Doss E-go III Quick Start Manual page 2

EN
1. Packing content
1 x E-go III
●
1 x USB-C charging cable
●
1 x User manual
●
2. Specifications
Output power: 8W
Input: DC 5V
Battery: 3.7V
Charge time: ~ 2.5hrs
Playtime: up to 22hrs (75% volume @ pink noise)
Bluetooth range: up to 20m/66ft
Net weight: 255g/0.56lbs
Unit dimension: 9.7*5.1*9.7cm/3.8*2.0*3.8 inches
TF card audio format: MP3/WAV (Max capacity 128G)
3. Important notes before using
To prolong the lifetime of the battery, fully charge the speaker before using it for
●
the first time.
TWS feature is only available under Bluetooth mode.
●
Press the volume button "+ - " simultaneously to check the version ID.
●
The speaker will auto-power off after 15 minutes without audio input.
●
If you need any assistance while using this speaker, please feel free to contact
●
customer service at support@dossav.com.
4. Buttons and control
Press and hold 2s
Press and hold 3s
Press
Press twice
Press and hold 2s
Press
Press and hold 2s
Press
Press and hold 3s
Press
5. LED indications
6. Bluetooth mode
Enable the Bluetooth feature on your device.
1.
Find "E-go III" on the Bluetooth device and connect it
2.
7. TWS (True Wireless Stereo) mode
Press twice on both E-go III to enter into TWS pairing.
1.
Once paired, the LED of the primary speaker turns solid blue, while the
2.
second speaker turns flashing blue.
Find "E-go III" on your Bluetooth device and connect it.
3.
8. Use your speaker with Echo Dot
You can connect the Dot with the speaker by Bluetooth.
Please follow the steps to set up via Bluetooth:
Download the Alexa app and follow the steps to set up the procedure to get
1.
the Dot connected to your home Wi-Fi network.
Switch the E-go III to Bluetooth mode, you can press the Play/pause button to
2.
re-enter Bluetooth pairing.
Run the Alexa app, tap Menu, and then tap Settings.
3.
Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
4.
The E-go III Pro should appear in the list of Bluetooth devices. If not, please
5.
press the power button and try again.
Once listed, tap on the speaker to complete the pairing process.
6.
To remove the device, return to Bluetooth＞tap the name of the speaker＞
7.
tap "Forget Device"
Note:
Voice command will not be able to turn on/off the speaker, it can only translate
the sound signal.
9. Safety instructions
Avoid dropping or hitting the speaker.
Avoid exposing to extreme temperature.
Avoid using the speaker near a microwave.
Never disassemble or repair the speaker.
Never use any corrosive cleanser/oil to clean.
Never leave the speaker in a car parked in the sun.
Never attempt to charge the speaker while it is wet.
1A
1400mAh
Flashing blue
Solid blue
Solid red
Solid red
Off
Rapidly flashing blue
Turn on/off
Reject a call
Answer/end a call
Enter/exit TWS pairing
Next track
Volume up
Previous track
Volume down
Disconnect Bluetooth
Check version ID
Bluetooth pairing
Bluetooth paired
TF card mode
Charging
Fully charged
TWS pairing