SW-Motech ADV.22.807.66000/B Mounting Instructions

Hide thumbs

page of 56

/ 56
Bookmarks

Quick Links

Download this manual

ANBAUANLEITUNG

mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio

ADV.22.807.66000/B

beinhaltet • contains • contient • contiene • contiene

KFT.22.807.30000/B

KFT.00.152.36000

GPT.22.807.19000/B

GPT.00.152.36200/B

HSK.00.745.11001/B

HSK.00.745.12000/B

LOC.00.745.10200

Need help?

Do you have a question about the ADV.22.807.66000/B and is the answer not in the manual?

Questions and answers

Summary of Contents for SW-Motech ADV.22.807.66000/B

Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio ADV.22.807.66000/B beinhaltet • contains • contient • contiene • contiene KFT.22.807.30000/B KFT.00.152.36000 GPT.22.807.19000/B GPT.00.152.36200/B HSK.00.745.11001/B HSK.00.745.12000/B LOC.00.745.10200...
Page 2 ~ 0.75 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 3 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 4 KFT.22.807.001.11 SC.ST.08.030.01.912.088 KFT.22.807.003L.11 KFT.22.807.003R.11 M6 x 20; DIN 6912 ø 6.4; DIN 125 SC.ST.06.020.02.6912.088 US.ST.064.02.125 MSM.00.KFT.001.11 KFT.22.807.971.01.11 KFT.22.807.972.01.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 5  WARNING: Always use suitable tools. Remove the seat and the original parts shown on both sides of the bike. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!  NOTE: When installing the rack at the same time as the SW-MOTECH luggage × × rack (*), screw the parts together as shown in the detailed drawing. Omit screws (2). Instead, install the mounting parts (*) included with the rack.
Page 7 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!  NOTE: The SW-MOTECH anti-theft protection devices are available separately; × mount the anti-theft protection devices on both sides at the marked position. Connect the side supports (10/11) on both sides with the quick-release fasteners (12) to the cross connector (1), fastening tabs (3) and (5/6), and the cross connector (9).
Page 8   ( 27.5 lbs) ( 80 mph)  NOTE:The side carriers were designed exclusively for use with SW-MOTECH adapter kits.  NOTE: Remove the side carriers when riding without luggage. Always use the side carriers in pairs.  WARNING: Make sure that the cases are NOT in the exhaust gas stream after mounting them on the vehicle.
Page 9 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 10 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 11 M6 x 12; ISO 7380 M6 x 25; DIN 7991 M6; DIN 6927 HSK.00.745.025.35GR SC.ST.06.012.02.7380.109 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 MU.ST.06.02.6927.08 KFT.00.152.026.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 12 Tighten the screws as specified in the mounting instructions. 9 Nm Then insert the rubber dampeners (6) into the indicated openings. × × 9 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 13 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 14 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 15 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 16 Ø 20 / ø 8.4 / h 14.5 M6 x 25; ISO 7380 M6; DIN 6927 GPT.00.152.002.11 SC.ST.06.030.02.7380.109 DB.ST.0200.0084.0145.02 SC.ST.06.025.02.7380.109 MU.ST.06.02.6927.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 17  WARNING: Always use suitable tools. Remove the seat and the trim dowels from the rear of the bike The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 18 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original parts shown from the rear of the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 19  WARNING: Use liquid threadlocker. Tighten screws (2) and (6) according to the vehicle manufacturer’s specifications. × × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 20  WARNING: Use liquid threadlocker! Do not tighten screws (11) and (13) yet. × × × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 21 (19) as specified in the mounting instructions. Tighten screws (11) and (13) according to the vehicle manufacturer's specifications. × Mount the seat. 15Nm × × 15Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 22 TÜV regulations. Have any parts requiring registration entered into your vehicle documents by your vehicle inspection authority after they have been installed . The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 23 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 24 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 25 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! M6 x 14; ISO 7380 M6 x 25; DIN 7991 HSK.00.745.025.35GR SC.ST.06.014.02.7380.109 GPT.00.152.035.02 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 26  WARNING: Use a liquid threadlocker! Tighten the screws as specified in the mounting instructions. × 9 Nm × × × 9 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 27 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 28 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 29 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 30 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80000/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 31 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 32 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 33  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 34 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 35 5.2 - Slide the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH side carrier. 5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH side carrier.
Page 36 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 37  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 38  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 39 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 40 Tighten by hand: Indicates that the attachment must be thread lock should be used at this point. carefully tightened by hand. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 41 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.80200/B HSK.00.745.027.02 4 x 10; WN 1452 HSK.00.745.047.02 SC.ST.040.010.48.1452.109 TRX.T20 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 42 1.1 - Press the DUSC release button (1) and pull the lid latch buckle to the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 43 When closing the lid, make sure that the lid limiters (2) are not trapped between the lid and the case body. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 44  WARNING: Over-tightening the screws may damage the lock casing!  NOTE: Ensure that the locking mechanism is in working order! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 45 4.2 - Press the DUSC (1) with the two locking openings onto the mushroom- shaped supports of your SW-MOTECH rack. 4.3 - Press the DUSC (1) with the locking opening onto the locking lug of your SW-MOTECH rack.
Page 46 When reassembling the inlays, make sure to carefully push them behind the frame profiles. Also, press the inlay in the case body onto the Velcro strips. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 47  NOTE: Surface materials may be subject to fluctuations in color (fading) in the event of prolonged and intensive exposure to sunlight and the elements (e.g. smog, acid rain, etc.)! SW-MOTECH is not responsible for this type of wear! The content translation is automated.
Page 48  DANGER: The maximum vehicle load defined by the vehicle manufacturer may NOT be exceeded. The maximum permissible load of the SW-MOTECH rack/side rack may NOT be exceeded; make sure to take into account the dead weight of the product.
Page 49 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
Page 50 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 51 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.500.04 TRX.T20 ALK.00.165.A63 ALK.00.165.562.01 QLS.00.095.520.01 SV.ST.095.007.LK.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 52 1.1 - Press the DUSC release button (*) and pull the lid latch buckle into the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 53  NOTE: Ensure that the locking mechanism is in working order! ×  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 54 Secure the lock (4) on the inside with the safety clip  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 55 4.4 - Then the anti-theft protection device (5) must be secured against unscrewing.  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Page 56 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.

This manual is also suitable for:

Kft.22.807.30000/b Kft.00.152.36000Gpt.22.807.19000/bGpt.00.152.36200/b Hsk.00.745.11001/b Hsk.00.745.12000/b ... Show all