Bitte beachten Sie, dass diese Anleitung sowohl die WLAN- als auch die PoE Verbindung der IN-9820 beschreibt. Daher kann es sein, dass einige Punkte nur die WLAN und andere Punkte nur die PoE Verbindung beschreiben. So bezieht sich z.B. die WPS-Funktion rein auf die WLAN-Verbindung. 2-DE Gehen Sie auf https://install.instar.com...
Installieren Sie das Gerät bitte nicht in der Nähe von leicht entzündlichen Ge- genständen. • Der Hersteller INSTAR haftet für keinerlei Schäden, die durch Zubehör oder Firmware von Drittanbietern entstehen. • ACHTUNG: Die Anschlüsse am Anschlusskabel sind nicht wetterfest und müs- sen wettergeschützt installiert werden!
DDNS Kostenfreie DDNS-Adresse für die Verbindung über das Internet Cloud Opt. Speicherung / Verwaltung der Alarmvideos in der INSTAR Cloud FTP-Upload Übertragung von Alarmbildern / Videos per FTP(S) / SFTP Power over Ethernet, IEEE 802.3at (+ Pin 4 und 5 / - Pin 7 und 8)
Page 7
RJ45-LAN-Anschluss für Cat5e-LAN-Kabel oder höher, zum Anschluss an einen Router, Switch oder PoE Switch. 17 - Stromanschluss Für mitgeliefertes 12V / 2A DC Netzteil 18 - Anschlusskabel Mit LAN- und Stromanschluss sowie Alarmeingang, Alarmausgang, Reset 6-DE Gehen Sie auf https://install.instar.com...
Ihre Kamera zugreifen, um diese einzurichten. Schritt 7 Nach Einrichtung Ihrer Kamera können Sie die Kamera gemäß Ihrer Präferenz an der Wand oder an der Decke befestigen. Informationen zur Installation mit Decken- oder Wandhalterung finden Sie im näch- sten Abschnitt. 7-DE Gehen Sie auf https://install.instar.com...
Page 9
Schritt 5: Bringen Sie jetzt die Wandhalterung an der Wand an, indem Sie diese auf die in Schritt 3 befestigte Metallplatte aufsetzen. Anschließend fixieren Sie die Hal- terung durch Anziehen der Schrau- be auf der Unterseite. 8-DE Gehen Sie auf https://install.instar.com...
Page 10
Verwenden Sie die mitgelieferten Schrauben und Dübel, um die Halterung Abb. 3 an der Decke zu befestigen. Schritt 3: Lösen Sie die Schraube an der Halterung und fixieren Sie die Kamera an der Halterung durch Festziehen der Schrauben. 9-DE Gehen Sie auf https://install.instar.com...
6. Smartphone Apps INSTAR bietet kostenfreie Apps für Android, iOS (iPhone / iPad), Windows Pho- ne, Blackberry, AmazonKindle und Windows 10 / 11 (Metro). Um die App zu installieren, suchen Sie bitte nach “InstarVision“ im App Store Ihres Gerätes. InstarVision Der Unterschied zwischen der App und der Weboberfläche (WebUI)
über eine externe Internetverbindung testen. Beachten Sie bitte, dass eine Portweiterleitung nur bei einem öffentlichen IPv4 Internetanschluss funktioniert. Für Informationen zur Portweiterleitung und dem DDNS-Service im Allgemeinen schauen Sie bitte auf: https://remote.instar.de 11-DE Gehen Sie auf https://install.instar.com...
Kamera neu einzurichten. Für mehr Informationen, wie man die Kamera neu installiert, schauen Sie bitte hier: https://install.instar.com. Nach- dem die Kamera wieder verbunden ist, verwenden Sie das INSTAR Camera Tool, um die IP-Adresse der Kamera zu finden und öffnen Sie die WebUI zur neuen Einrichtung.
Nutzer sollten immer VERMEIDEN, am Objektiv zu hantie- ren und DÜRFEN NIEMALS versuchen, das Objektiv manu- Hinweis ell zu justieren. Jede manuelle Justierung resultiert in einem permanenten Verlust des Zooms, was nicht rückgängig ge- macht werden kann. 13-DE Gehen Sie auf https://install.instar.com...
4. Wie kann man sich die Aufnahmen auf der Speicherkarte herunterladen und vieles mehr... 10.2. Firmware-Update INSTAR Kameras erhalten kostenfreie Firmware-Updates. Öffnen Sie die WebUI und gehen Sie auf System -> Firmware-Update, um zu prüfen, ob eine neue Firmware für Ihre Kamera verfügbar ist. Sie können diese dann herunterladen und über die WebUI installieren.
Aufnahmen sicher aufzubewahren. Testen Sie die INSTAR Cloud jetzt kostenfrei für 30 Tage unter https://cloud.instar.de. Die INSTAR Cloud kostet in etwa 1/3 von dem, was andere Anbieter verlangen. Wenn man mit einer Speichereinheit von 10GB für eine Kamera plant (es lassen sich ca.
