exit 2 zone initiates alternative entry/exit timers. See “5.n.2 Exit time” on page 113” and “5.n.3 Entry time” on page 114. See also “2.
  • Page 246 All manuals and user guides at all-guides.com Options: 4.1.n.6.18 Technical full 4.1.n.6.19 Technical unset 4.1.n.6.20 Technical part − − − − − − − 4.1.n.6.21 Keypad LCD • • • • • • • • • • 4.1.n.6.22 Log • •...
  • Page 247 All manuals and user guides at all-guides.com Options affected by EN 50131 regulations EN 50131 Grade 2 Required settings The following options and values are mandatory for EN 50131-1 Grade 2 regulations. • 1.2.6.n.2 Period / Time, 24 h for every path to meet ATS Class 2, 4 h for the IP path to meet ATS Class 4.
  • Page 248 All manuals and user guides at all-guides.com Caution: When any option, any additional function or any additional zone type in this section does not comply with the EN 50131 requirements, the EN 50131 Grade 2 label must be removed from the system. Additional functions The Wireless PIR Camera functionality brings along video verification feature, this additional function is fully available without compromise to standards the...
  • Page 249 All manuals and user guides at all-guides.com Options affected by other regulations ACPO policy Required settings are all EN 50131 Grade 2 settings with the following modifications: • 5.n.7 Entry alarms, Delayed • 8.2.4 Engineer reset, tamper enabled • 8.7.7 Alarm confirm: - AB mode, enabled for all relevant areas - AB time, 30 min minimum, 60 min maximum - EE Confirm, enabled...
  • Page 250 All manuals and user guides at all-guides.com...
  • Page 251 All manuals and user guides at all-guides.com Glossary Access control The control of entry to, or exit from, a security area through doors. Action Action is a user programmed function, which can be done automatically according to the programmed schedule. Action list Action lists are used to group configured actions.
  • Page 252 All manuals and user guides at all-guides.com Data gathering panel. See Expander. Dialler An electronic device that allows the Advisor Advanced system to transmit alarms and other events to a central station. Can also be used to perform up/download. Disarmed See Unset.
  • Page 253 All manuals and user guides at all-guides.com Normal / Active / Describes the condition of a zone. Tamper / Inhibited / • Normal: The zone is not activated. For example, fire exit door closed. Isolated / Masked / • Active: The zone is activated. For example, fire exit door open. Fault •...
  • Page 254 All manuals and user guides at all-guides.com The condition of an area where a change in the status of any zone (from normal to active) causes an alarm. An area or premise is only set when it is unoccupied. Some zones (like vaults) can remain armed continually. Schedule A timed set of actions with a weekly structure.
  • Page 255 All manuals and user guides at all-guides.com Index armed display, 147 timeout, 140 access zone, 233 automatic battery test, 60, 61 account, 181 autoset, 114, 196 action, 127 action list, 131 condition filter, 130 creating, 129 basic setup, 33 deleting, 130 battery function, 130 status, 60...
  • Page 256 All manuals and user guides at all-guides.com central station, 163 deleting a trigger, 126 destination name, 168, 191 deleting a user, 88 destination port, 168, 191 deleting a user group, 93 Downloader, 209 deleting an action, 130 encryption, 170 deleting an action list, 132 events, 172 deleting an exception, 135 frequent heartbeat, 169...
  • Page 257 All manuals and user guides at all-guides.com expander, 66, 75 GSM network, 179 dual loop, 76 availability, 179 EOL, 76 code, 59 input mode, 76 diagnostic, 57 isolate, 76 PIN status, 58 name, 76 registration, 58 resistor values, 76 scan, 180 settings, 76 signal strength, 59 single zone, 76...
  • Page 258 All manuals and user guides at all-guides.com output, 116 active time, 123 add, 120 EE timer, 148 delay, 123 LCD backlight, 73 delete, 124 LCD message, 147 edit, 120 LCD options, 147 mode, 121 LDR, 47 name, 120 learn card, 86 test, 49 LED test, 50 line number, 169...
  • Page 259 All manuals and user guides at all-guides.com remote configuration, 147 soak test, 98 remote login, 85 time, 141 remote PIN, 85 software revision, 63 remove special walk test mode, 54 fob, 109 standard walk test, 51 RF device, 106, 109 start filter, 121 reporting, 206 start time, 129...
  • Page 260 All manuals and user guides at all-guides.com user group, 89 wireless device, 104, 109, 197 changing, 89 supervision, 105 creating, 89 wireless sensor, 197 deleting, 93 word library, 41, 161 name, 89 options, 90, 91 privilege limitation, 93 zone, 95 type, 90 access, 103 what is a user group, 89...
  • Page 261 All manuals and user guides at all-guides.com Programming Map 1 Service menu 1.1 Display logs 1.2 Test menu 1.2.1 Input tests 1.2.1.1 Show open zones 1.2.1.5 Cam range test 1.2.1.2 Number of used zones 1.2.1.6 Inactive days 1.2.1.3 RF RSSI test 1.2.1.7 Zone kOhm 1.2.1.4 RF diagnostics 1.2.2 ShockSens test...
  • Page 262 All manuals and user guides at all-guides.com 1.2.9 Battery test 1.2.9.1 Test options 1.2.9.1.m Select device type 1.2.9.1.m.n Select device 1.2.9.1.m.n.1 Test time 1.2.9.1.m.n.2 Batt.test freq 1.2.9.1.m.n.3 Start time 1.2.9.2 Man. Bat. test 1.2.9.2.m Select device type 1.2.9.2.m.n Select device 1.2.9.2.m.n.1 Test time 1.2.9.2.m.n.2 Run/Stop test 1.2.10 Panel diag...
