Table of Contents Pre-assembly Safety Information Assembly Warranty Warning What is Covered What is Not Covered • Do not completely tighten screws until all screws are started.Tighten each bolt rmly and properly. • Some parts may contain sharp edges. Wear protective gloves as necessary. •...
Page 3
Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. 6x300mm Peg 6x180mm peg SPIRAL MIDDLE NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture.
Page 4
Attach one end of the support poles (3) to the roof joints (5,6).Place roof on frame, and attach with bungee xings, take care not to over tension bungee, as this may cause dif culty correctly tting roof. Select an area of at ground for the tent. Unpack the carton and check all parts including tubes, tent and accessories…...
Page 5
• Take note that the tent needs to be handled carefully to avoid damage. • Do not force the frame, as there may be damage in the process. • Tents are meant as temporary shelter and must be evacuated under extreme weather conditions. •...
Need help?
Do you have a question about the GA106-BW and is the answer not in the manual?
Questions and answers