Advertisement
Available languages
Available languages
Cooktop
Installation
1. Visually inspect the cooktop for damage. Also make
sure all cooktop screws are tight (see Figure 5).
Screws
Figure
5
2. Install the retainer brackets. See Figure 6.
The retainer
brackets
MUST be installed,
to meet
local codes or, in their absence,
with the National
Electrical
Code ANSI/NFPA
No. 70--latest
edition
(see Figure 6).
Do not remove the spring spacers on
the edges of the cooktop.
These spacers
center the
cooktop
in the space provided. The cooktop
must be
centered to prevent excess heat buildup that may
result in heat damage or fire (see Figure 7).
Hole located
under the
Spring
burner box to
Spacer (8)
fix the retainer
bracket.
Position
brackets on
unit cutout center line
as shown.
Figure 7
4. Fix the cooktop to the bracket using the screws
supplied (see Figure 7).
3. Set the cooktop into the countertop
cutout.
Cooktop
Countertop
Spacer
Retainer
Bracket
Figure 6
NOTE: Do not use caulking compound;
cooktop
should be removable for service when needed.
Granite
countertop
Installation
Granite Countertop Installation kit Div 22, Src 628, p/n
903061-9010 can be ordered through a Service Center,
by phone at 1=800-4=MY=HOME®or through our web site
at www.partsdirect.com.
Checking
Operation
Refer to the Use and Care Guide for operation.
_Do
not touch cooktop glass or elements,
They may be hot enough to burn you.
Before
You Call for Service
Read the Before You Call for Service Checklist and
operating
instructions
in your Use and Care Guide. It
may save you time and expense. The list includes
common occurrences
that are not the result of
defective workmanship
or materials in this appliance.
Refer to your Use and Care Guide for Sears service
phone numbers, or call 1=800=4=MY=HOME ®.
5
Advertisement