Sie bitte support@instar.com, um eine RMA- Nummer zu beantragen. Mit dieser RMA können Sie dann das Gerät zur Repa- ratur einsenden. Das INSTAR SERVICE CENTER finden Sie aktuell an folgendem Standort: Firma: INSTAR Deutschland GmbH Hotline: +49 6438 9198992 Raiffeisenstraße 12...
- Alarm notifications by email, push and / or to an alarm server - Supports FTP(S) / SFTP upload of alarm images, videos and / or photo series - Supports TLS encryption for secure HTTPS, FTPS and MQTTS communication - Supports secure video upload to the INSTAR Cloud (optional)
Page 22
6. Smartphone Apps 10-EN 7. Remote Access 11-EN 8. Camera Reset 12-EN 9. Auto-Focus Lens 13-EN 10. Online Material 14-EN 11. INSTAR Cloud 15-EN 12. Technical Data 16-EN 13. Warranty & Disposal 17-EN 14. Legal Information 18-EN 1-EN Go to https://install.instar.com...
Please note that this manual describes both the WLAN and the PoE connection of the IN-9820. Therefore, some sections might only refer to the WLAN con- nection while others are specific to the PoE connection. For instance, the WPS function pertains solely to the WLAN connection. 2-EN Go to https://install.instar.com...
Don’t use the camera for any other purpose than it is made for. • Never install the device near explosive or flammable substances. • INSTAR does not give any warranty if you use any third party firmware. • INSTAR does not give any warranty if you open the camera without authorization. •...
DDNS Free DDNS address to connect to your camera via the internet Cloud Optional upload & management of alarm videos in the INSTAR Cloud FTP Upload Upload alarm images / videos to an FTP server (FTP / FTPS / SFTP) Power over Ethernet, IEEE 802.3at (+ Pin 4 and 5 / - Pin 7 and 8)
355° / 90° 10. MicroSD slot (32GB MicroSD integrated) 11. Speaker 3. Antenna Connectors 12. Alarm Input 13. Alarm Output 14. WPS / Reset 15. Network LED 16. Network Port 17. Power Connector 18. Connection Cable 5-EN Go to https://install.instar.com...
Page 27
PoE switch 17 - Power Connector For included 12V / 2A power supply 18 - Connection Cable With LAN- and power connector as well as alarm input, alarm output and reset 6-EN Go to https://install.instar.com...
Web User Interface (WebUI). Step 7 After you set up your camera, you can now mount it according to your mounting preference. You can refer to the following for wall mounting and ceiling mount. 7-EN Go to https://install.instar.com...
Fig.4. Fig. 5 Step 5: Attach the wall-mount to the metal plate on the wall. Once attached, please tighten the screw at the bottom of the wall-mount. 8-EN Go to https://install.instar.com...
Fig. 3 Step 3: Loosen the screws on the neck of the bracket, put the cam- era in position and fix it on to the bracket by tightening the screws again. 9-EN Go to https://install.instar.com...
You can open the WebUI using a modern HTML5 based web browser on your computer. You only need to use the INSTAR Camera Tool to search for your cam- era’s IP address and then open it inside your default web browser.
LTE / data connection. Please consider that port forwarding only works if your router has a public IPv4 address. For detailed description to port forwarding on your router model and DDNS service in general, please refer to: https://remote.instar.com 11-EN Go to https://install.instar.com...
For more information on how to install your camera again, please visit: https://install.instar.com. Once you connect the camera to the network, use the INSTAR Camera Tool to find out the camera’s IP address and open the camera’s WebUI to start configurating your camera again.
Users should always AVOID tampering with the lens unit and MUST NEVER try to adjust the lens manually. Any man- Notice ual adjustment on the lenses mechanical parts will result in a permenant loss of focus and cannot be undone. 13-EN Go to https://install.instar.com...
10.2. Firmware Update INSTAR cameras will be provided with free firmware updates. Open the WebUI and navigate to System -> Firmware Update to check if there is a new update available for your camera model. You can then download and install the latest firmware directly through the WebUI.
What’s the INSTAR Cloud? The INSTAR Cloud is a purely optional and paid service to backup your record- ings. Try the INSTAR Cloud free of charge for 30 days at https://cloud.instar.de. The INSTAR Cloud costs only about 1/3 of what other cloud platforms demand.
Max. 18 Watt (in normal operation 5 Watt) Operating Temperature - 20°C to 55°C Requirements Web Browser Web browser supporting HTML5 CPU / Graphic Card Dual core (min. 2Ghz) / 256MB+ graphic card Bandwidth Min. 512kbs per camera 16-EN Go to https://install.instar.com...
13. Warranty & Disposal 13.1. Warranty INSTAR offers a 2-year warranty on its products. During this period you can send in your camera for free repair (the shipping cost to our service center will have to be paid by the customer). This excludes cameras installed with custom-made or third party firmware and WebUIs which have not been approved by INSTAR.
Need help?
Do you have a question about the IN-9820 4K and is the answer not in the manual?
Questions and answers