#
The accessory handset won't work until you register it to a base!
This handset is designed for use with Uniden's DECT3380
Compatible Bases
base. Other Uniden DECT6.0 bases might be compatible with
this handset. For the most up-to-date list of which bases this
handset is compatible with, see our website.
There are two different registration methods, but it's easy to
Registration Methods
figure out which one applies to your handset and base. Answer
the question to register the handset to one of the compatible
bases.
Does the handset fit in the base cradle?
Yes Place the handset in the base. The display should say Handset
Registering.
No 1. On the base, press and hold FIND when the phone is in standby
(about 5 seconds).
2. On the handset, press and hold POUND (#) until the handset
display says Handset Registering (about 2 seconds).
#
After about 30 seconds, the handset display should say
Registration Complete.
Pick up the handset and press TALK/FLASH . Make sure you
Test the connection
get a dial tone. (Press END to hang up.)
If...
- you don't hear a dial tone
- the display says Registration Failed
Registering to a Base
Try...
Making sure the handset is fully
charged, then trying again.
3