Clair de Lune Deluxe Rocking Stand Manual

IMPORTANT: Please read before assembling

In the unlikeley event that you should nd any component missing from your stand please call our helpline and

replacements will be forwarded by return.

Never assemble or use a stand with missing or broken parts.

Ensure that your stand is always secure and tighten all screws full, but do not over tighten as this can make it insecure.

Please assemble with a hand held screwdriver and not a cordless drill as this can lead to over tightening of the screws.

Before rst use of the rocking stnad please check to ensure that all screws are tightened securely.

It is important that the stand is checked regularly during continued use to ensure that all the screws remain secure.

Tools

Requ

Deluxe Rocking Stand

02.2020 V2

Table of Contents

Need help?

Do you have a question about the Deluxe Rocking Stand and is the answer not in the manual?

Page 1 Deluxe Rocking Stand IMPORTANT: Please read before assembling In the unlikeley event that you should nd any component missing from your stand please call our helpline and replacements will be forwarded by return. Never assemble or use a stand with missing or broken parts.
Page 2 Dispose of all packaging safely before use. Complies with BS EN 1466: 2014 Only use replacement parts supplied or approved by the manufacturer Clair de Lune, Shenton eld Road, Sharston Industrial Estate Wythenshawe, Manchester M22 4RW - 0161 491 9800 / sales@clair-de-lune.co.uk...
Page 3 Note: the uprights A and B should curve inwards towards each other with the larger recessed dowel holes facing the same way. 1. Using 4 x 50mm screws, fasten 1 x A and 1 x B uprights to 1 x base rocker C through the holes in the base of C.
Page 4 Important: Stabilisers Align the holes in the flexible straps G with the gold star- must be in locked shaped fittings on the inside of the uprights A/B on both position when stand is sides. Secure using 4 x 12mm screws. unattended.

Rocking stand