rgs Regency MTBF28BK Assembly Instructions

Missing Parts? Assembly Questions?
Call us at 1-866-816-3822 or email help@regencyof.com for immediate assistance.
ASSEMBLY INSTRUCTIONS
Hardware :
A: Screws(24)
Hardware:
Hardware :
A: Screws
A: Screws(24)
A
A
Parts :
B: Legs(4)
B
Parts :
QTY: 24
B: Legs(4)
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surface with desired table finish face down. Position
assembled legs as shown in Figure A.
B
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
Tools Needed:
Phillips Screwdriver
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surfa
assembled legs as shown in Figure A.
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Keep all hardware parts and packaging out of reach of children.
Two person assembly recommended.
IMPORTANT NOTICE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
MTBP27
You will need a Phillips Head Screw Driver and
·
Hardware :
MTBP27 Kee Post Table Legs INSTRUCTIONS
A: Screws(24)
You will need 2 people for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
A
Parts:
B: Legs (4)
Parts :
B: Legs(4)
B
C: Table Top (may vary)
C
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surface with desired table finish face down.
assembled legs as shown in Figure A.
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
Tape Measure
C
IMPORTANT NOTICE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples & packing straps before you start to assemble.
• Keep all hardware parts and packaging out of reach of children.
Kee Post Folding Table Leg (Set of 4)- Black
Otto Post Folding Table Leg (Set of 4)- Black
·
Kee Post Table Legs
You will need 2 people for th
·
MTBP27 Kee Post Table Legs INSTRUCTIONS
You will need 2 people for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
C: Table Top*
C: Table Top (may vary)
C
C: Table Top (may vary)
*Shape May Vary
C
C
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure A
MTBF28BK
OT-TBF28BK
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure A