Related Manuals for STLab N-1180
Summary of Contents for STLab N-1180
- Page 1 Port 200G QSFP56 Network Adapter for OCP 3.0 User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners.
-
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............3 1.2 Features................... 4 1.3 System Requirements ............5 1.4 Product Diagram ..............5 1.5 Package Contents ..............5 Chapter 2: Getting Started ............6 2.1 Hardware Layout..............6 2.2 Hardware Installation ............7 2.3 Driver Installation .............. -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction The N-1180 Broadcom 1-Port 200G QSFP56 OCP 3.0 Network Adapter —built on Broadcom’s BCM57508 controller —enables highly-scalable, feature-rich networking solutions in servers. It caters to enterprise and cloud-scale applications, including high-performance computing, telco, machine learning, storage disaggregation, and data analytics. -
Page 4: Features
1.2 Features OCP 3.0 Form Factor PCIe Gen4 x16 host interface Compliant with OCP NIC 3.0 specification TruFlow™ engine for intelligent flow processing to increase server VM density and accelerate vSwitch processing Industry’s most secure OCP 3.0 adapter solution leveraging Broadcom’s BroadSAFE®... -
Page 5: System Requirements
1.3 System Requirements Windows® Sever 2019/2022/2025 Linux kernel versions 2.6 or newer VMware ESXi 7.0 or above FreeBSD Airflow Requirements: Tier 8, 400 LFM at 55℃ 1.4 Product Diagram 1.5 Package Contents 1 x 1-Port 200G QSFP56 OCP 3.0 Network Adapter ... -
Page 6: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Hardware Layout LED Indicator: Description Indicates Link Speed: • Green = 200 Gb/s; Amber = 100/50/25Gb/s Link / Speed LED • Not illuminated=No link Indicates Network Card Activity: • Blinking = Active Activity LED • Off= No activity Page 6 MN5000000128... -
Page 7: Hardware Installation
The following section shows you how to install 1-Port 200G QSFP56 OCP 3.0 Network Adapter driver on different operating systems. 2. 3 .1 Installation for Windows Go to URL http://www.sunrichtech.com.hk/ Search N-1180, download the driver. Follow the on-screen instructions to finish installing the driver. Page 7 MN5000000128... -
Page 8: Installation For Linux
2. 3 .2 Installation for Linux Go to URL http://www.sunrichtech.com.hk/ Search N-1180, download the driver. Follow Readme.txt which is in the driver folder to finish installing the driver. 2.4 Hardware Verify 2. 4 .1 Verifying for Windows Click on the “Device Manager” tab in the Windows Control Panel. -
Page 9: Verifying For Linux
Expand “Network adapters” item, and you can read “Broadcom NetXtreme E-Series Single-port 200Gb OCP 3.0 Ethernet Adapter” in the Device Manager. 2. 4 .2 Verifying for Linux You can check whether the driver is loading by using followingcommands: # lsmod | grep bnxt_en # ifconfig –a If there is a device name, ethX, shown on the monitor, the linux driver is load.
Need help?
Do you have a question about the N-1180 and is the answer not in the manual?
Questions and answers