Page 1
10KG/6KG FRONT LOAD WASHING/DRYER MACHINE SC-1060AU10FLC INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Appliance. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING...
GENERAL SAFETY INSTRUCTIONS (Cont.) To reduce risk of fire, electric shock or injury, always follow these basic precautions and accident prevention measures when using this appliance, including the below: NOTE: This appliance should be installed by an authorized technician else warranty will be void.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children. •...
Page 7
GENERAL SAFETY INSTRUCTIONS (Cont.) • Only load items that are suitable for the appliance. • Do not place any open source flames on the appliance such as candles, etc.. • The door/window will be hot after a long cycle, be sure not to touch the window and to keep children away from the appliance.
Page 8
GENERAL SAFETY INSTRUCTIONS (Cont.) CAUTION ITEMS BELOW ARE NOT SUITABLE FOR DRYING. IT CAN CAUSE FIRE IN THE APPLIANCE OR EXTENSIVE DAMAGE. DO NOT PLACE FOLLOWING IN THE APPLIANCE • Items containing rubber or foam like rubber or any other similar textured materials.
Page 9
GENERAL SAFETY INSTRUCTIONS (Cont.) Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the appliance.
PRODUCT OVERVIEW (Cont.) CONTROL PANEL START/PAUSE: Press this button to start or pause the washing cycle. The door can not be opened when the machine starts. You can press this button for 3 seconds to pause wash cycle and add clothes, but if the water level or the temperature of the drum is high, the door will not open.
Page 13
OPERATION (Cont.) Note: • When washing cycle is finished, the machine will change into standby mode. And the power will be off after 10 minutes without any control on the control panel. • The machine is fitted with balance control device, which ensures the machine is stable during the spin.
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order.
Page 15
GETTING STARTED (Cont.) LEVELING THE APPLIANCE IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate leveling of the appliance. This is a must if your floor in unbalanced to level the washing machine. •...
Page 16
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. • Connect the inlet pipe as indicated, there are two steps of connecting the inlet pipe.
Page 17
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE • Do not kink or protract the drain hose. Position the drain hose correctly other wise damage will result in water leakage. • Do not bend the drain hose or place it under the washing machine. •...
INSTRUCTIONS BEFORE FIRST USE • Make sure the washing machine is completely level as to previous instructions on how to level your washing machine. • Make sure the water inlet hose is installed correctly. • Make sure that the washing machine is plugged into the power socket. •...
Page 19
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAWER HOUSING Use a bottle brush to remove detergent residues inside the drawer housing. CLEANING THE WATER INLET FILTER Use pointed nose pliers to withdraw the plastic filter. Clean, put back and secure. These filter should be checked every 6 months or so, or more often if there are frequent interruptions to the water supply.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAIN PUMP FILTER 1. Disconnect the machine from the mains electricity supply and open the lower cover with a screwdriver. 2. Place a container under the pump. Unscrew and remove the filter. 3. Clean the filter carefully.
SPECIFICATIONS Power Supply 220-240V ~ 50Hz Standard Water Pressure 0.02MPa~0.8MPa Washing/Dry Capacity 10KG / 6KG Rated Power 2000W Dimensions 595 x 665 x 845 mm (W x D x H) Net: 69 kg Weight Gross: 73 kg...
Need help?
Do you have a question about the SC-1060AU10FLC and is the answer not in the manual?
Questions and answers