Download Print this page

NewLine DV One+ 163 Mobile Cart Installation Manual

Advertisement

Quick Links

DV One+ 163" Mobile Cart Installation Manual
Model: DV One+ 163" Mobile Cart
To use the product safely and correctly, please read this
   
manual carefully before installation.
This product is suitable for the DV One+ 163" display.
22

Advertisement

loading
Need help?

Need help?

Do you have a question about the DV One+ 163 Mobile Cart and is the answer not in the manual?

Questions and answers

Summary of Contents for NewLine DV One+ 163 Mobile Cart

  • Page 1 DV One+ 163" Mobile Cart Installation Manual Model: DV One+ 163" Mobile Cart To use the product safely and correctly, please read this     manual carefully before installation. This product is suitable for the DV One+ 163" display.
  • Page 2: Main Parts

    Main Parts: C-Crossbeam 3pcs D - Middle vertical bar 1pc A-left column B-right column E-beam connecting piece G-4 inch wheels F-Aluminum corner 4pcs 2pcs code 16pcs Bracket assembly screw package: a-M8*20 cross Cross wrench Adjustable wrench hexagonal screws (self provided) (Self provided) 84pcs LED all-in-one machine screw package:...
  • Page 3 Step 1 : Adjust the wheels to the braking position and use screw (a) to lock the wheels onto the left and right pillars. (As shown in Figure 1). Before installing the wheel, adjust it to the brake state. column x2 Figure 1 Step 2 : Select the appropriate installation method based on the...
  • Page 4 2.1.2 Assemble the pre assembled crossbeam and left and right columns according to the diagram, paying attention to the direction of the upper and lower crossbeams, and use screws (a) to lock and fix them. (as shown in Figure 3). Figure 3 Installation of crossbeam at non highest position: 2.2.1 Take out the aluminum corner code, install it in combination with...
  • Page 5 2.2.2 Assemble the pre assembled crossbeam with the left and right columns, and lock them with screws (a). (As shown in Figure 5) Figure 5 Step 3 : Install aluminum corner brackets at the bottom and top of the middle vertical bar, and lock them with screws (a) for backup.
  • Page 6 Step 4: Then assemble the pre assembled middle vertical bar with the crossbeam and use screws (a) Lock it tightly. Step 5: Install the crossbeam fixing plate onto the crossbeam using fasteners as shown. After installation, check all screws to prevent them from loosening.