Subscribe to Our Youtube Channel
Related Manuals for iPort 72380
Summary of Contents for iPort 72380
- Page 1 CONNECT C AS E 72380 - CONNECT CASE mini A17 72381 - CONNECT CASE Air 11 in (M2) 72382 - CONNECT CASE Air 13 in (M2) 72383 - CONNECT CASE 10.2 72396 - CONNECT CASE 10.9...
- Page 2 Bottom. • Case Top - The short removable portion of the chase including the locking portion of the Case. • IPORT Security Tool - The orange handled 1.5mm hex tool used for locking and unlocking IPORT Products. • Station Interface Module - The main electronics...
- Page 3 CONNECT C AS E 1. Remove Case from the box and place on a table. Remove the short Case Top.
- Page 4 CONNECT C AS E Slide iPad into the Case making sure the Lightning or USB-C connection is snugly inserted into the iPad.
- Page 5 CONNECT C AS E Reinstall the Case top onto the lower half if the Case and iPad.
- Page 6 CONNECT C AS E Use the provided IPORT tool, insert the tool into the top of the case and slide the tool towards the lock position icon.
- Page 7 CONNECT C AS E • For added security rotate the IPORT tool clockwise to tighten the setscrew in place holding the lock secure.
- Page 8 CONNECT C AS E Place the IPORT CONNECT Case onto a Dock or MultiDock to initiate charging.
- Page 9 CONNECT C AS E Hand Strap Install - (sold separate) 1. Insert the metal strap loops with the flat end pointing towards the left or right side of the case.
- Page 10 CONNECT C AS E Rotate the strap clip towards the bottom of the Case and insert into the hole until the strap clip snaps into place.
- Page 11 CONNECT C AS E Repeat for the second clip. Insert the IPORT CONNECT Hand Strap under both strap loops with the Velcro facing out from the case, fold over the Hand Strap and attach to the Velcro. Adjust hand strap to a snug but comfortable fit around the top of your hand.
- Page 12 CONNECT C AS E Hand Strap Removal 1. Unlock the CONNECT Case Top from the Case Bottom. See step 5 of installing the Case. Remove the Case Top from the Case Bottom.
- Page 13 C AS E On the inside of the Case Top, locate the small oval hole and insert the IPORT CONNECT Security tool. Pivot the IPORT Security tool toward the top of the Case Top freeing the Strap loop. Rotate the Strap loop 90 degrees left or right to remove the Strap Loop from the Case Top.
Need help?
Do you have a question about the 72380 and is the answer not in the manual?
Questions and answers