answering system operation
remote access
You can access many features of your answerng system remotely from any touch tone telephone.
A four-digit security code is required to access the system and the factory default code is 0000; see
page 30 to change t. To enter remote access:
• Dal your telephone number from any touch tone telephone.
• When the system answers and plays the outgong announcement, press
remote access code.
• After you enter the remote access code, the system wll play any new messages and then play
the menu of commands.
remote access commands:
0
To end the call
1
To play all messages
2
To play new messages
3
To delete the message
33
To delete all old messages
4
To repeat the prevous message
5
To stop playng the message
6
To skp the message
7
To turn the answerng system on
8
To turn the answerng system off
9
To repeat help
www.vtechphones.com
•
*
followed by the
Durng remote
access, f no key
s pressed wthn
eght seconds,
the remote
access call s
automatcally
dsconnected.
33