Page 1
- Alarmbenachrichtigung per Email, Push (Textmitteilung) und / oder Alarmserver - Speicherung von Bildern, Videos und / oder Fotoserien per FTP(S) / SFTP - TLS-Verschlüsselung für sichere HTTPS, FTPS, SFTP und MQTTS Verbindungen - Sichere Archivierung der Alarmvideos in der INSTAR Cloud (optional)
Bitte beachten Sie, dass dieses Handbuch sowohl die WLAN- als auch die PoE-Verbindung der IN-9808 4K abdeckt. Einige Abschnitte beziehen sich nur auf die WLAN-Verbindung, während andere spezifisch für die PoE-Verbindung sind. Zum Beispiel ist die WPS-Funktion ausschließlich für die WLAN-Verbindung relevant.
Installieren Sie das Gerät bitte nicht in der Nähe von leicht entzündlichen Ge- genständen. • Der Hersteller INSTAR haftet für keinerlei Schäden, die durch Zubehör oder Firmware von Drittanbietern entstehen. • Das Netzteil muss im Trockenen untergebracht werden, stellen Sie also bitte sicher, dass keine Feuchtigkeit an das Netzteil kommt.
Kostenfreier Point-2-Point-Zugriff mit InstarVision, unterstüzt IPv6 DDNS Kostenfreie DDNS-Adresse für die Verbindung über das Internet Cloud Opt. Speicherung / Verwaltung der Alarmvideos in der INSTAR Cloud FTP-Upload Übertragung von Alarmbildern / Videos per FTP(S) / SFTP Wi-Fi Protected Setup (WPS) zur einfachen WLAN-Einrichtung WLAN / WiFi 2,4 / 5Ghz WLAN, Wi-Fi 5 802.11ac und WPA2/3-Verschlüsselung...
Mit WLAN verbunden Blinkt langsam Verbindet per WPS Kamera ist eingeschaltet Blinkt schnell Keine Verbindung zu WLAN Firmware-Upgrade im Gange LED ausgeschaltet oder keine LED ausgeschaltet oder keine Verbindung mit dem Strom Verbindung mit dem Strom 6-DE Gehen Sie auf https://install.instar.com...
Page 8
Anbindung per LAN u. Netzteil (Netzteil- & Netzwerkkabel) Anbindung per LAN & Netzteil (Netzwerkkabel & Netzteil) WLAN und Lautsprecher (Netzteil- & Lautsprecherkabel) Bei Anbindung per LAN inkl. Netzteil und Lautsprecher (Für Netzwerk-, Netzteil- und Lautsprecherkabel) 7-DE Gehen Sie auf https://install.instar.com...
Page 9
4.5. Halterung Lösen Sie die Schrauben gegen den Uhrzeigersinn, um die Halterung so in die gewünschte Position auszurichten. Anschließend ziehen Sie die Schrauben wie- der fest. 72° 360° 360° 360° 72° 72° 8-DE Gehen Sie auf https://install.instar.com...
Passwort: Schritt 6 Beim ersten Aufruf begrüßt Sie der Kamera-Einrichtungs-Assistent. Bitte folgen Sie jedem Schritt, um Ihre Kamera vollständig einzuricht- en. Sie können anschließend über die Weboberfläche (WebUI) auf Ihre Kamera zugreifen, um diese einzurichten 9-DE Gehen Sie auf https://install.instar.com...
6. Smartphone Apps INSTAR bietet kostenfreie Apps für Android, iOS (iPhone / iPad), Windows Pho- ne, Blackberry, AmazonKindle und Windows 10 / 11 (Metro). Um die App zu installieren, suchen Sie bitte nach “InstarVision“ im App Store Ihres Gerätes. InstarVision Der Unterschied zwischen der App und der Weboberfläche (WebUI)
über eine externe Internetverbindung testen. Beachten Sie bitte, dass eine Portweiterleitung nur bei einem öffentlichen IPv4/ IPv6-Internetanschluss funktioniert. Für Informationen zur Portweiterleitung und dem DDNS-Service im Allgemeinen schauen Sie bitte auf: https://remote.instar.de 11-DE Gehen Sie auf https://install.instar.com...
Netzwerk. Für mehr Informationen, wie man die Kamera neu installiert, schauen Sie bitte hier: https://install.instar.com. Nachdem die Kamera wieder verbun- den ist, verwenden Sie das INSTAR Camera Tool, um die IP-Adresse der Kamera zu finden und öffnen Sie die WebUI zur neuen Einrichtung.
9. Objektivjustage Das Objektiv der IN-9808 4K hat eine Tiefenschärfe (auch Schärfentiefe ge- nannt), die werksseitig auf ca. 10-15m eingestellt wurde. Sofern der Bereich, den Sie überwachen möchten, unscharf ist, müssten Sie das Objektiv justieren. Schieben Sie die obere Abde- ckung nach vorne von der Kame- ra herunter und lösen Sie die vier...
4. Wie kann man sich die Aufnahmen auf der Speicherkarte herunterladen und vieles mehr... 10.2. Firmware-Update INSTAR Kameras erhalten kostenfreie Firmware-Updates. Öffnen Sie die WebUI und gehen Sie auf System -> Firmware-Update, um zu prüfen, ob eine neue Firmware für Ihre Kamera verfügbar ist. Sie können diese dann herunterladen und über die WebUI installieren.
Aufnahmen sicher aufzubewahren. Testen Sie die INSTAR Cloud jetzt kostenfrei für 30 Tage unter https://cloud.instar.de. Die INSTAR Cloud kostet in etwa 1/3 von dem, was andere Anbieter verlangen. Wenn man mit einer Speichereinheit von 10GB für eine Kamera plant (es lassen sich ca.
Ausgang: 12V DC 2A / Eingang: 100-240V Stromverbrauch max. 10W (im Normalbetrieb 5W ohne IR LEDs) Betriebstemperatur - 5°C bis 55°C (-25°C mit optionaler Heizung) Anforderungen Webbrowser Webbrowser mit HTML5-Unterstützung CPU / Grafikkarte Dual Core (min. 2Ghz) / 256MB+ Grafikkarte 16-DE Gehen Sie auf https://install.instar.com...
Sie bitte support@instar.com, um eine RMA- Nummer zu beantragen. Mit dieser RMA können Sie dann das Gerät zur Repa- ratur einsenden. Das INSTAR SERVICE CENTER finden Sie aktuell an folgendem Standort: Firma: INSTAR Deutschland GmbH Hotline: +49 6438 9198992 Raiffeisenstraße 12...
E-Mail: www.instar.com Website: CE-Konformitätserklärung Hiermit erklärt die INSTAR Deutschland GmbH, dass sich dieses Produkt in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 2014/53/EU befindet. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden https://www.instar.com/legal/eu-declarations Internetadresse verfügbar:...
Page 20
INSTAR Deutschland GmbH Ihr Spezialist für Netzwerk- und Sicherheitstechnik...
- Alarm notifications by email, push and / or to an alarm server - Supports FTP(S) / SFTP upload of alarm images, videos and / or photo series - TLS encryption for secure HTTPS, FTPS, SFTP and MQTTS communication - Supports secure video upload to the INSTAR Cloud (optional)
Page 22
6. Smartphone Apps 10-EN 7. Remote Access 11-EN 8. Camera Reset 12-EN 9. Lens Adjustment 13-EN 10. Online Material 14-EN 11. INSTAR Cloud 15-EN 12. Technical Data 16-EN 13. Warranty & Disposal 17-EN 14. Legal Information 18-EN 1-EN Go to https://install.instar.com...
1. Camera Introduction The IN-9808 4K is the latest QFHD PIR Outdoor IP Camera from INSTAR, fea- turing a cutting-edge Panasonic passive infrared (PIR) motion sensor. With four configurable alarm zones that can be linked, the camera minimizes false alarms and alerts you only when a real event occurs.
Never install the device near explosive or flammable substances. • INSTAR does not give any warranty if you use any third party firmware. • The power supply has to be installed in a dry area, it is not made for outdoor use.
DDNS Free DDNS address to connect to your camera via the internet Cloud Optional upload & management of alarm videos in the INSTAR Cloud FTP Upload Upload alarm images / videos to an FTP server (FTP / FTPS / SFTP)
4. Camera Structure 4.1. Delivery Content micro 32GB MicroSD Camera Bracket Sealing Rings Screws & Dowels Allen Key Power Adaptor LAN Cable 2x Antennas Delivery contents in the camera package 4.2. Camera Structure 1-cable 2-cables 3-cables 9 10 5-EN Go to https://install.instar.com...
Page 27
Red: power; blue: network status (Please refer to Section 4.3) 12 - Antenna RP-SMA WiFi antenna connector for 2 antennas Connector 13 - 2x Antennas 3.5 dB Antennas (option: add INSTAR antenna extension cable) 14 - IP66 For sealing cables with IP66 protection. Different scenarios Connector...
Page 28
(Ethernet Cable & Power Adaptor) For LAN and Power (Ethernet Cable & Power Adaptor) For WiFi Connection & Audio Output (Power adaptor & audio cable) For LAN connection including power supply and audio-output (Ethernet cable, power adaptor & audio cable) 7-EN Go to https://install.instar.com...
Page 29
4.5. Bracket Loosen the screws counter-clock wise in order to align the bracket to the desired position. Once the camera is positioned, please tighten the screws again. 72° 360° 360° 360° 72° 72° 8-EN Go to https://install.instar.com...
Username: instar Password: Step 6 You will be greeted with the Camera Setup Wizard. Please follow those steps to finalize the setup process. You can start configurating your camera by using the Web User Interface (WebUI). 9-EN Go to https://install.instar.com...
You can open the WebUI using a modern HTML5 based web browser on your computer. You only need to use the INSTAR Camera Tool to search for your cam- era’s IP address and then open it inside your default web browser.
LTE / data connection. Please consider that port forwarding only works if your router has a public IPv4/ IPv6 address. For detailed description to port forwarding on your router model and DDNS service in general, please refer to: https://remote.instar.com 11-EN Go to https://install.instar.com...
Once you connect the camera to the network, use the INSTAR Camera Tool to find out the camera’s IP address and open the camera’s WebUI to start configurating your camera again.
9. Lense Adjustment The IN-9808 4K standard lens has a depth of field (also focus range) that is ad- justed to a distance of approx. 10 - 15m. In case your area of interest is out of focus, you will have to adjust the lens accordingly.
10.2. Firmware Update INSTAR cameras will be provided with free firmware updates. Open the WebUI and navigate to System -> Firmware Update to check if there is a new update available for your camera model. You can then download and install the latest firmware directly through the WebUI.
What’s the INSTAR Cloud? The INSTAR Cloud is a purely optional and paid service to backup your record- ings. Try the INSTAR Cloud free of charge for 30 days at https://cloud.instar.de. The INSTAR Cloud costs only about 1/3 of what other cloud platforms demand.
Max. 10W (Normal operation 5W w/o IR LEDs) Operating Temperature - 5°C to 55°C (-25°C with optional heater) Requirements Web Browser Web browser supporting HTML5 CPU / Graphic Card Dual Core (min. 2Ghz) / 256MB+ Graphic Card 16-EN Go to https://install.instar.com...
13. Warranty & Disposal 13.1. Warranty INSTAR offers a 2-year warranty on its products. During this period you can send in your camera for free repair (the shipping cost to our service center will have to be paid by the customer). This excludes cameras installed with custom-made or third party firmware and WebUIs which have not been approved by INSTAR.
Website: CE-Declaration of Conformity Hereby, the INSTAR Deutschland GmbH, declares that this device is in com- pliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. The complete copy of the EU Declaration and Conformity can be found on this https://www.instar.com/legal/eu-declarations...
Page 40
INSTAR Deutschland GmbH Your Specialist for Network and Security Equipments Go to https://install.instar.com...
Need help?
Do you have a question about the IN-9808 4K and is the answer not in the manual?
Questions and answers