Chapter 1: Introduction 1.1 Product Introduction The OCP 3.0 M.2 NVMe SSD Adapter is a high-performance solution designed to boost your storage capabilities. It enables the connection of an M.2 NVMe SSD to your system via an OCP 3.0 slot, offering ultra- fast data transfer speeds up to 64GT/s per drive.
Supports PCIe Gen4 x4 (Type M) 2280/2260/2242/2230 M.2 form factor NVMe SSD modules Supports PCIe bifurcation for dual SSD operation 1.3 Systems Requirements Operating systems supported are (64 bits) Windows Server OS Linux OS 1.4 Product Diagram 1.5 Package Contents MN2000000251 Page 4...
1 x A-650 OCP 3.0 M.2 NVMe SSD Adapter 1 x User Manual Chapter 2: Getting Started 2.1 Hard Drive Installation Follow the steps to install NVMe M.2 SSD. 2.1.1 Install the M.2 SSD to the A-650 adapter: Check your SSD size is M.2 2280/2260/2242/2230.
Page 6
M.2 SSD 2.1.2 Add M.2 SSD to A-650 Adapter Card a. Place the screwed brass post (1). b. Insert the M.2 SSD into the slot, make sure the connector is fully inserted. MN2000000251 Page 6...
Page 7
Secure the M.2 SSD with screws. MN2000000251 Page 7...
Page 8
Finish. 2.1.3 Install the A-650 into the OCP 3.0 slot of your Server and lock it with the fixing screws. a. Insert the A-650 adapter into the slot on the server as shown in the illustration. b. Tighten the thumbscrews to secure the adapter.
Need help?
Do you have a question about the A-650 and is the answer not in the manual?
Questions and answers