Table of Contents Pre-assembly Safety Information Assembly Warranty Care And Maintenance What is Covered What is Not Covered • Do not completely tighten screws until all screws are started.Tighten each bolt firmly and properly. • Some parts may contain sharp edges. Wear protective gloves as necessary. •...
Page 3
Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. assistance to assemble bulky or heavy items.
Page 4
Find a flat surface for the tent. Unpack the cartons and see if all the parts Now the arch elements are connected to each other by side struts 7, 8 and 9, pls Note that only struts 9 are used in the front segment. listed here are also available.
Page 5
Use P2 to go through the holes on the feet. Tighten the ratchet to fit the roof to the frame, and attached the N and Use the ground brackets and the ground nails to attach the scaffolding to the ground. N1 to the frame by R.
Page 6
• Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or other solvents on the textile or metal parts. • We recommend the use of furniture covers to protect the product when not in use. •...
Need help?
Do you have a question about the GA-126 and is the answer not in the manual?
Questions and answers