Auto Repeat; Recording; Recording & Otr (One Touch Recording); Timer Recording - Magnavox CMWD2206 - Owner's Manual

Auto Repeat

This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
1 Press [MENU], and choose
"AUTO REPEAT" during playback.
MENU
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the stop mode.
Recording g
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see "RF Output Channel" section on page 6.
VCR
1 2
Insert a cassette with Select the channel
tab into this unit. to record.
1 2
4 5
7 8
0
3
Press [SPEED] to select the desired tape speed.
SPEED
Tape Speed Recording/Playback Time
Type of tape
T60
SP
SP mode 1hour
SLP mode 3hours
4
Press [RECORD] repeatedly to select the
desired recording length.
RECORD
REC OTR(0:30)
(Normal recording)
REC
OTR(8:00)
5 6
To stop recording To eject the record-
ed cassette
STOP

Timer Recording

VCR
• Insert a tape with its record tab into the unit.
1 Press [MENU], then select "TIMER PROGRAMMING".
B TIMER PROGRAMMING
MENU
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 Select an empty program number.
Then press [B] to go to next step.
or
3 Select "ONCE", "DAILY" (Mon-Fri), or "WEEKLY".
Then press [B] to go to next step.
or
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
or
3
STANDBY-ON
SPEED
1 2
4 5
2
7 8
0
3
DISPLAY VCR
6
or
SKIP/CH.
9
5
RECORD
4
MENU
SETUP TOP MENU
T120 T160
You CANNOT dub a DVD to a videotape.
2hours 2-2/3hours
6hours 8hours
To stop recording temporarily (Pause mode) p
Press [PAUSE F].
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark rep-
resents one minute.
• Press it again to resume recording.
OTR(1:00).....
• Pause mode will be automatically canceled after 5 minutes to prevent damage to
OTR(7:30)
the tape and the video head.
Hint
• If you want to watch one channel while recording another...
1) If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.
OPEN/CLOSE
/EJECT
2) You cannot record one channel while watching another if you have a cable box or satellite
receiver.
- M E N U - TIMER PROGRAMMING
PROG 12345678
[OFF]
DATE
START TIME
END TIME
CHANNEL
REC SPEED
Available program number flashes.
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – –
END TIME – – : – –
CHANNEL – –
REC SPEED – –
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
2 Press [B] for
"AUTO REPEAT", "ON" or "OFF".
6
OPEN/CLOSE
/EJECT STANDBY-ON
AUDIO
POWER ON
3
SKIP/CH.
REW
6 VIDEO AUDIO
VCR/TV
9
SLOW
+10
DVD PAUSE
PLAY
Accidental erasure prevention
STOP
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it
ENTER
later, cover the hole with adhesive tape.
RETURN
g p y
Select the desired date.
4
Then press [B] to go to next step.
or
or
• You can set a program one year in advance.
5
Select the desired start time (hour)
– –
– –
Then press [B] to go to next step.
or
or
– 12 –
1
REC REC TIMER REC TIMER REC
F.FWD STOP/EJECT PLAY RECORD RECORD
IR
5 6 4
.
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
[ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
OPEN/CLOSE
VCR DVD DISC IN
CHANNEL SOURCE PREV STOP P
Record tab
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 5 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 5 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
EN