rgs MABP27BK Assembly Instructions

Missing Parts? Assembly Questions?
Call us at 1-866-816-3822 or email help@regencyof.com for immediate assistance.
ASSEMBLY INSTRUCTIONS
MTBP27
Hardware :
A: Screws(24)
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
·
A
Hardware :
MTBP27 Kee Post Table Legs INSTRUCTIONS
Hardware :
You will need 2 people for this assembly.
A: Screws(24)
Hardware:
Parts :
will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
A: Screws(24)
A
B: Legs(4)
A: Screws
B
Parts :
A
B: Legs(4)
B
C: Table Top (may vary)
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surface with desired table finish face down. Position
assembled legs as shown in Figure A.
C
Parts :
QTY: 28
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surface with desired table finish face down. Position
B: Legs(4)
assembled legs as shown in Figure A.
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
Table Top): Place Table Top(C) on a clean flat surface with desired table finish face down. Position
s shown in Figure A.
B
STEP 1 (Square Table Top):
mbled Legs to Table Top using 6 Screws(A) per Leg.
Place Table Top (C) on a clean flat surface with desired
table finish face down.
Position Adjustable Legs (B) as shown in Figure A.
Then, attach assembled Legs to Table Top using
7 Screws (A) per Leg.
C
STEP 1 (Square Table Top): Place Table Top(C) on a clean flat surface with d
*NOTE: Place Legs at
least 1-inch away from
assembled legs as shown in Figure A.
Edge of Table*
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
IMPORTANT NOTICE:
IMPORTANT NOTICE: • Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
• Check to be sure that you have all parts and hardware.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts. • Remove all wrapping materials, including staples & packing straps before you start to assemble.
IMPORTANT NOTICE:
• Keep all hardware parts and packaging out of reach of children.
Check to be sure that you have all parts and hardware.
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
• Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
• Remove all wrapping materials, including staples & packing straps before you start to assemble.
E:
Keep all hardware parts and packaging out of reach of children.
• Keep all hardware parts and packaging out of reach of children.
ts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
Two person assembly recommended.
t you have all parts and hardware.
materials, including staples & packing straps before you start to assemble.
arts and packaging out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822 or email customerservice@regencyof.com
MTBP27
MTBP27
You will need 2 people for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
·
You will need a Phillips Head Screw Driver and a Tap
Kee Post Table Legs INSTRUCTIONS
You will need 2 people for this assembly.
Parts:
C: Table Top (may vary)
B: Adjustable Legs (4)
C
C: Table Top (may vary)
C
C
C
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure A
Any problems or questions call Regency Office Furniture at 1-866-816-9822 or email customerservice@regencyof.com
Hardware :
A: Screws(28)
·
Kee Post Table Legs INST
A
·
Kee Post Table Legs INSTRUCTIONS
You will need 2 people for this asse
Parts :
B: Adjustable Leg (4) • C: Table Top (may vary
B
C: Table Top*
D
STEP 1A (Square Table Top): Place Table Top(C) on
desired table finish face down. Position Adjustable Leg
C: Table Top (may vary)
Then, attach assembled Legs to Table Top using 7 Sc
*Shape May Vary
Figure A
C
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
*NOTE: Place Legs at
least 1-inch away from
Edge Table*
Figure A
Figure A
Kee Adjustable Leg, Black and Chrome (Set of 4)
Otto Adjustable Leg, Black and Chrome (Set of 4)
MABP27
You will need a Phillips Head Scre
Tools Needed:
D: Allen Wrench
Phillips Screwdriver
Tape Measure
C
MABP27BK
OTA-BP27BK
·
Kee Adjusta
You will need 2 pe
C
*NOT
least
Edge
Figure A