Using The Charger - Dynex DX-DA100501 User Manual

DX-DA100501 English - combined.fm Page 6 Monday, August 7, 2006 12:25 PM
6
To use with a 12 V DC (car) power connector:
1 Connect the 12 V DC car cord barrel plug to the power input jack.
2 Insert the 12 V DC car cord cigarette lighter plug into the cigarette lighter
socket of the vehicle. The red power indicator turns on.
Mounting the battery into the charger
For use with Lithium-Ion (Li-ion) batteries
Warning:
charge Nickel Cadmium (Ni-Cd) or Nickel Metal Hydride (Ni-MH) batteries.
To mount the battery into the charger:
1 Note where the guides and contacts are located on the battery and align
them with the corresponding guides and contacts on the charger, then slide
the battery into place in the charging bay.
2 Press the battery down, then slide it up (away from the indicator lights).

Using the charger

. attempt to
only Do not