  • Page 263 All manuals and user guides at all-guides.com 2 Device menu 2.1 Installed remote devices 2.2 Edit Keypad&Exp 2.2.1 Keypad devices 2.2.1.0 Add keypad 2.2.1.n Select keypad 2.2.1.n.1 Keypad type 2.2.1.n.2 Keypad address 2.2.1.n.3 Keypad options 2.2.1.n.3.1 Keypad name 2.2.1.n.3.2 Tamper area 2.2.1.n.3.3 View areas 2.2.1.n.3.4 Control areas 2.2.1.n.3.5 Login options...
  • Page 264 All manuals and user guides at all-guides.com Wireless specific options: 2.2.2.n.4.4 Supervision 2.2.2.n.4.4.1 Short superv. 2.2.2.n.4.4.3 Smoke superv. 2.2.2.n.4.4.2 Long superv. 2.2.2.n.4.5 R. Sensitivity 2.2.2.n.4.6 Expander mode 2.2.2.n.4.7 Exp version 2.2.2.n.4.8 Jamm detection 2.2.2.n.4.11 Default expander Camera specific options: 2.2.2.n.4.9 Pic options 2.2.2.n.4.9.1 Pic settings 2.2.2.n.4.9.1.1 Burglar settings 2.2.2.n.4.9.1.1.1 Pic amount...
  • Page 265 All manuals and user guides at all-guides.com 3.2 User groups 3.2.0 Add user group 3.2.n Select user group 3.2.n.1 User group name 3.2.n.4 User group filter 3.2.n.2 User group type 3.2.n.5 User group options 3.2.n.3 User group areas 3.2.n.6 Remove user group 4 Zones and RF fobs 4.1 Zone menu 4.1.0 Add zone...
  • Page 266 All manuals and user guides at all-guides.com 4.2 RF fobs 4.2.0 Add fob 4.2.n Select fob 4.2.n.1 Fob name 4.2.n.2 Assigned user 4.2.n.3 Buttons 4.2.n.3.1 Select button 4.2.n.4 RF details 4.2.n.4.1 Sensor ID 4.2.n.4.2 Remove RF dev 4.2.n.5 Remove fob 4.3 Cameras 4.3.n Select camera 4.3.n.1 Camera name...
  • Page 267 All manuals and user guides at all-guides.com 6 Outputs and filters 6.1 Condition filters 6.2 Outputs 6.1.n Select filter 6.2.0 Add output 6.1.n.1 Filter name 6.2.n Select output 6.1.n.2 Formula 6.2.n.1 Output name 6.1.n.2.0 Add event 6.2.n.2 Output location 6.1.n.2.x Select event 6.2.n.3 Invert output 6.1.n.2.y Select operator 6.2.n.4 Start filter...
  • Page 268 All manuals and user guides at all-guides.com 8 System option menu 8.1 Timer menu 8.1.1 Time and date 8.1.2 Siren options 8.1.2.1 Activation 8.1.2.2 Delay time 8.1.2.1.1 Internal siren 8.1.2.2.1 Internal siren 8.1.2.1.2 External siren 8.1.2.2.2 External siren 8.1.2.1.3 F/P/M internal 8.1.2.1.4 F/P/M external 8.1.3 System misc opts 8.1.3.1 Armed display...
  • Page 269 All manuals and user guides at all-guides.com 8.5 Zone options 8.6 Part set 8.5.1 Input mode 8.6.1 Report BA 8.5.2 EOL 8.6.2 Access to EE 8.5.3 Siren tamper EOL 8.6.3 EE full set 8.5.4 Swinger shunt 8.6.4 PS1 name 8.6.5 PS2 name 8.7 Panel and AB options 8.7.1 Panel name 8.7.4 Duress method...
  • Page 270 All manuals and user guides at all-guides.com 9 Dialler menu 9.1 Central station 9.1.0 Add CS 9.1.n Select central station Common options: PSTN and ISDN specific options: 9.1.n.1 CS name 9.1.n.4 Phone 9.1.n.2 Transm path 9.1.n.3 Protocol IP and GSM/GPRS specific options: 9.1.n.5 Accounts 9.1.n.4 Destination/IP 9.1.n.5.m Select area...
  • Page 271 All manuals and user guides at all-guides.com 9.3 Path options 9.3.n Select path Common options: IP specific options: 9.3.n.1 Path name 9.3.n.3 Transm path 9.3.n.2 Line fault 9.3.n.4 IP config 9.3.n.4 Expander menu 9.3.n.4.1 IP config 9.3.n.4.2 IP address PSTN specific options: 9.3.n.4.3 Subnet mask 9.3.n.3 Line fault delay 9.3.n.4.4 Gateway...
  • Page 272 All manuals and user guides at all-guides.com 9.3.n.7 GPRS Setup 9.3.n.7.1 APN 9.3.n.7.6 Firewall 9.3.n.7.2 User name 9.3.n.7.7 Line fault 9.3.n.7.3 User password 9.3.n.7.8 Disconn.time 9.3.n.7.4 IP config 9.3.n.7.9 Max Pics 24h 9.3.n.7.5 DNS config 9.3.n.8 Ring setup 9.3.n.8.1 Ring count 9.3.n.8.2 Omit 1st call 9.3.n.9 Encryption 9.3.n.10 MMS Setup...

This manual is also suitable for:

Interlogix advisor advanced ats 000a-ip seriesInterlogix advisor advanced ats1000aInterlogix advisor advanced ats1000a-ipInterlogix advisor advanced ats2000aInterlogix advisor advanced ats2000a-ipInterlogix advisor advanced ats1000a-sm ... Show all