Dynex DX-IPAC2 User Manual

After eight hours, the circuit protection turns off power to prevent
damage from overcharging and the LED turns off.
2 If your device needs more recharging after eight hours, unplug the
charger from the outlet, then plug it back in. The circuit protection
resets and provides power for another eight hours. If the charger' s
circuit protection doesn't reset after eight hours, contact Dynex for
technical service.
Warning: The charger won't reset if you only unplug the cables from the
charger. To reset the charging cycle, remove the AC adapter from the main
socket, then re-insert.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Dynex DX-IPAC2 Wall Charger
Power your iPod® and other MP3 players in your home with this
charger and attached 30-pin USB cable or USB cable.
Contents include one wall charger, one iPod 30-pin to USB sync cable,
and one Creative Zen to USB sync cable (for charging only).
Features
• Plug the wall charger into a power outlet for easy, convenient
charging.
• Works with any MP3, mobile phone, or PDA that has a USB 5V
interface.
• LED indicator turns green when it' s plugged into the wall and
Chargeur pour prise secteur DX-IPAC2 de Dynex
Alimentez votre iPod® et autres lecteurs de MP3 dans votre voiture
avec ce chargeur et son câble USB 30 broches joint ou un autre câble
USB.
Le contenu inclut un chargeur mural, un câble de synchronisation 30
broches vers USB pour l'iPod et un câble de synchronisation vers USB
pour le Creative Zen (uniquement pour charger).
• Branchez le chargeur sur une prise secteur pour une recharge
facile et commode.
• Peut être utilisé avec tout lecteur de MP3, téléphone cellulaire ou
ANP doté d'une interface USB 5 V.
turns red when it' s charging. The LED will switch off when the
charger has completed its eight-hour cycle.
• The Smart Power Circuit Protection offers true Circuit Protection
Security by automatically shutting off circuitry after eight hours of
charging. This is to shield against unwanted charging after the
device has been charged for more than eight hours. To reset and
begin charging again, simply unplug the wall charger, plug it back
in, and the eight- hour charging mode begins.
To charge your iPod or other USB 5V device:
1 Plug the wall charger into a power outlet and connect to your
device. The device will start charging and the LED will turn red.
AC Charger
Chargeur CA
Cargador de CA
Fonctionnalités
DX-IPAC2
USER GUIDE I GUIDE DE L'UTILISATEUR I GUÍA DEL USUARIO