Iget HOME GUARD HGNVK-109104 Quick Start Manual

Helpdesk / technical support enforcer wireless cctv kit

Advertisement

Quick Links

Helpdesk / Technical Support
www.iget.eu/cs/helpdesk-centrum-cs
https://helpdesk.intelek.cz/
Made in China
Enforcer Wireless CCTV Kit
Quick Start Guide - EN
HGNVK-109104 / 109108

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOME GUARD HGNVK-109104 and is the answer not in the manual?

Questions and answers

Summary of Contents for Iget HOME GUARD HGNVK-109104

  • Page 1 Enforcer Wireless CCTV Kit Helpdesk / Technical Support www.iget.eu/cs/helpdesk-centrum-cs https://helpdesk.intelek.cz/ Quick Start Guide - EN Made in China HGNVK-109104 / 109108...
  • Page 2 IMPORTANT SAFEGUARD RoHS All lead-free products offered by the company comply with the requirements of the European law of the Restriction of Hazardous Substances (RoHS) directive, which means our manufacturing conform processes and products are strictly “lead-free” and without the hazardous substances cited in the directive.
  • Page 3: Table Of Contents

    CONTENTS Package Contents Package Contents Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. Parts & Description •...
  • Page 4: Parts & Description

    Parts & Description Record video The system may not include hard disk depending on the kit you selected. The NVR works with most Antenna 3.5” SATA HDD. Weatherproof IP66 Steps to install a hard drive (if your system has pre installed HDD, please skip this step) High-powered Sensor Spotlights 120°...
  • Page 5: Initial Setup

    Initial Setup Setting Up the NVR Use the included power adapter to connect the camera to a nearby outlet. Next, you must set up the NVR and connect it to your network. Depending on the monitor port, connect the HDMI or VGA cable from your monitor to the HDMI or VGA Port on the rear panel.
  • Page 6: Connecting With Homeguardlink

    Connecting with Homeguardlink Red&Blue Flashing Light For the best experience, download the Homeguardlink app for your smartphone by scanning On the Homeguardlink APP, tap Setting the QR code below or searching for Homeguardlink in the App Store or Google play. go into Motion Detection Alert.
  • Page 7: Installing The Cameras

    Installing the Cameras Plan Your Installation When planning your installation, keep the following pointers in mind: Follow the instructions below to secure the cameras. It is recommended that you refer to the “Installation Tips” section to help you select good mounting locations. Distance: The further the camera is from the Wireless NVR or monitor, the higher the chances of signal degradation.
  • Page 8: Pairing The Camera

    Pairing the Camera Troubleshooting Your cameras should be paired to the wireless NVR and ready to use out of the package. If a camera Problem Possible Causes Solutions becomes unpaired, or if you have purchased a wireless add-on camera (max. 10 cameras per system), follow the instructions below.
  • Page 9: Warranty And Support

    B. Equipment failure caused by not conforming to the using environment C. No warranty card D. Warranty expired Product model: Product serial number: Purchase date: User name: Contact person: Telephone: Note: Please keep the warranty card for the better service. For technical support, please contact us www.iget.eu/cs/helpdesk-centrum-cs https://helpdesk.intelek.cz/...

This manual is also suitable for:

Home guard hgnvk-109108

Table of Contents