Connection Diagram Short press " Link" button 1 time for Output: 100-240V remote linking. Long press "Link" button 3 seconds for Triac dimming LED light Zigbee pairing while indicator flashes Tradi�onal filament lamp quickly. Short press " Min. Set" button for mini Halogen lamp Input: 100-240V brightness.
Page 3
Various control solu�on: Philips MiBoxer IKEA 2.4GHz Amazon Zigbee Gateway TRÅDFRI Remote Echo Plus Compa�ble with these 2.4G RF remote controls (Purchased separately) B1 / B1-B / T1 B2 / T2 K1 / K1-B WL-Box1 Auto transmi�ng (2.4G RF remote signal) can transmit remote signal to another automa�cally while controller...
Page 4
2.4G RF Remote control instruc�on Linking Code Instruc�ons Triac Power Dimmer Triac Link / Unlink Power Dimmer bu�on Link Power off 10 seconds and Short press " I " bu�on Lights blink 3 �mes power on again or short 3 �mes within 3 seconds. slowly means linking press "Link"...
Page 5
Smartphone APP control instruc�on Added Zigbee 3.0 gateway into “Tuya Smart” App (please review instruc�on of Zigbee 3.0 gateway) 1). Connect with power supply. 2). Pairing network (a�en�on: factory default is pairing network). Way one: Turn off and turn on light 6 �mes or over 6 �mes con�nuously, the light is in breathing status. Way two: Long press "...
Page 6
Philips Hue control instruc�on Added “Philips Hue” into APP 1). Connect with power supply 2). Pairing network (a�en�on: factory default is pairing network) Way one: Turn off and turn on light 6 �mes or over 6 �mes con�nuously, the light is in breathing status. Way two: Long press "...
Page 7
Alexa voice control instruc�on 1). Alexa control (Audio support Zigbee 3.0 protocol) You can connect directly if your Amazon ECHO already is built-in zigbee 3.0 protocol, following model with zigbee 3.0 protocol: Amazon ECHO Plus ( 2nd Gen), ECHO (4th Gen), ECHO Studio, ECHO Show (2. Gen) 1).
Page 8
Google Home voice control instruc�on Please add device into MiBoxer Zigbee 3.0 gateway and start following steps 1). Open Google Home App 2). Click “+” on the top of le� corner 3). Click “Set up device” 4). Click “Works with Google” 5).
Page 9
A�en�on 1. Please turn off power supply before installa�on. 2. Please ensure input voltage to be same as requirements from device. 3. Don’t disassemble device if you are not expert, otherwise it will damage it. 4. Please do not use the light in the place with widely range metal area or strong electromagne�c wave nearby, otherwise, the remote distance will be seriously affected.
Need help?
Do you have a question about the MiBOXER TRI-C1ZR and is the answer not in the manual?
Questions and answers