Advertisement
Quick Links
C AS E
72300 - iPad (9th gen) - Black
72301 - iPad (9th gen) - White
72329 - mini (A17) - Black
72330 - mini (A17) - White
72324 - iPad Air 11 in (M2) - Black
72325 - iPad Air 11 in (M2) - White
72326 - iPad Air 13 in (M2) - Black
72327 - iPad Air 13 in (M2) - White
72340 - iPad 10 gen - Black
72341 - iPad 10 gen - White
03-11-25
CONNECT
PRO
1
Advertisement
Related Manuals for iPort CONNECT PRO 72326
Summary of Contents for iPort CONNECT PRO 72326
- Page 1 CONNECT C AS E 72300 - iPad (9th gen) - Black 72301 - iPad (9th gen) - White 72329 - mini (A17) - Black 72330 - mini (A17) - White 72324 - iPad Air 11 in (M2) - Black 72325 - iPad Air 11 in (M2) - White 72326 - iPad Air 13 in (M2) - Black 72327 - iPad Air 13 in (M2) - White 72340 - iPad 10 gen - Black...
- Page 2 The fully assembled CONNECT PRO Case. • Case Top - The short removable portion of the chase including the locking portion of the Case. • IPORT Security Tool - The orange handled 1.5mm hex tool used for locking and unlocking IPORT Products.
- Page 3 CONNECT C AS E 1. Remove Case from the box and place on a table. Remove the short Case Top. 03-11-25...
- Page 4 CONNECT C AS E Slide iPad into the Case making sure the Lightning or USB-C connection is snugly inserted into the iPad. 03-11-25...
- Page 5 CONNECT C AS E Reinstall the Case top onto the lower half if the Case and iPad. 03-11-25...
- Page 6 CONNECT C AS E Use the provided IPORT tool, insert the tool into the top of the case and slide the tool towards the lock position icon. 03-11-25...
- Page 7 CONNECT C AS E • For added security rotate the IPORT tool clockwise to tighten the setscrew in place holding the lock secure. 03-11-25...
- Page 8 CONNECT C AS E Place the IPORT CONNECT Pro Case onto a BaseStation or WallStation for charing. 03-11-25...
- Page 9 CONNECT C AS E Hand Strap Install - (sold separate) 1. Insert the metal strap loops with the flat end pointing towards the left or right side of the case. 03-11-25...
- Page 10 CONNECT C AS E Rotate the strap clip towards the bottom of the Case and insert into the hole until the strap clip snaps into place. 03-11-25...
- Page 11 CONNECT C AS E Repeat for the second clip. Insert the IPORT CONNECT Hand Strap under both strap loops with the Velcro facing out from the case, fold over the Hand Strap and attach to the Velcro. Adjust hand strap to a snug but comfortable fit around the top of your hand.
- Page 12 CONNECT C AS E Hand Strap Removal 1. Unlock the CONNECT PRO Case Top from the Case Bottom. See step 5 of installing the Case. Remove the Case Top from the Case Bottom. 03-11-25...
- Page 13 C AS E On the inside of the Case Top, locate the small oval hole and insert the IPORT CONNECT Security tool. Pivot the IPORT Security tool toward the top of the Case Top freeing the Strap loop. Rotate the Strap loop 90 degrees left or right to remove the Strap Loop from the Case Top.
-
Page 14: Regulatory And Safety Information
IMPORTANT SAFETY INSTRUCTIONS You should always follow these basic safety precautions when using your IPORT products to reduce the risk of fire, electric shock, and injury to persons. 1. Read all the safety and operating instructions before operating your IPORT product.
Need help?
Do you have a question about the CONNECT PRO 72326 and is the answer not in the manual?
Questions and answers