Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..28 Table of Contents 6.8.1 Auxiliary Functions..... 29 1 Safety Instructions......6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........31 Electrical Safety......
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
with, climb on top or inside the • Do not tuck the power cord un- product. Check inside the der the product or to the rear product before use. of the product. Do not put • Use child lock to prevent chil- heavy items on the power dren from intervening with the cord.
• Never connect your product to product for installation and electricity saving devices. Such make sure the electrical mains, systems are harmful to the clean water mains and water product. outlet are suitable. If not, call a qualified electrician and Handling Safety plumber to have them make the necessary arrangements.
Page 7
• Do not install the product at be minimum 0.1 MPa (1 bar) locations where the temperat- and maximum 1MPa (10 bars). ure drops below 0 ºC. 10 to 80 litres of water should • Do not place the product on a be running from the tap in a carpet or similar surface.
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Cover A 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. NOTICE Remove the transportation safety bolts before operating the product. Tilt the machine back slightly. Rest the tabs Otherwise, the product will get of Cover A against the lower panel.
vent the water leaks and resultant dam- of the hose into the waste water or do ages, keep the taps closed when you do not insert it into the drain for more than not use the product. 15 cm. If it is too long, cut it short. 5.
that shall be incurred due to using the Damaged power cables should be product without grounding according to replaced by the authorised service local regulations. in order to prevent possible danger. • Connection must comply with national 4.8 Start Up regulations.
• Tough stains must be treated properly provided for “Loading door cannot be before washing. opened” error in the Troubleshooting • Wash trousers and delicate laundry section. turned inside out. 5.5 Correct Load Capacity • Laundry that are subjected to materials such as flour, lime dust, milk powder, etc.
Page 18
( ) a syphon piece in the softener com- • Please review the programme descrip- tions part for suggested programme for partment, different textiles. ) there is a liquid detergent apparatus • All recommendations about detergents for liquid detergent use in the main wash- are valid for selectable temperature ing compartment.
• Clean with water at its place or by remov- • Wipe the inside of the product with a ing from its place when it is necessary. damp and clean cloth after using starch. Do not forget to place the apparatus in Using Anti-Limescale the main washing compartment (com- •...
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
Page 24
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection programme stages may automatically get shorter. In this way, energy and water con- 1. Determine the programme suitable for sumption would be much less. the type, quantity and soiling level of the • Katoen laundry in accordance with "Programme You can wash your durable cotton laundry and consumption table".
Page 26
• Duvet/Down Wear compartment. Thanks to the special spin profile of the programme, tulles and cur- Use this programme to wash your fibre tains crease less. Do not load your curtains duvets that bear "machine washable" tag. above the specified capacity in order not to Check that you have loaded the duvet cor- damage them.
• Donker textiel • Sportkledij Use this programme to protect the colour You can use this programme to wash of your dark-coloured garments or jeans. It sports and outdoors garments that contain performs high performance washing with cotton/synthetics mix and water repellent special drum movement even if the temper- covers such as gore-tex etc.
ator. It is possible that the recommended If you are not going to unload your laundry temperature value is not the maximum immediately after the programme com- temperature that can be selected for the pletes, you can use Rinse Hold function in current programme.
Select the desired auxiliary functions be- panel will be lit. You can use the Intensive fore starting the programme. Whenever a selection to achieve a better washing per- programme is selected, icons of the auxili- formance when washing heavily soiled ary function symbol that is selected to- laundry.
• Water Saving When the Specialised Programme Select this function by pressing the Water auxiliary function is selected, the Mode auxiliary function key once for all pro- washing performance and energy grams indicated as selectable in the Pro- consumption will be different than gram and Consumption table.
To deactivate wireless connection: • Child Lock Press and hold Remote Control button for 3 Use Child Lock function to prevent children seconds. Countdown “3-2-1” will be dis- from tampering with the machine. Thus you played, and then “Off” symbol will appear can avoid any changes in a running pro- on the display.
6.10 Starting the Programme 1. Press Start / Pause button to start the programme. 2. The Start / Pause button's light which was off before starts to illuminate steadily now, indicating that the pro- In order for the End Time function is activ- gramme has started.
Opening the loading door in case of power 6.12 Changing the Selections After failure: Programme has Started Adding laundry after the programme has In case of power failure, you can use the loading door emergency started handle under the pump filter cap to If the water level in the machine is suitable open the loading door manually.
Changing the programme selection after 6.14 End of Programme programme has started: End symbol appears on the display when The programme change is not allowed the programme is completed. when the current programme is running. If you do not press any button for 10 You can select the new programme after minutes, the machine will switch to OFF switching the current programme to pause...
After the app is setup, with the HomeWhiz 1. If you are adding a device for the first Function, your washing machine can give time, touch “Appliances” tab on the you instant status notifications via your HomeWhiz Application. Select “ADD AP- smart device.
1. Download HomeWhiz Application on the Your washing machine will auto- new smart device you want to use. matically turn off if you cannot real- ize the setup successfully within 5 2. Create a new account and log in to this minutes.
6.15.4 Remote Control Function and machine. And all functions except child lock can be managed through the applica- Its Use tion. After HomeWhiz setup, Wireless Connec- You can follow whether the Remote Control tion will automatically turn on. To activate function is on or off through the function in- or deactivate the wireless connection, dicator on the display.
4. If the connection cannot be established Please note that the consumption with the above processes, repeat the ini- data displayed in the HomeWhiz tial set-up settings on the washing ma- application is intended for informa- chine. tional purposes only and may not If the problem persists, consult an Author- accurately reflect actual usage.
7.2 Cleaning the Loading Door and the 7.4 Cleaning the Water Intake Filters Drum There is a filter at the end of each water in- take valve at the rear of the product and For products with drum cleaning pro- also at the end of each water intake hose gramme, please see the Operating the where they are connected to the tap.
3. Follow the below procedures in order to NOTE: drain water. Foreign substances left in the pump filter may damage your If the product has an emergency water product or may cause noise prob- draining hose, in order to drain the water: lem.
Page 41
Water inside the product. Product stopped shortly after the pro- gramme started. • Some water has remained in the product due to the quality control processes in • Machine has stopped temporarily due to the production. >>> This is not a failure; low voltage.
Page 42
• Number of rinses and/or amount of rins- • Excessive foam has occurred and auto- ing water have increased. >>> Product in- matic foam absorption system has been creases the amount of rinsing water activated due to too much detergent us- when good rinsing is needed and adds an age.
Page 43
• Excessive amount of detergent is used. • Draining hose is folded. >>> Check the >>> Put the detergent in the correct com- drain hose. partment. Do not mix the bleaching agent Laundry became stiff after washing. (**) and the detergent with each other. •...
• The detergent in the main wash compart- Foam is overflowing from the detergent ment got wet while taking in the prewash drawer. water. Holes of the detergent compart- • Too much detergent is used. >>> Mix 1 ment are blocked. >>> Check the holes tablespoonful softener and ½...
Page 45
On the con- by professional repairers (who are not au- trary, such attempts by end-users may thorized by Beko ) shall void the guaran- cause safety issues and damage the tee. product and subsequently cause fire, flood, electrocution and serious personal injury to occur.
Need help?
Do you have a question about the B5WM69418WC and is the answer not in the manual?
Questions and answers