Download Print this page

Clair de Lune CL6588 Instructions Manual

Folding crib

Advertisement

Quick Links

Shentonfield Road
Manchester M22 4RW
0161 491 9800
IMPORTANT - PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
IN ORDER THAT THE STAND YOU HAVE PURCHASED MAY BE SAFELY USED THE FOLLOWING INSTRUCTIONS
MUST BE FOLLOWED. WARNING: KEEP THE PLASTIC BAG AWAY FROM CHILDREN TO AVOID SUFFOCATION.
WARNING: Do not use this product without reading the
instructions for use first.
WARNING: Stop using the product as soon as the child
can sit or kneel or pull itself up.
WARNING: Placing additional items in the product may
cause suffocation.
WARNING: Do not place the product close to another
product, which could present a danger of suffocation
or strangulation, e.g. strings, blinds/curtains cords, etc.
WARNING: Only use the mattress sold with this crib, do
not add a second mattress on this one.
WARNING: To avoid hazards from the child's neck being
caught on the top rail on the side that is next to the
adult bed, the top rail must not be higher than the adult
bed mattress.
Only use on a firm horizontal floor.
Young children should not be allowed to play
unsupervised in the vicinity of the crib.
The crib should be locked in the fixed position when the
child is left unattended.
Dispose of all packaging safely before use. Complies with BS EN 1130:2019
0 1 6 1 4 9 1 9 8 0 0
All assembly fittings should always be tightened
properly and securely and that care should be taken
that no screws are loose, because a child could trap
parts of the body or clothing e.g. strings, necklaces,
ribbons for babies' dummies etc, which would pose a
risk of strangulation.
The mattress size should be 73 x 35cm.
The thickness of the mattress chosen should be such
that the internal vertical height (surface of the top of
the mattress to the lower edge of the bed sides) is at
least 200mm in the highest set position of the bed
base.
Be aware of the risk of burning cigarettes, open fires
and other sources of strong heat, such as electric bar
fires, gas fires, etc, in the near vicinity of the crib.
The crib and stand can be wiped/sponged clean
and fabric can be removed from the crib and
washed according to the care label.
DO NOT use crib if any parts are missing, damaged, or
broken. Contact Clair de Lune for replacement parts
and instructional literature if needed.
DO NOT substitute parts.
C U S T O M E R S E R V I C E S @ C L A I R - D E - L U N E . C O . U K
FOLDING CRIB
I n s t r u c t i o n s
03.2024 V6

Advertisement

loading
Need help?

Need help?

Do you have a question about the CL6588 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clair de Lune CL6588

  • Page 1 DO NOT use crib if any parts are missing, damaged, or unsupervised in the vicinity of the crib. broken. Contact Clair de Lune for replacement parts and instructional literature if needed. The crib should be locked in the fixed position when the child is left unattended.
  • Page 2 FOLDING CRIB I n s t r u c t i o n s Tools Required Cross head screwdriver Allen key (not included) (included) Please assemble with a hand held screwdriver and not a cordless drill as this can lead to over tightening of the screws.
  • Page 3 FOLDING CRIB I n s t r u c t i o n s Step 1 Attach Short Cross Bars A to Legs C and D as shown using 4 x Barrel Nuts and 4 x Large Bolts. Ensure that the screw inserts are facing outwards. Large Bolt Large Bolt Leg C...
  • Page 4 FOLDING CRIB I n s t r u c t i o n s Step 3 Position assembled section 1 inside assembled section 2 creating an ‘X’ shape. Ensure that the angled end of each leg sits flat on the floor. Line up the central (upper) holes in the legs and use 2 x Short Bolts and 2 x Washers to secure.
  • Page 5 FOLDING CRIB I n s t r u c t i o n s Step 5 Place the fabric basket centrally within the product assembly and wrap the zipped flaps over the top of each cross bar and close the zip underneath. Repeat at each end wrapping the flaps over the cross bars and fabric brace straps, closing the zip underneath.
  • Page 6 FOLDING CRIB I n s t r u c t i o n s Step 6 Insert Base Panel G into the bottom of the basket, followed by the mattress. The product can be folded for storage and transport simply by removing the Locking Bolts at each end and closing the legs together, the basket will fold at the same time, there is no need to dismantle the product.